Preparation and characterization of Fully stoichiometric SrCoO3 by electrochemical oxidation

A nearly stoichiometric SrCoO₃ phase had been prepared up to now only using high oxygen pressure. A new method for preparing fully stoichiometric SrCoO₃ has been proposed using electrochemical oxidation. Brownmillerite-type SrCoO_2.50 is oxidized into a completely stoichiometric perovskite at a potential of 500 mV for 180 hours at room temperature in alkaline media (1 M KOH). The oxidized phase has a cubic unit cell (a=383.5 pm). It is metallic and, at temperatures below T=280 K, it shows ferromagnetic behavior. The magnetic moment at 0 K is 2.1 μ_B. The physical properties of SrCoO_3.00 have been explained in terms of partial occupancy of a σ*e band.     

Synthesis and Structure of Ba[ZrN2] and Ba2[NbN3]

Ba₃N₂ reacts at 950°C under pure N₂ with Zr to yield dark red, air-sensitive Ba[ZrN₂]. This new compound crystallizes in the tetragonal space group P4/nmm with a = 416.10(2), c = 839.2(1) pm and Z = 2. The crystal structure was solved and refined using X-ray and neutron powder diffraction data. In the nitrido zirconate [ZrN₂]^2? the Zr atoms exhibit a square-pyramidal coordination by five N atoms at distances of 201(3) and 220.2(2) pm. The pyramids share all the edges in the basal plane to form layers parallel to (001) with their apices alternately pointing up and down. The Ba²⁺ cations are integrated into these layers at the levels of the pyramidal apices. The structure can be interpreted as a stuffed PbFCl type. Ba₂[NbN₃] is formed by the reaction of Ba₃N₂ and NbN or of Ba and Nb at 1 000°C under N₂. Isostructural to Ba₂[TaN₃] it crystallizes in the monoclinic space group C2/c with a = 613.2(3), b = 1 176.8(3), c = 1 322.9(4) pm, β = 91.65(2)°, Z = 8. The nitrido niobate anions form chains of corner sharing NbN₄ tetrahedra with distances Nb? N between 188(1) and 199.9(9) pm.     

Zur Kenntnis von BaTiVO4 und SrTiVO4

On BaTiVO₄ and SrTiVO₄ BaTiVO₄ and SrTiVO₄ were prepared in closed systems by solid state reactions. They crystallize with orthorhombic symmetry (BaTiVO₄: space group D-Pmnb; a = 5.889; b = 7.889; c ?10.397 Å; Z = 4; SrTiVO₄: space group D-P2¹,2¹,2¹,2¹; a = 5.855; b = 7.572; c = 10.012 Å; Z = 4) and belong to β-K₂SO₄-type. The ordered occupation of point positions by Ba²⁺ and Tl⁺ as well as the decrease in symmetry of SrTiVO₄ are discussed.     

Crystal structure of the parent misfit-layered cobalt oxide [Sr2O2]qCoO2

The crystal structure of our newly discovered Sr-Co-O phase is investigated in detail through high-resolution electron microscopy (HREM) techniques. Electron diffraction (ED) measurement together with energy dispersive X-ray spectroscopy (EDS) analysis show that an ampoule-synthesized sample contains an unknown Sr-Co-O ternary phase with monoclinic symmetry and the cation ratio of Sr/Co=1. From HREM images a layered structure with a regular stacking of a CdI₂-type CoO₂ sheet and a rock-salt-type Sr₂O₂ double-layered block is observed, which confirms that the phase is the parent of the more complex “misfit-layered (ML)” cobalt oxides of [M_mA₂O_m+2]_qCoO₂ with the formula of [Sr₂O₂]_qCoO₂, i.e. m=0. It is revealed that the misfit parameter q is 0.5, i.e. the two sublattices of the CoO₂ sheet and the Sr₂O₂ block coexist to form a commensurate composite structure. We propose a structural model with monoclinic P2₁/m symmetry, which is supported by simulations of ED patterns and HREM images based on dynamical diffraction theory.     

Strukturen aus AIB2− und BaAl4−analogen Einheiten. I Die Verbindungen Sr4Pd5P5 und Sr2Pd3P3

Structures with AIB₂? and BaAl₄?type Units. I The Compounds Sr₄Pd₅P₅ and Sr₂Pd₃P₃ Sr₄Pd₅P₅ (Cmcm, a = 4.177(1) Å, b = 31.377(5) Å, c = 8.581(2) Å, Z = 4) und Sr₂ Pd₃P₃(Pmmm, a = 4.199(1) Å, b = 4.212(1) Å, c = 34.227(4) Å, Z = 4) have been prepared by heating the elements. Both structures contain exclusively units characteristic for the AIB_2? and BaAl₄?type. The ratio between isolated P-atoms and P₂?pairs is interpreted with an ionic splitting of the formulas.     

Synthesis and characterization of new strontium 4-carboxyphenylphosphonates

Several new strontium 4-carboxyphenylphosphonates, i.e., two modifications of Sr(HOOCC₆H₄PO₃H)₂, SrH(OOCC₆H₄PO₃)·H₂O, Sr₃(OOCC₆H₄PO₃)₂·4H₂O and Sr₃(OOCC₆H₄PO₃)₂·5.7H₂O were prepared and characterized by elemental analysis, thermogravimetry, X-ray powder diffraction and infrared spectroscopy. It was found that the compositions of these compounds depend on the acidity of the reaction medium. In addition, the presented compounds are interconvertible in dependence on pH. The position of the acid hydrogen atom in SrH(OOCC₆H₄PO₃)·H₂O was determined from the IR spectra of the studied compounds.The structure of the β modification of Sr(HOOCC₆H₄PO₃H)₂ was solved from its X-ray powder diffraction pattern using an ab initio method (the FOX program) with subsequent Rietveld refinement in the FULLPROF program. The compound is monoclinic, with the space group P2₁/c (No. 14), a=49.88(2), b=7.867(2), c=5.602(3) Å, β=128.68(2)°, and Z=4. It has a one-dimensional structure with an inorganic part built of SrO₈ distorted tetragonal antiprisms.     

LiM2(NCN)Br3 (M = Sr,Eu): Synthesis and Crystal Structures of Solid‐State Carbodiimides with Empty Tetrahedral Metal Entities

Two solid‐state carbodiimide compounds, LiM₂(NCN)Br₃ (M = Sr, Eu), with characteristic empty tetrahedral M₄ entities have been synthesized using a flux route, and their structures were determined by single‐crystal X‐ray diffraction. The new phases LiSr₂(NCN)Br₃ and LiEu₂(NCN)Br₃ are isotypical with the corresponding iodides and crystallize in the cubic system (( , Z = 16) but with smaller unit cells (a = 14.641(1) Å for LiSr₂(NCN)Br₃ and 14.572(1) Å for LiEu₂(NCN)Br₃). The extended structures comprise two interpenetrating three‐dimensional networks: the first one is built from isolated M₄ tetrahedra capped by NCN^2? anions on their triangular faces while the second is made from vertex‐sharing LiBr₆ octahedra. The linear NCN^2? anions exhibit the symmetrical carbodiimide shape and serve as linkers between the tetrahedral entities.     

Investigation of the Crystallisation Behaviour of Lead Titanate (PT), Lead Zirconate (PZ) and Lead Zirconate Titanate (PZT) by EXAFS-Spectroscopy and X-Ray Diffraction

Two solid solutions of lead zirconium titanates PbZr _x Ti_{1 – x} O₃ (x = 0.1 and 0.35) as well as the reference compounds lead titanate and lead zirconate were prepared from zirconium and titanium n-propoxide, dissolved in 2-methoxyethanol, by sol-gel process. The amorphous products after pyrolysis of the dried gels and the crystalline phases were studied by EXAFS spectroscopy to monitor the structural changes from the amorphous oxide mixture to the crystalline ceramics after calcination. Additionally, the crystalline phases were identified by X-ray diffraction (XRD).It follows from the analysis of the EXAFS data that the local order of the amorphous phases seems to be completely different from that of the crystalline phase. There is no indication of a preformation of the local order of the perovskite structure. The analysis of our EXAFS spectra can be interpreted very consistently with the assumption that in the amorphous samples a segregation exists on molecular level and the low crystallisation temperatures are a consequence of very short diffusion paths.     

Reaction Mechanisms of Strontium Ferrites Synthesis

The reactions between strontium and iron nitrates have been studied in an open atmosphere system using three different molar ratios, 1:1 (I), 1:2 (II) and 2:1 (III) at different temperatures as pointed out from the DTA data. The reaction mechanism was discussed based on the chemical composition characterized by means of thermal analysis, X‐ray diffraction patterns, infrared spectra and magnetic susceptibility. It was found that the reaction products depend on both temperature of reaction and the ratio between reactants. The reaction products were found to be composed of a variety of iron compounds that possess different valences: SrFeO_2.86, SrFeO_2.97, SrFe₂O₄, SrFe₁₂O₁₉, Sr₂Fe₂O₅ and Sr₇Fe₁₀O₂₂ in addition to some accessory reaction products namely α‐Fe₂O₃ and FeO(OH).     

Potentiometrische Titration von Sulfat, Barium und Strontium mit Hilfe einer bleisensitiven Elektrode

Zusammenfassung Die bleisensitive Elektrode der Fa. Orion spricht neben Bleiionen auch auf Sulfationen an. Dies ermöglicht die potentiometrische Titration von Sulfat mit Bariumperchlorat sowie die Titration von Barium und Strontium mit Natriumsulfat. Der günstigste pH-Bereich liegt zwischen 5 und 7. Titriermedium sind Dioxan-Wasser-Gemische. Die Verfahren sind sehr empfindlich und erlauben in allen Fällen die Titration bis herab zu 5·10^–4 mMol.Anwendungsbeispiele für die Bestimmung von Schwefel in organischen Verbindungen nach Schöniger- oder Wickbold-Verbrennung sind angegeben.

---

Potentiometric titration of sulphate, barium and strontium by means of a lead-sensitive electrode

The Orion lead electrode was found to be responsive not only to lead ions but to sulphate ions, too. This offers possibilities to titrate sulphate with barium perchlorate and reversely barium and strontium with sodium sulphate. The useful pH range is 5–7. Dioxan-water mixtures serve as solvents. The described methods are highly sensitive and allow determinations down to 5×10^–4 millimoles.Examples are given for the determination of sulphur in organic samples after combustion according to Schöniger or Wickbold.