热导式热量计特征热谱方程的建立

Based on the interfacial model of a conduction calorimeter, a characteristic thermogram equation is suggested in this paper. Measurements of only two quantities such as the maximum peak height △m and its time tm, enables us to calculate the peak height at any interval by using this model. Thermograms of alkaline hydrolysis of ethyl propionate and ethyl acetate have been measured at 25℃, respectively. The themographic data calculated by using the characteristic thermogram equation are in reasonable agreement with those read from the thermograms.     

Effect of evaporation temperature on the formation of particulate membranes from crystalline polymers by dry-cast process

The membrane formation of crystalline poly(ethylene-co-vinyl alcohol) (EVAL), poly(vinylidene fluoride) (PVDF), and polyamide (Nylon-66) membranes prepared by dry-cast process was studied. Membrane morphologies from crystalline polymers were found to be strongly dependent on the evaporation temperature. At low temperatures, all the casting solution evaporated into a particulate morphology that was governed by the polymer crystallization mechanism. The rise in the evaporation temperature changed EVAL membrane structure from a particulate to a dense morphology. However, as the temperature increased PVDF and Nylon-66 membranes still exhibited particulate morphologies. The membrane structures obtained were discussed in terms of the characteristics of polymer crystallization in the casting solution theoretically. At elevated temperatures the crystallization was restricted for the EVAL membrane because the increase rate in the polymer concentration was fast relative to the time necessary for growth of nuclei. Nonetheless, the time available for PVDF and Nylon-66 with stronger crystalline properties was large enough to form the crystallization-controlled particulate structure that differed in particle size only. In addition, particles in the PVDF membrane were driven together to disappear the boundary, but those in the Nylon-66 membrane exhibited features of linear grain boundary. The difference in particle morphology was attributed to the Nylon-66 with the most strongly crystalline property. Therefore, the kinetic difference in the crystallization rate of the polymer solution play an important role in dominating the membrane structure by dry-cast process.     

Anti-solvent assisted treatment for improved morphology and efficiency of lead acetate derived perovskite solar cells

An efficient solution-processable route employing Pb(Ac)₂ as lead source and anti-solvent treatment to achieve fully covered and homogenous perovskite films is reported.     

The influence of methacryloxypropyltrimethoxysilane on the sol-gel process of TEOS

The influence of MPS on the hydrolysis and condensation process of TEOS is studied by means of hydrolysis time (t _H) and gelation time (t _G) curves. The addition of MPS to a mixture of TEOS, ethanol and water results in a substantial increase in t _G. The increase is most pronounced when adding takes place in the acid step of the sol-gel process of TEOS.In acid environment hydrolysis of MPS will be dominant compared to hydrolysis of TEOS. This results in an effective decrease of the amount of water available for the hydrolysis of TEOS. However, this decrease in water concentration cannot explain the complete effect of the addition of MPS. The hydrolysed MPS will also be incorporated in the gel network and will strongly influence the cross-linking ability. The lesser functionality of MPS compared to TEOS and the steric hindrance of the acrylate group results in a large increase in t _G.     

Conformational Studies on Polytripeptides as a Model of Collagen

To study the role of glycine residues in stabilizing the collagen triple helix, the glycine residues in the polytripeptide (Pro-Ala-Gly)_n were partially replaced by alanine. The proline content was kept constant. The stability of the helical conformation of these polypeptides was studied by IR- and X-ray measurements in the solid state and by ORD, CD and viscometry in solution. The renaturation was followed as a function of time. All the polytripeptides studied, with the exception of (-Pro-Ala-Ala-)_n attained the polyproline II conformation. However the stability decreased with increasing alanine content. Obviously the molecules of (-Pro-Ala-Gly-) are highly associated by intermolecular hydrogen bonds and one may therefore suppose that a triple-stranded helix aggregation occurs. The results of the refolding process show that the stability of the helices seems to also affect the refolding rate in terms of the optical rotation, Two transitions appeared: the first one is responsible for a rapid reversible change in conformation and the second one for a further slow and irreversible change in the hydrodynamic shape. The latter seems to be due to the partial helical nature, leading to higher chain mobility.     

Optical Spectroscopy Properties of KMgF3 ：Eu^2＋ Nanocrystals and Powder Synthesized by Microemulsion and Solvothermal Process

IntroductionPerovskite complex fluorides have attracted great ainterest due to their particular physical properties, suchas piezoelectric characteristics[1], ferromagnetic prop-erty[2], nonmagnetic insulator behavior[3], and photo-luminescence host functi…     

聚碳酸酯合成工艺开发的新进展

本文从工艺开发的角度，简要评介了目前聚碳酸酯两大工业生产工艺，即光气化界面缩聚工艺和熔融酯交换缩聚工艺的研究开发新动向。     

Stimultaneous quantitative analysis using dual capillary columns of different polarities

Complex organic mixtures, such as coal liquefaction and oil shale products and by-products, are comprised of hundreds or thousands of individual components. State-of-the-art high resolution gas chromatography does not always provide sufficient resolution to allow accurate quantitation or identification of many compounds of interest. The concept of dual capillary column chromatography combines the different resolving characteristics of two capillary columns coated with different stationary phases into a single chromatographic run. In this approach, both columns are connected to the same injection port. Analysis of complex mixtures in this fashion can confirm the identification and quantitation of components on two columns of different polarity with little increased analysis time, can provide a means of obtaining quantitative data for individual components which are known to coelute on any one column, and can alert one to unknown coelution problems that would be undetected by gas chromatographic analysis on a single capillary column. Simultaneous dual column analysis was applied to three samples, the neutral polycyclic aromatic hydrocarbon (PAH) fraction of a Solvent Refined Coal-II (SRC-II) heavy distillate, the nitrogen-containing polycyclic aromatic compound (N-PAC) fraction of an SRC-II heavy distillate, and the basic fraction from a shale oil process water. Fused silica capillary columns coated with SE-54 and Durawax 3 were used for the analyses of the heavy distillate, while SE-54 an Carbowax 20M capillary columns were used for the analysis of the process water.     

Sequential injection analysis system for on-line monitoring of l-cysteine concentration in biological processes

A sequential injection analysis (SIA) system was developed to monitor the concentration of l-cysteine in biological processes on-line. It is based on the redox reaction of l-cysteine with iron(III) in the presence of 1,10-phenanthroline (phen) and the detection of the red-iron(II)-phen complex with a spectrophotometry. The system was fully automated using software written in the LabVIEW™ development environment. A number of system variables such as the flow rate of the carrier buffer solution, the volume ratio of the sample to the reagents, and the reaction coil length, etc., were evaluated to increase the sensitivity and performance of the SIA system. Under partially optimized operating conditions the performance of the SIA system was linear up to a concentration of l-cysteine of 1 mM (R² = 0.998) with a detection limit of 0.005 mM and a sample frequency of 15 hr⁻¹. The SIA system was employed to monitor the concentration of l-cysteine on-line in a continuously stirred reactor and a fermentation process of Saccharomyces cerevisiae. The on-line monitored data were in good agreement with the off-line data measured by a HPLC with a fluorescence detector (n = 15, R² = 09899).     

Synthesis of nanosized TiO2/SiO2 particles using microwave processes and their photocatalytic activity on the decomposition of orange II

The nanosized titania and TiO₂/SiO₂ particles were prepared by the microwave-hydrothermal method. The effect of physical properties TTIP/TEOS ratio and calcination temperature has been investigated. The major phase of the pure TiO₂ particle is of the anatase structure, and a rutile peak was observed above 800°C. In TiO₂/SiO₂ particles, however, no significant rutile phase was observed, although the calcination temperature was 900°C. No peaks for the silica crystal phase were observed at either silica/titania ratio. The crystallite size of TiO₂/SiO₂ particles decreases as compared to pure TiO₂ at high calcination temperatures. The TiO₂/SiO₂ particles show higher activity on the photocatalytic decomposition of orange II as compared to pure TiO₂ particles.