Synthesis of Stimuli-responsive Nanoparticles by Solution Polymerization

In this study, stimuli-responsive nanoparticles were prepared by solution polymerization. Two synthesis routes are proposed to synthesize the particles, the monomer route and the polymer/monomer route. For the monomer route, pH and thermal sensitive nanoparticles were synthesized from acrylic acid and N-isopropylacrylamide. For the polymer/monomer route, the pH sensitive nanoparticles were synthesized from chitosan and acrylic acid. The effect of reaction time, initiator concentration and agitation rate on the particle size and the size distribution were investigated. The stimuli-responsive nanoparticles could be directly blended with other polymers to prepare stimuli-responsive functional membranes.     

The Copolymerization of Alkenes with Maleic Anhydride

The investigations presented deal with the experimental results of the copolymerization of maleic anhydride (MAn) with alkenes. The course of the reaction is explained by the overall rate of the copolymerization (v _Br), which correlates with the solution viscosity of the copolymer, and the dependence of the v _Br maximum on the mole ratio of the monomers at constant total monomer concentration. The use of solvents with increasing donor power leads to increased complexing of the free MAn molecules and of the MAn radical chain ends. The results demonstrate that, for low 1-alkenes, the addition of the MAn chain radical is the rate-determining step of the copolymerization. As the substituents on the olefinic double bond become larger or the double bond shifts to the 1,2-position, the addition of MAn to the hydrocarbon radical becomes more and more the rate-determining step. On the other hand, an increase of the CT complexation of the MAn polymer radical by use of donor solvents decreases the alkene addition rate.     

基于3,6-二肼基-1,2,4,5-四嗪的两种高氮含能离子盐

本文通过3,6-二肼基-1,2,4,5-四嗪(DHT)分别与高氯酸和硝酸反应得到2种高氮含能离子盐,并通过X-射线单晶衍射技术对它们的结构进行了表征。(DHT)(NO₃)₂(1)属于单斜晶系,C2/c空间群,晶胞参数:a=1.3000(6)nm,b=0.8349(3)nm,c=1.0187(5)nm,β=118.89(5)°,Z=4;(DHT)(ClO₄)₂(2)属于正交晶系,P2₁2₁2空间群,晶胞参数:a=0.9804(4)nm,b=1.0747(4)nm,c=0.5325(2)nm,Z=2。采用DSC和TG-DTG技术研究了这两种含能离子盐的热分解机理,并对这两种含能离子盐的非等温动力学、爆热及感度进行了测试分析。研究表明这两种含能离子盐在敏感型含能材料领域具有潜在的应用前景。     

基于3,6-二肼基-1,2,4,5-四嗪的两种高氮含能离子盐

本文通过3,6-二肼基-1,2,4,5-四嗪(DHT)分别与高氯酸和硝酸反应得到2种高氮含能离子盐,并通过X-射线单晶衍射技术对它们的结构进行了表征。(DHT)(NO₃)₂(1)属于单斜晶系,C2/c空间群,晶胞参数：a=1.300 0(6) nm,b=0.834 9(3) nm,c=1.018 7(5) nm,β=118.89(5)°,Z=4;(DHT)(ClO₄)₂(2)属于正交晶系,P2₁2₁2空间群,晶胞参数：a=0.980 4(4) nm,b=1.074 7(4) nm,c=0.532 5(2) nm,Z=2。采用DSC和TG-DTG技术研究了这两种含能离子盐的热分解机理,并对这两种含能离子盐的非等温动力学、爆热及感度进行了测试分析。研究表明这两种含能离子盐在敏感型含能材料领域具有潜在的应用前景。     

Preparation,Crystal Structure,and Thermal Decomposition of the Intriguing Five‐coordinated Compound [Cu(IMI)4Cl]Cl (IMI = Imidazole)

The intriguing multi‐ligand compound [Cu(IMI)₄Cl]Cl ( 1 ) with the ligand imidazole (IMI) was synthesized and characterized by elemental analysis and FT‐IR spectroscopy. The crystal structure was determined by X‐ray single crystal diffraction and the crystallographic data showed that the compound belongs to the monoclinic P2₁/n space group [α = 8.847(2) Å, b = 13.210(3) Å, c = 13.870(3) Å, and β = 90.164(3)°]. Furthermore, the Cu^II ion is five‐coordinated by four nitrogen atoms from four imidazole ligands and a chlorine atom. The thermal decomposition mechanism was determined based on differential scanning calorimetry (DSC) and thermogravimetric (TG‐DTG) analysis. The non‐isothermal kinetics parameters were calculated by the Kissinger's method and Ozawa's method, respectively. The energy of combustion, enthalpy of formation, critical temperature of thermal explosion, entropy of activation (ΔS^≠), enthalpy of activation (ΔH^≠), and free energy of activation (ΔG^≠) were measured and calculated.     

Development of an automated dual‐mode supercritical fluid chromatography and reversed‐phase liquid chromatography mass‐directed purification system for small‐molecule drug discovery

We report the development of a dual‐mode mass‐directed supercritical fluid chromatography and reversed‐phase liquid chromatography purification system. The addition of a third pump allows for flexible mobile phase control between the two techniques, and enables operation of either chromatography mode within minutes by activation of a set of switching valves on a single system. Software control, fluidic pathways, interface to the mass spectrometer, and fraction collection have been modified for compatibility between both separation methods. The conditioning solvent and tuning parameters for the mass spectrometer were adjusted to achieve an ideal signal trace in either mode with good linearity (r² > 0.970) over a range of concentrations and minimal noise for accurate peak detection and isolation. The registration success rate is 90% and overall sample recovery for either technique is 80?90%. Combining two orthogonal separation and purification modes in one single system has improved the purification throughput of complex mixtures and has been a valuable, cost‐saving tool in our laboratory.     

单金纳米棒的光散射分析化学:径向比与分析灵敏度的关系

单纳米颗粒作为信号感应单元在化学与生物传感应用中已引起广泛关注.本文通过暗场显微成像(iDFM)研究了不同径向比金纳米棒的光散射性质.将iDFM与扫描电子显微镜(SEM)结合表征种子生长法制备的金纳米棒,结果发现,因局域表面等离子体共振而展示出的红色散射光随单个金纳米棒的径向比增大逐渐红移,且金纳米棒对其周围介质折光率(RI)变化的敏感程度随径向比增大而增大.这一结果对设计高灵敏的生物纳米传感器、提高分析检测的灵敏度具有很好的指导意义.     

Constructing novel red-emitting Ba2Y0.8Eu0.2NbO6:Mn4+ phosphors for multi-type luminescent thermometers and high-security anti-counterfeiting films

To date, luminescent materials have been preferably used for non-contact optical thermometers. In this manner, novel red-emitting Ba₂Y_0.8Eu_0.2NbO₆:Mn⁴⁺ (BYEN:Mn⁴⁺) phosphors were designed for multi-type non-contact luminescent thermometers based on the dual-emission states and temperature-dependent lifetime (TDL) models. In the temperature range of 303–483 K, the sensing sensitivities based on the dual-emission states of (⁵D₀→⁷F₂, ²E_g→⁴A_2g) and (⁵D₀→⁷F₁, ²E_g→⁴A_2g) were estimated. Especially, the maximum absolute sensing sensitivity (S_a) was found to be about 0.1558 K^-1 for the BYEN:0.007Mn⁴⁺ phosphor based on the ⁵D₀→⁷F₁ and ²E_g→⁴A_2g positions. This phosphor also exhibited good relative sensing sensitivity (S_r) (0.0186 K^-1) based on the ⁵D₀→⁷F₂ and ²E_g→⁴A_2g states. Besides, the relative sensing sensitivities (S_R) at ⁵D₀→⁷F₁ and ²E_g→⁴A_2g transitions were estimated to be 0.0034 and 0.0194 K^-1, respectively with the help of the TDL technique. In the light of these results, novel red-emitting Ba₂Y_0.8Eu_0.2NbO₆:Mn⁴⁺ phosphors are expected to be a potentially attractive candidate for applications in multi-type luminescent thermometers. Finally, a novel unique polydimethylsiloxane film exhibiting tricolor-luminescent emissions was introduced and further suggested for high-security anti-counterfeiting.     

Effect of selected dopants on conductivity and moisture stability of Li3PS4 sulfide solid electrolyte: a first-principles study

The first principle computational screening was performed to investigate the effect of selected dopants for Li₃PS₄ sulfide solid electrolyte on its ionic conductivity and stability toward moisture. The results suggest that substitution P⁵⁺ using isovalent cations whose electronegativity (EN) value is closer to the value of S has more significant effects on the ionic conductivity, whereby W⁵⁺ and Sb⁵⁺ can improve most. Similarly, aliovalent cation substitutions with compensating changes in the lithium-ion concentration, particularly those with a lower oxidation state and higher EN, such as Cu²⁺, effectively enhance the lithium-ion conductivity in this structure. For cation dopants, it is found that ionic conductivity improvement of Li₃PS₄ is the synergetic effect of EN and oxidation number of the dopant as well as the material's lattice parameter change. Oxides of the considered cation dopants can also improve the ionic conductivity of the material but have much lower lithium-ion conductivity than the cases of cation dopants. However, the metal oxide dopants, particularly those derived from soft Lewis' acid cations, show a marginal improvement in moisture stability of the Li₃PS₄ electrolyte. The effect of halides and metal halide dopants on the lithium-ion conductivity and moisture stability of Li₃PS₄ electrolyte are also studied. It is found that metal halides are more effective than any other dopants in improving the ionic conductivity of Li₃PS₄.