薄透镜厚度引起焦距测量误差的探究

从理想光具组的焦距公式出发,理论上分析了薄透镜厚度引起焦距测量的误差。采用物距像距法测定焦距,并与二次成像法测得的焦距比较,得出实验结论：采用物距像距法测量焦距,因薄透镜厚度引起的误差大小等于物距像距法测得的焦距与二次成像法测得的焦距之差;由于薄透镜的厚度越厚,折射越靠近光心,所测得的焦距值会偏小,因此对厚度引起的系统误差进行修正,得到修正后的焦距为fm＋Δf。     

Measurement of Focusing Properties of Axially Asymmetric Lenses Using Moire Technique

Most lenses composed of spherical or aspherical surfaces have symmetrical focusing properties about an optical axis. On the other hand, unconventional optical systems such as cylindrical lenses, astigmatic or progressive power glasses have axially asymmetrical focusing properties. In this study, the method of measuring focusing properties by the moire technique is extended to asymmetrical lenses. Some unconventional lenses were experimentally tested, and the focusing power in the interesting region and azimuthal direction of the aperture was evaluated.     

LDC-CNTFET: A carbon nanotube field effect transistor with linear doping profile channel

In this paper, a novel carbon nanotube field effect transistor with linear doping profile channel (LDC-CNTFET) is presented. The channel impurity concentration of the proposed structure is at maximum level at source side and linearly decreases toward zero at drain side. The simulation results show that the leakage current, on-off current ratio, subthreshold swing, drain induced barrier lowering, and voltage gain of the proposed structure improve in comparison with conventional CNTFET. Also, due to spreading the impurity throughout the channel region, the proposed structure has superior performance compared with a single halo CNTFET structure with equal saturation current. Design considerations show that the proposed structure enhances the device performance all over a wide range of channel lengths.     

机翼后缘噪声预测研究

机翼后缘噪声是飞机重要的机体噪声源之一。本文基于CFD(Computational Fluid Dynamic)数值模拟和Ffcows Williams-Hall理论,研究应用了一种预测干净机翼后缘气动噪声的方法。采用Menter’s SSTκ-ω湍流模型对翼型和机翼进行N-S方程数值模拟得到后缘附近的湍流特征速度和特征长度,再利用Serhat Hosder的预估方法计算后缘噪声强度级。本文首先计算了NACA0012翼型在7种不同状态的后缘噪声,计算结果与实验值比较,符合很好,从而证明了本文采用的方法的可行性和正确性;然后研究了两个亚音速翼型(NACA 0009,NACA 0012),两个超临界翼型(SC(2)- 0710,SC(2)-0714),EET机翼的不同参数对后缘噪声强度级的影响,得出了对降低后缘噪声有参考意义的结论。     

Novel method to determine effective length of quantum confinement using fractional-dimension space approach

The binding energy and effective mass of a polaron confined in a GaAs film deposited on an Al_xGa_1-x As substrate are investigated, for different film thickness values and aluminum concentrations and within the framework of the fractional-dimensional space approach. Using this scheme, we propose a new method to define the effective length of the quantum confinement. The limitations of the definition of the original effective well width are discussed, and the binding energy and effective mass of a polaron confined in a GaAs film are obtained. The fractional-dimensional theoretical results are shown to be in good agreement with previous, more detailed calculations based on second-order perturbation theory.     

Some angular| dependences of the ion-electron emission coefficient

In the cases when primary ion beam direction is aligned with close-packed planes the dependences of the reduced coefficient of ion-electron emission on various angles has been studied. It was found that there are such ranges of azimuthal angle and angle of incidence of primary ion beam within which the reduced coefficient is determined mainly by the angle between the primary ion beam and close-packed plane only.     

Stable surface termination on vicinal 6H-SiC(0 0 0 1) surfaces

Ordered nanofacet structures on vicinal 6H-SiC(0 0 0 1) surfaces, consisting of pairs of a (0 0 0 1) basal plane and a facet, are investigated in terms of stable surface stacking of the (0 0 0 1) basal planes. The surface termination of S3 (or S3*), i.e., ABC (or A*C*B*), was suggested by a structural model based on quantized step-bunching, which typically gives a one-unit-cell bunched step configuration at the facet. Here, we evaluate the surface termination at basal planes covered with a layer of silicon oxynitride by means of quantitative low-energy electron diffraction (LEED) analysis combined with scanning tunneling microscopy (STM), and show the validity of the structural model proposed.     

若干In2Se3 化合物的晶体结构与电子特性

等离激元是金属中自由电子的集体振荡,其在物理,生物、化学、能源、信息等领域具有重要的应用前景。近些年来对等离激元量子效应研究的深入开展使得等离激元研究迈入了新阶段。本文首先简要介绍了等离激元的两个基本特性：光压缩效应和局域电场增强效应;随后回顾了量子等离激元方面的最新的进展,包括量子纠缠效应,量子尺寸效应,量子遂穿效应,等离激元在台阶势垒处的反射与激发,等离激元对电子相干效应的增强;最后对量子等离激元研究进行了总结和展望。     

Effect of Time-Dependent Atomic Scattering Length on Solitons in Bose-Einstein Condensates with a Complex Potential

We consider the one-dimensional nonlinear Schrǒdinger equations that describe the dynamics of a Bose-Einstein Condensates with time-dependent scattering length in a complex potential. Our results show that as long as the integrable relation is satisfied, exact solutions of the one-dimensional nonlinear Schrǒdinger equation can be found in a general closed form, and interactions between two solitons are modulated in a complex potential We find that the changes of the scattering length and trapping potential can be effectively used to control the interaction between two bright soliton.     

A novel method for sacrificial layer release in MEMS devices fabrication

During the forming process of the free-standing structure or the functional cavity when releasing the high aspect ratio sacrificial layer,such structures tend to stick to the substrate due to capillary force.This paper describes the application of pull-in length conception as design rules to a novel ’dimpled’ method in releasing sacrificial layer.Based on the conception of pull-in length in adhering phenomenon,the fabrication and releasing sacrificial layer methods using micro bumps based on the silicon substrate were presented.According to the thermal isolation performances of one kind of micro electromechanical system device thermal shear stress sensor,the sacrificial layers were validated to be successfully released.