Modification to the Fringe Component of Diffraction Coefficient in TD-EEC Method

A modified formulation for fringe component of diffraction coefficient is implemented to TD-EEC method. An example of diffraction by perfectly conducting plate is used to illustrate our scheme. Comparing with the FDTD results we observe that the improved expression for fringe component is more accurate than that of Michaeli's formulation. This high frequency time domain technique is available for treating the bistatic scattering problems for millimeter waves.     

基于分层光学扫描的三维数字化测量技术

采用切削分层光扫描测量与计算机数据信息合成相结合的方法，有效地解决了具有复杂内外腔结构零件的三维数字化测量。该方法比传统三维测量速度快、自动化程度高，能同时准确测量零件内外腔表面，零件边缘测量误差可控制在CCD两个像素内。利用获取的铝合金精密小箱体三维数据，在计算机上重构了零件的三维模型，并用RP技术制造出了零件物理原形。     

一种精确检测细胞真实边缘的算法

分析了传统边缘检测算法在细胞边缘检测和形态分析中存在的缺陷。提出了最佳阈值分割和轮廓提取相结合的细胞边缘检测新方法。通过理论分析和实验,证明该方法能有效抑制噪声干扰的影响,实现细胞真实边缘的精确检测。     

一种基于强边缘块的时域多分辨率图像分割算法

针对序列图像的变化检测,提出了一种基于强边缘块的时域多分辨率图像分割算法.首先在具有明显边缘特征的图像序列中,提取图像强边缘块的直方图,然后,利用时域多分辨算法,比较不同帧之间的图像差异.这种方法不但能够检测出图像的变化,而且能够确定图像变化的类型.在阈值的选取过程中,采用了自适应阈值方法,实验证明这种方法取得了较好的效果.     

Evidence for diffusion-limited kinetics during electromigration-induced step bunching on Si(1 1 1)

We have measured how the initial terrace width l₀ on vicinal Si(1 1 1) surfaces influences the rate of step bunching and the minimum terrace width within a bunch when direct-current heated at 940-1290 °C. A comparison of this data with analytic solutions and numerical simulations of the conventional “sharp-step” model give strong evidence that the kinetic length d is relatively small (d < ∼20 nm) in both temperature regime I (∼850-950 °C) and regime III (∼1200-1300 °C), in which step-down current is required for step bunching. This indicates that surface mass transport is diffusion-limited in both regimes I and III when l₀ > 20 nm, and hence that the adatom attachment- and terrace diffusion-hopping rates are of comparable magnitude. We also observe similar scaling with initial terrace width in temperature regime II (∼1040-1190 °C), in which step-up current is required for bunching, suggesting a similar step bunching mechanism in all three temperature regimes.     

Orientation and structure of triple step staircase on vicinal Si(1 1 1) surfaces

The vicinal Si(1 1 1) surface, inclined towards the direction, was investigated by scanning tunnelling microscopy and spot profile analysing low energy electron diffraction. It has been established that the surface, consisting of regularly spaced triple steps and (1 1 1) terraces with a width equal to that of a single unit cell of the Si(1 1 1)-7 × 7 surface structure, has the (7 7 10) orientation. An atomic model of the triple step is proposed.     

模拟蚂蚁觅食行为的乳腺钙化点边缘提取

针对计算机辅助乳腺癌诊断中钙化点的提取具有较大难度的问题,计算了乳腺数字图像中每个像素点的最大梯度值。首先按照等梯度合并的原则将像素点划分为像素组,按照等分整个梯度区间的原则给定初始梯度聚类中心,模拟蚁群觅食行为中学习机制,以概率选择的方式进行像素点组的聚类得到新的聚类中心,然后再以模糊C均值法(FCM)对得到的聚类进行优化,从而提取出属于钙化点边缘的像素点。实验证明,通过选择适当的参数,用此方法提取乳腺钙化点边缘的效果良好。     

多纵模激光F-P标准具双边缘测风可行性分析

讨论采用多纵模激光器作探测光源用于双边缘多普勒激光雷达测风的可行性。给出了多纵模激光器谐振腔腔长与边缘滤波器F-P标准具腔长之间的关系。分析了多纵模双边缘测风的主要特性,计算灵敏度、信噪比和径向测速误差,并与单纵模测风性能进行对比。可用类似单纵模测风中动态频率跟踪技术解决多纵模激光器频率漂移问题。     

干涉条纹边缘检测方法的比较与改进

研究了干涉条纹边缘检测中的Sobel算子和Laplacian算子,针对二者使干涉条纹变粗和模糊的现象,提出了改进的Laplacian算子。该改进算子先对干涉条纹利用Gauss函数进行平滑,然后再作Laplacian变换。实验结果表明,改进的Laplacian算子克服经典算子的不足,获得清晰的条纹边缘,满足了干涉条纹后续处理要求。     

基于数字图像处理方法的焦距测量技术研究

介绍了基于数字图像处理方法测量透镜焦距的玻罗板分划线快速自动甄别法。该图像处理方法鲁棒性好,采用Canny法进行分划线边缘检测。用重心法计算所有线条的重心,从重心往两边搜索线条,判断选取间隔大的刻划线对,可以提高测量精度。实验数据表明该方法的相对测量不确定度能达到8.5×10-4。为实现以数字图象处理为基础的焦距客观测量提供了一种可行的技术途径。