可燃介质中飞行圆球诱导斜爆轰的流场结构

基于带化学反应的二维轴对称Euler方程,利用带有Superbee限制函数的波传播算法,对氢/氧/氮预混气中飞行圆球诱导斜爆轰进行了数值模拟。结果表明,在达姆科勒数Da略大于临界情形时,圆球诱导的驻定爆轰是一个由强过驱斜爆轰、弱过驱斜爆轰、反应激波和惰性激波组合而成的复合结构。波后的圆球绕流流场内存在2个亚音速区和1个超音速区。在圆球背风表面,还形成了第2道斜激波。     

钡铁氧体前驱体高能球磨过程的红外拟合光谱分析

高能球磨法是材料制备过程中常用的方法,通过物料在高速运转的过程中进行磨合而产生晶体空位缺陷,实现元素的掺杂,进而发生化学吸附或化学反应,合成产生新的物相,对于后续合成材料的性能有很大影响.钡铁氧体具有良好的磁性能,被用于功能材料制备的诸多领域.采用高能球磨法制备钡铁氧体前驱体,利用XRD,SEM和FTIR检测方法考察不...     

氢化物发生原子荧光法测定钢铁中微痕量碲

碲是钢铁的微痕量有害杂质,易引发晶间脆化和微裂纹,降低材料的力学与抗疲劳性能,危及船海装备的服役安全,需要准确快速的检测和控制。原标准方法GB/T 223.55—2008《钢铁及合金碲含量的测定示波极谱法》使用滴汞电极,存在局部汞富集与危及人员健康和水体环境的风险。伴随《关于汞的水俣公约》在国内外的全面生效,该方法已于2017年废止。钢铁中碲的检验迫切呼唤绿色环保、准确快速的分析方法。基于碲可被新生态氢还原为易挥发氢化物的特点,采用氢化物发生进样技术从基体溶液中高选择性地分离和富集碲,并联用原子荧光法测定钢铁中微痕量碲。实验优化了负高压、灯电流、观察高度、载气流量、屏蔽气流量等光谱仪的工作参数,研究确定了消解用酸、试液介质、溶液酸度、载流酸度与硼氢化钾浓度等氢化物发生条件,系统考察了铁基体与铬、镍、锰、铜、钼、钨、钛、硅、钒等共存离子的干扰效应及掩蔽方法。确定的条件参数如下,负高压：360 V,灯电流：70～80 mA,观察高度：7～8 mm,载气流量：700 mL·min^-1,屏蔽气流量：700～800 mL·min^-1,试液介质：15%盐...     

Conventional vs. Microwave- or Mechanically-Assisted Synthesis of Dihomooxacalix[4]arene Phthalimides: NMR,X-ray and Photophysical Analysis §

Direct O-alkylation of p-tert-butyldihomooxacalix[4]arene (1) with N-(bromopropyl)- or N-(bromoethyl)phthalimides and K₂CO₃ in acetonitrile was conducted under conventional heating (reflux) and using microwave irradiation and ball milling methodologies. The reactions afforded mono- and mainly distal di-substituted derivatives in the cone conformation, in a total of eight compounds. They were isolated by column chromatography, and their conformations and the substitution patterns were established by NMR spectroscopy (¹H, ¹³C, COSY and NOESY experiments). The X-ray structures of four dihomooxacalix[4]arene phthalimide derivatives (2a, 3a, 3b and 5a) are reported, as well as their photophysical properties. The microwave (MW)-assisted alkylations drastically reduced the reaction times (from days to less than 45 min) and produced higher yields of both 1,3-di-substituted phthalimides (3a and 6a) with higher selectivity. Ball milling did not reveal to be a good method for this kind of reaction.     

Efficient Preparation of Small-Sized Transition Metal Dichalcogenide Nanosheets by Polymer-Assisted Ball Milling

Two-dimensional (2D) transition metal dichalcogenide nanosheets (TMDC NSs) have attracted growing interest due to their unique structure and properties. Although various methods have been developed to prepare TMDC NSs, there is still a great need for a novel strategy combining simplicity, generality, and high efficiency. In this study, we developed a novel polymer-assisted ball milling method for the efficient preparation of TMDC NSs with small sizes. The use of polymers can enhance the interaction of milling balls and TMDC materials, facilitate the exfoliation process, and prevent the exfoliated nanosheets from aggregating. The WSe₂ NSs prepared by carboxymethyl cellulose sodium (CMC)-assisted ball milling have small lateral sizes (8~40 nm) with a high yield (~60%). The influence of the experimental conditions (polymer, milling time, and rotation speed) on the size and yield of the nanosheets was studied. Moreover, the present approach is also effective in producing other TMDC NSs, such as MoS₂, WS₂, and MoSe₂. This study demonstrates that polymer-assisted ball milling is a simple, general, and effective method for the preparation of small-sized TMDC NSs.     

柴油爆炸性能外场实验研究

通过Ø30 mm杀爆燃弹外场炮击实验,模拟车辆、装备油箱被炮火击中后二次爆炸场景,采用高速照相机、红外热成像仪分别记录引爆柴油过程和爆炸火球的温度场,对比评估普通柴油、含水型柴油和抑爆型柴油的爆炸特性。实验结果显示：炮弹射击油箱瞬间,柴油液滴被抛撒出油箱,与空气快速混合形成气溶胶,并在炸药能量作用下引发爆炸,形成爆炸火球;不同类型柴油的爆炸火球均经历3个发展阶段,但其尺寸、扩展速率和表面温度等有较大差别,普通柴油和含水型柴油的火球这3个参数比较接近,都大于抑爆型柴油;含水型柴油的油箱毁伤容积为108.00 dm³,远高于普通柴油的57.65 dm³和抑爆型柴油的38.15 dm³。研究表明,抑爆柴油中的高分子聚合物能起到较好的抑爆作用。

     

K+掺杂双钙钛矿Cs2AgInCl6的发光性质

采用固相球磨法制备了K⁺掺杂双钙钛矿Cs₂AgInCl₆纳米材料,该方法无需配体辅助,绿色环保。通过X射线衍射和拉曼光谱对晶体结构进行研究,通过激发光谱、发射光谱和时间分辨光谱对其发光性能进行研究。结果表明,Cs₂AgInCl₆为立方晶体,属于Fm3m空间群,由于宇称禁戒跃迁,其荧光量子产率(PLQY)低,小于0.1%。低于60%的K⁺掺杂主要取代Ag⁺的位置,引起Cs₂AgInCl₆的晶格膨胀,消除了晶格结构的反演对称性,打破了宇称禁戒跃迁,掺杂后Cs₂AgInCl₆的光致发光强度显著增强。K⁺的最佳掺杂比例为40%,Cs₂Ag_0.6K_0.4InCl₆材料发射中心波长为640 nm,半高宽为180 nm,平均荧光寿命达到29.2 ns,PLQY达到10.5%。当K⁺掺杂比例超过60%,K⁺开始取代Cs⁺的位置,产物发生相变,出现立方相的Cs_2-xK_1+x-yAg_yInCl₆和单斜相的Cs_2-xK_1+xInCl₆产物,这些产物由于强电子-声子耦合,非辐射复合占据主导地位。     

Benign‐by‐Design Solventless Mechanochemical Synthesis of Three‐, Two‐, and One‐Dimensional Hybrid Perovskites

Organic–inorganic hybrid perovskites have attracted significant attention owing to their extraordinary optoelectronic properties with applications in the fields of solar energy, lighting, photodetectors, and lasers. The rational design of these hybrid materials is a key factor in the optimization of their performance in perovskite‐based devices. Herein, a mechanochemical approach is proposed as a highly efficient, simple, and reproducible method for the preparation of four types of hybrid perovskites, which were obtained in large amounts as polycrystalline powders with high purity and excellent optoelectronics properties. Two archetypal three‐dimensional (3D) perovskites (MAPbI₃ and FAPbI₃) were synthesized, together with a bidimensional (2D) perovskite (Gua₂PbI₄) and a “double‐chain” one‐dimensional (1D) perovskite (GuaPbI₃), whose structure was elucidated by X‐ray diffraction.     

Mg／Mgl．8La0．2Ni纳米复合材料的吸放氢性能研究

应用高能球磨法制备Mg-x％Mg1.8La0.2Ni（x=10、20和30）纳米复合储氢材料．X射线衍射（XRD）、透射电镜（TEM）和选区电子衍射（SAED）测试表明，该复合材料具有纳米晶和非晶态混合结构的性质，吸氢温度降低，较好的吸放氢动力学性能，在423K，2．5MPa氢压的条件下，50s内即可达到最大吸氢量．     

多复变中正规权Zygmund空间上的几个性质

本文讨论了多复变中单位球上正规权Zygmund空间Z_μ(B)的一些性质.首先给出了Z_μ(B)函数的一种积分表示,接着证明了Z_μ(B)是正规权Bergman空间A_v~1(B)的对偶空间,其对偶对按如下形式给出:■,其中v(p)=(1-ρ~2)~(β+1)μ~(-1)(ρ)(0≤ρ<1)并且β>max{0,b-1}.最后作为积分表示和对偶的一个应用,作者给出了Z_μ(B)中每个函数的一个原子分解.