Instantaneous work hardening behaviour of two-phase tungsten heavy alloys: a phenomenological approach

ABSTRACT

The present work describes a phenomenological approach to explain the instantaneous behaviour of tungsten heavy alloys (WHAs) in heat-treated and swaged conditions. The strengths and elongation values of heat-treated materials are lower and higher than those of the swaged samples respectively. The heat-treated materials exhibit two slopes in true stress–true plastic strain curves and follow the Ludwigson constitutive equation. On the other hand, swaged materials display a single slope and adhere to typical Swift constitutive equation. The latter reflect the presence of pre-strain in the materials due to swaging deformation. The fracture surfaces in heat-treated materials consist of W-W decohesion along with matrix rupture and W-cleavage, while swaged samples consist of mainly W-cleavage. Both the materials display three typical stages (I, II and III) of work hardening. The second derivatives of true stress–true plastic strain curves of these alloys exhibit a perfect parabola although the nature of true stress–true strain as well as true stress–true plastic strain curves is quite different in heat-treated and swaged materials. This has been observed for the first time in WHAs consisting of matrix and W-grains. The shape of the parabola is simple and easy to fit. The fitting parameters of parabolas have been successfully employed to explain the flow behaviour of a large number of tungsten heavy alloys having two-phase microstructure in different processing conditions.     

稀土在中国高新材料研制开发中的应用

我国在稀土资源和稀土原料的生产方面都居世界领先地位，近年来稀土高新材料的研制与开发也取得重大进展。本文概述了我国在稀土高新材料开发与研究方面的成果，指出今后应把稀土应用基础研究、中重稀土的应用研究和稀土在能源领域的应用研究作为重点进一步开展工作。     

i氨合成催化剂的研究进展*

高稳定性、高活性、低成本的氨合成催化剂的研究已成为新的研究热点。本文从载体的制备和改性方法、钌活性组分还原与负载、助剂的机理及其作用等方面简要地介绍了氧化物负载钌催化剂的最新研究进展,此外,结合密度泛函理论的计算和实验研究成果,介绍了合金型催化剂特别是熔铁型合金催化剂、氮化物金属合金体系及负载型多金属氨合成催化剂的研究现状,指出了氧化物负载钌催化剂及合金型催化剂研究存在的一些问题并展望了氨合成催化剂的发展前景。     

The Direct Synthesis of Hydrogen Peroxide Using Platinum‐Promoted Gold–Palladium Catalysts

The direct synthesis of hydrogen peroxide offers a potentially green route to the production of this important commodity chemical. Early studies showed that Pd is a suitable catalyst, but recent work indicated that the addition of Au enhances the activity and selectivity significantly. The addition of a third metal using impregnation as a facile preparation method was thus investigated. The addition of a small amount of Pt to a CeO₂‐supported AuPd (weight ratio of 1:1) catalyst significantly enhanced the activity in the direct synthesis of H₂O₂ and decreased the non‐desired over‐hydrogenation and decomposition reactions. The addition of Pt to the AuPd nanoparticles influenced the surface composition, thus leading to the marked effects that were observed on the catalytic formation of hydrogen peroxide. In addition, an experimental approach that can help to identify the optimal nominal ternary alloy compositions for this reaction is demonstrated.     

Electrolytic Formation of Crystalline Silicon/Germanium Alloy Nanotubes and Hollow Particles with Enhanced Lithium‐Storage Properties

Crystalline silicon(Si)/germanium(Ge) alloy nanotubes and hollow particles are synthesized for the first time through a one‐pot electrolytic process. The morphology of these alloy structures can be easily tailored from nanotubes to hollow particles by varying the overpotential during the electro‐reduction reaction. The continuous solid diffusion governed by the nanoscale Kirkendall effect results in the formation of inner void in the alloy particles. Benefitting from the compositional and structural advantages, these SiGe alloy nanotubes exhibit much enhanced lithium‐storage performance compared with the individual solid Si and Ge nanowires as the anode material for lithium‐ion batteries.     

稀土元素对R-Y-Ni系A2B7型无镁储氢合金微观结构和电化学性能的影响

采用真空电弧熔炼及退火处理制备R-Y-Ni系A_2B_7型R0.3Y0.7Ni3.25Mn0.15Al0.1(R=Y,La,Pr,Ce,Nd,Gd,Sm)储氢合金,系统研究稀土元素R对合金微观组织与结构、储氢和电化学性能的影响。XRD和SEM-EDS分析表明,合金退火组织由Ce2Ni7型主相、PuNi3型及少量Ca Cu5型相组成,Ce2Ni7型主相的晶格常数a、c及晶胞体积V均随稀土R原子半径的减小而依次降低。该合金均具有明显的吸放氢平台,常温下最大吸氢容量为1.17%~1.48%(w/w),吸氢平台压Peq为0.037~0.194 MPa。电化学分析表明,退火合金电极的电化学活化性能优良,R=La合金具有最高的放电容量(389.2 mAh·g-1)和较佳的容量保持率(充放电循环100次后的S100=85.7%),其中合金微观组织的不均匀性及稀土元素的电化学腐蚀是影响电极循环稳定性的主要原因。合金电极的高倍率放电性能(电流密度为900 m A·g-1)HRD900=71.05%~86.94%,其电极反应动力学控制步骤主要由氢原子在合金体相中的扩散速率所控制。     

Atomic‐Level Alloying and De‐alloying in Doped Gold Nanoparticles

Atomically precise alloying and de‐alloying processes for the formation of Ag–Au and Cu–Au nanoparticles of 25‐metal‐atom composition (referred to as Ag_xAu_25?x(SR)₁₈ and Cu_xAu_25?x(SR)₁₈, in which R=CH₂CH₂Ph) are reported. The identities of the particles were determined by matrix‐assisted laser desorption ionization mass spectroscopy (MALDI‐MS). Their structures were probed by fragmentation analysis in MALDI‐MS and comparison with the icosahedral structure of the homogold Au₂₅(SR)₁₈ nanoparticles (an icosahedral Au₁₃ core protected by a shell of Au₁₂(SR)₁₈). The Cu and Ag atoms were found to preferentially occupy the 13‐atom icosahedral sites, instead of the exterior shell. The number of Ag atoms in Ag_xAu_25?x(SR)₁₈ (x=0–8) was dependent on the molar ratio of Ag^I/Au^III precursors in the synthesis, whereas the number of Cu atoms in Cu_xAu_25?x(SR)₁₈ (x=0–4) was independent of the molar ratio of Cu^II/Au^III precursors applied. Interestingly, the Cu_xAu_25?x(SR)₁₈ nanoparticles show a spontaneous de‐alloying process over time, and the initially formed Cu_xAu_25?x(SR)₁₈ nanoparticles were converted to pure Au₂₅(SR)₁₈. This de‐alloying process was not observed in the case of alloyed Ag_xAu_25?x(SR)₁₈ nanoparticles. This contrast can be attributed to the stability difference between Cu_xAu_25?x(SR)₁₈ and Ag_xAu_25?x(SR)₁₈ nanoparticles. These alloyed nanoparticles are promising candidates for applications such as catalysis.     

Electroactive conducting polymers for corrosion control

There is an intensive effort underway to develop new corrosion control coatings for structural metals. In part, this effort has been motivated by the desire to replace chromium(VI)-containing coatings currently used for corrosion control of iron and aluminum alloys. Cr(VI) has been shown to be hazardous to the environmental and to human health, and its use in many countries will be sharply curtailed in the coming years. Electroactive conducting polymers (ECPs) represent a class of interesting materials currently being explored for use in corrosion control coating systems, possibly as a replacement for Cr(VI)-based coatings. The electroactivity and the electronic conductivity (or semiconductivity) of ECPs set them apart from traditional organic coatings. As with chromate, interesting and potentially beneficial interactions of ECPs with active metal alloys such as steel and aluminum are anticipated, with concomitant alteration of their corrosion behavior. A review of this active research area will be presented in two parts. Here in Part 1, a general introduction to the topic of corrosion control by ECPs will be presented, including an overview of corrosion and its control by traditional methods, an introduction to ECPs and their properties, and a discussion of the processing issues surrounding the use of ECPs as coatings. Part 1 also includes a review of the literature on the use of ECPs as coatings (or components of coatings) on non-ferrous active metals, principally aluminum and aluminum alloys, although some work on zinc, copper, silver, titanium and silicon will also be described. In Part 2 of this review (to be published in the next issue of this journal), the rather extensive literature on the use of ECPs for the corrosion control of ferrous alloys (steels) will be reviewed. Electronic Publication     

La2O3对钛合金表面镍基喷焊涂层组织和性能的影响

采用火焰喷焊技术在钛合金基体上制备了不加La2O3和加4％(质量分数)La2O3两种镍基涂层，分析了它们的显微组织、合金元素的扩散、显微硬度以及耐磨性能。结果表明：La2O3的加人，改善了涂层合金的流动性和显微组织的均匀性，并使涂层与基体的熔合更加明显，结合性能得到进一步提高；虽然一定程度上减弱了基体Ti元素对喷焊层的强化作用，使表层显微硬度略有下降，但磨损失重却较未加La2O3的喷焊涂层下降了20％。     

Assessing the biocompatibility of NiTi shape memory alloys used for medical applications

The present paper reviews aspects related to the biocompatibility of NiTi shape memory alloys used for medical applications. These smart metallic materials, which are characterised by outstanding mechanical properties, have been gaining increasing importance over the last two decades in many minimal invasive surgery and diagnostic applications, as well as for other uses, such as in orthodontic appliances. Due to the presence of high amounts of Ni, the cytotoxicity of such alloys is under scrutiny. In this review paper we analyse work published on the biocompatibility of NiTi alloys, considering aspects related to: (1) corrosion properties and the different methods used to test them, as well as specimen surface states; (2) biocompatibility tests in vitro and in vivo; (3) the release of Ni ions. It is shown that NiTi shape memory alloys are generally characterised by good corrosion properties, in most cases superior to those of conventional stainless steel or Co–Cr–Mo-based biomedical materials. The majority of biocompatibility studies suggest that these alloys have low cytotoxicity (both in vitro and in vivo) as well as low genotoxicity. The release of Ni ions depends on the surface state and the surface chemistry. Smooth surfaces with well-controlled structures and chemistries of the outermost protective TiO₂ layer lead to negligible release of Ni ions, with concentrations below the normal human daily intake.