Influence of surface structure on surface analytical statements

The influence of surface structure of technical materials on results and statements of surface analytical methods has been investigated. Especially surface roughness as a typical property of rolled products has been observed. For this purpose samples of steel (technical surface, roughness up to 5 m) and silicon wafers (polished surface) have been analyzed by SNMS and GDOS in order to get information about changes of the surface roughness as function of the sputtering time and their influence on the statements about the depth profiles obtained.     

Surfactant in the gaseous phase II. Influence on stability of foams and thin liquid films

The influence of the vapors ofn-amyl orn-decyl alcohol on the stability of single thin liquid films, single bubbles, and foam columns was determined. It was found that the presence of surfactant vapors lowered the stability of foams and single foam films. The mechanism of the destabilizing action of the surfactant vapors on wet, dynamic foams under dynamic conditions is discussed. It is shown that the destabilizing action of the surfactant vapors is a further indication that surface elasticity forces are the main factor determining stability of wet, dynamic foams.     

ToF‐SIMS observation of PTFE surfaces modified by α‐particle irradiation

The surface structure of polytetrafluoroethylene (PTFE) upon α‐particle irradiation has been investigated at doses in the range of 1 × 10⁷ to 1 × 10¹¹ Rad and compared with the surface structure of the unirradiated polymer. Both neat and 25% fiberglass content PTFE were studied. The samples, maintained at nominal room temperature, were irradiated in vacuum by 5.5 MeV ⁴He²⁺ ions generated in a tandem accelerator beam line. Static time‐of‐flight SIMS (ToF‐SIMS) was employed to probe chemical changes at the surface as a function of the irradiation level. In general, the data are indicative of increased cross‐linking at α‐doses less than 1 × 10⁹ Rad, followed by increased fragmentation and unsaturation at α‐doses greater than 1 × 10⁹ Rad. Throughout the irradiation regime, scission is a constant factor promoting cross‐linking, branching, and unsaturation. However, at α‐doses greater than 1 × 10¹⁰ Rad, extreme structural degradation of the polymer becomes evident and is accompanied by conversion to oxygen‐functionalized and aliphatic compounds. Thus, for PTFE in an α‐particle field, an upper exposure limit of ～10¹⁰ Rad is essential for nominal retention of molecular structure. Finally, a quantitative relationship between α‐dose and characteristic fragment ion intensity is developed. Copyright © 2005 John Wiley & Sons, Ltd.     

Far infrared surface plasmon propagation

New experimental evidence is presented which shows that, contrary to an earlier report, far-infrared surface plasmons at metal-air interfaces propagate long distances (tens of centimeters or longer).     

Optimization of Ultrasonic-Assisted Extraction of Active Components and Antioxidant Activity from Polygala tenuifolia: A Comparative Study of the Response Surface Methodology and Least Squares Support Vector Machine

Dried roots of Polygala tenuifolia (YuanZhi in Chinese) are widely used in Chinese herbal medicine. These components in YuanZhi have significant anti-oxidation properties owing to high levels of 3,6’-disinapoylsucrose (DISS) and Polygalaxanthone III (PolyIII). In order to efficiently extract natural medicines, response surface methodology (RSM) and least squares support vector machine (LSSVM) were used for the modeling and optimization of ultrasound-assisted extraction of DISS and PolyIII together to determine the antioxidant activity of the extracts obtained from YuanZhi. For the optimal combination of the comprehensive yield of DISS and PolyIII (Y), the Box-Behnken design (BBD) was used to improve extraction time (X₁), extraction temperature (X₂), liquid–solid ratio (X₃), and ethanol concentration (X₄). The optimal process parameters were determined to be as follows: extraction time, 93 min; liquid–solid ratio, 40 mL/g; extraction temperature, 48 °C; and ethanol concentration, 67%. With these conditions, the predictive optimal combination comprehensive evaluation value is 13.0217. It was clear that the LS-SVM model had higher accuracy in predictive and optimization capabilities, with higher antioxidant activity and lower relative deviations values, than did RSM. Hence, the LS-SVM model proved to be more effective for the analysis and improvement of the extraction process.     

套管磨损三维表面形貌恢复及其机理分析

在DCWT-1000型套管摩擦磨损试验机上进行了套管摩擦磨损试验,研究深井、超深井中"冲击-滑动"复合磨损对套管磨损行为的影响,采用三维表面形貌测试仪、光学显微镜及扫描电子显微镜观察分析了在不同载荷条件下套管磨损表面的微观结构和表面形貌,在此基础上对套管磨损表面进行了三维恢复并计算套管磨损表面的主要形貌参数,探讨了套管磨损表面的磨损机理.结果表明:套管的磨损性能与载荷有关;在不同载荷条件下,套管磨损表面的三维形貌具有不同特点,且主要的表面形貌参数与载荷呈现出较好的相关性,证明了三维形貌分析方法能够真实反映套管磨损表面的情况;当冲击载荷和频率不大时,套管的磨损机制以磨粒磨损为主,兼有粘着磨损,随着冲击载荷和频率增加,套管磨损表面出现明显粘着剥落和疲劳剥落迹象,并出现疲劳裂纹扩展和连通,套管的磨损机制向粘着磨损和疲劳磨损转化,磨损趋向严重.     

关于Young-Laplace公式的吉布斯自由能证明

对于为论证球形液滴附加压强的Young-Laplace公式而设计的一个理想实验,有文献试图借助吉布斯自由能函数进行证明,本文给出符合这一条件的证明方法.     

Mechanism Study on Nanoparticle Negative Surface Charge Modification by Ascorbyl Palmitate and Its Improvement of Tumor Targeting Ability

Surface charge polarity and density influence the immune clearance and cellular uptake of intravenously administered lipid nanoparticles (LNPs), thus determining the efficiency of their delivery to the target. Here, we modified the surface charge with ascorbyl palmitate (AsP) used as a negatively charged lipid. AsP-PC-LNPs were prepared by dispersion and ultrasonication of AsP and phosphatidylcholine (PC) composite films at various ratios. AsP inserted into the PC film with its polar head outward. The pK_a for AsP was 4.34, and its ion form conferred the LNPs with negative surface charge. Zeta potentials were correlated with the amount and distribution of AsP on the LNPs surface. DSC, Raman and FTIR spectra, and molecular dynamics simulations disclosed that AsP distributed homogeneously in PC at 1–8% (w/w), and there were strong hydrogen bonds between the polar heads of AsP and PC (PO²⁻), which favored LNPs’ stability. But at AsP:PC > 8% (w/w), the excessive AsP changed the interaction modes between AsP and PC. The AsP–PC composite films became inhomogeneous, and their phase transition behaviors and Raman and FTIR spectra were altered. Our results clarified the mechanism of surface charge modification by AsP and provided a rational use of AsP as a charged lipid to modify LNP surface properties in targeted drug delivery systems. Furthermore, AsP–PC composites were used as phospholipid-based biological membranes to prepare paclitaxel-loaded LNPs, which had stable surface negative charge, better tumor targeting and tumor inhibitory effects.     

In Vitro and In Vivo Human Body Odor Analysis Method Using GO:PANI/ZNRs/ZIF−8 Adsorbent Followed by GC/MS

Among various volatile organic compounds (VOCs) emitted from human skin, trans-2-nonenal, benzothiazole, hexyl salicylate, α-hexyl cinnamaldehyde, and isopropyl palmitate are key indicators associated with the degrees of aging. In our study, extraction and determination methods of human body odor are newly developed using headspace-in needle microextraction (HS-INME). The adsorbent was synthesized with graphene oxide:polyaniline/zinc nanorods/zeolitic imidazolate framework-8 (GO:PANI/ZNRs/ZIF−8). Then, a wire coated with the adsorbent was placed into the adsorption kit to be directly exposed to human skin as in vivo sampling and inserted into the needle so that it was able to be desorbed at the GC injector. The adsorption kit was made in-house with a 3D printer. For the in vitro method, the wire coated with the adsorbent was inserted into the needle and exposed to the headspace of the vial. When a cotton T-shirt containing body odor was transferred to a vial, the headspace of the vial was saturated with body odor VOCs. After volatile organic compounds were adsorbed in the dynamic mode, the needle was transferred to the injector for analysis of the volatile organic compounds by gas chromatography/mass spectrometry (GC/MS). The conditions of adsorbent fabrication and extraction for body odor compounds were optimized by response surface methodology (RSM). In conclusion, it was able to synthesize GO:PANI/ZNRs/ZIF−8 at the optimal condition and applicable to both in vivo and in vitro methods for body odor VOCs analysis.     

Single-Stage Extraction and Separation of Co2+ from Ni2+ Using Ionic Liquid of [C4H9NH3][Cyanex 272]

The purpose of this study was to optimize the extraction conditions for separating Co²⁺ from Ni²⁺ using N-butylamine phosphinate ionic liquid of [C₄H₉NH₃][Cyanex 272]. A Box–Behnken design of response surface methodology was used to analyze the effects of the initial pH, extraction time, and extraction temperature on the separation factor of Co²⁺ from sulfuric acid solution containing Ni²⁺. The concentrations of Co²⁺ and Ni²⁺ in an aqueous solution were determined using inductively coupled plasma-optical emission spectrometry. The optimized extraction conditions were as follows: an initial pH of 3.7, an extraction time of 55.8 min, and an extraction temperature of 330.4 K. The separation factor of Co²⁺ from Ni²⁺ under optimized extraction conditions was 66.1, which was very close to the predicted value of 67.2, and the error was 1.7%. The equation for single-stage extraction with high reliability can be used for optimizing the multi-stage extraction process of Co²⁺ from Ni²⁺. The stoichiometry of chemical reaction for ion-exchange extraction was also investigated using the slope method.