Cooperative spectrum sharing MIMO systems with successive decoding

A spectrum sharing system with primary and secondary nodes, each equipped with an arbitrary number of antennas, is investigated. Particularly, the outage performance of an underlay cognitive system is analytically studied, in the case when the end-to-end ($e2e$) communication is established via an intermediate relay node. To better enhance the $e2e$ communication, successive interference cancellation (SIC) is adopted, which compensates for both the transmission power constraint and the presence of interference from primary nodes. Both the relay and secondary receiver perform unordered SIC to successively decode the multiple streams, whereas the decode-and-forward relaying protocol is used for the $e2e$ communication. New closed-form expressions for the $e2e$ outage performance of each transmitted stream are derived in terms of finite sum series of the Tricomi confluent hypergeometric function. In addition, simplified yet tight approximations for the asymptotic outage performance are obtained. Useful engineering insights are manifested, such as the diversity order of the considered system and the impact of interference from the primary nodes in conjunction with the constrained transmission power of the secondary nodes.     

An evaluation method for nanoscale wrinkle

In this paper, a spectrum-based wrinkling analysis method via two-dimensional Fourier transformation is proposed aiming to solve the difficulty of nanoscale wrinkle evaluation. It evaluates the wrinkle characteristics including wrinkling wavelength and direction simply using a single wrinkling image. Based on this method, the evaluation results of nanoscale wrinkle characteristics show agreement with the open experimental results within an error of 6%. It is also verified to be appropriate for the macro wrinkle evaluation without scale limitations. The spectrum-based wrinkling analysis is an effective method for nanoscale evaluation, which contributes to reveal the mechanism of nanoscale wrinkling.     

取向比对椭球气溶胶粒子散射特性的影响

利用T矩阵和离散坐标法研究了取向比对椭球粒子散射特性的影响, 计算了小尺度范围内椭球粒子的散射特征参量, 包括消光效率因子、不对称因子、单次散射反照率、散射相矩阵及双向反射函数(BRDF). 结果表明, 椭球粒子的散射特性与取向比密切相关, 粒子取向比会影响散射参量的振荡频率和振幅, 与球形粒子散射参量的相对差异也呈周期振荡趋势. 研究还发现, 某些特殊粒子尺寸的散射参量与粒子取向比基本无关. 在多次散射条件下, 分析不同取向比粒子群的BRDF随反射角和光学厚度的变化特性. 结果显示: 不同取向比粒子群的BRDF随反射角的变化趋势基本一致, 球形粒子群比非球形粒子群的BRDF曲线波动振幅更大; 球形-非球形粒子的BRDF相对差异随光学厚度和取向比的增大而减小, 随入射角的增大而增大.     

光生物节律因子计算模型的研究

通过实验测量额头温度拟合光生物节律因子-额温差曲线,对现有评价光生物效应作用大小的BioEq模型和CLA模型的计算结果进行分析比较.利用不同图片LCD屏幕的光谱计算节律因子,发现两种模型对于绿色波段的光抑制较强,而对红色波段的光则与实际不相符.通过对九种不同颜色的LED光源测试额头温度,比较模型计算结果与实际光生物效应的作用,发现光生物节律因子与生理体征变化线性递增,其中对BioEq模型的直线拟合相关度达到0.95.     

980nm半导体激光器输出光谱特性的改善

为了改善980nm半导体激光器的输出光谱特性,采用传输矩阵分析法推导了双布喇格光纤光栅谐振腔的传输表达式,对布喇格光纤光栅长度和谐振腔腔长对输出光谱的影响进行模拟仿真,结果表明布喇格光纤光栅长度对输出光谱的影响大于谐振腔腔长对输出光谱的影响,加长布喇格光纤光栅长度能压缩输出光谱线宽.在980nm半导体激光器尾纤上写入不同布喇格光纤光栅长度的双布喇格光纤光栅谐振腔,验证了引入双布喇格光纤光栅谐振腔在压缩980nm半导体激光器输出光谱线宽的同时改善了其输出光谱的稳定性.当环境温度在0~75℃范围内变化时,980nm半导体激光器输出中心波长仅变化0.06nm.     

基于U型弯曲光纤模间干涉的折射率传感

研究了去包层U型弯曲光纤的折射率传感特性.首先根据模间干涉理论,分析了U型光纤传感器的传感原理,指出干涉谱损耗峰波长与环境折射率和弯曲半径有关.利用单模光纤(SM-28)实验制作不同曲率半径的U型光纤传感器,把传感器的U型部分浸入不同折射率的液体中,研究其折射率传感特性.当U型光纤曲率半径为2.5~5.0mm时,传输光谱中均能观察到明显的模间干涉现象;当液体折射率从1.30RIU变到1.43RIU时,光谱损耗峰波长发生红移,且弯曲半径越大,折射率传感灵敏度越高;在曲率半径为5mm时灵敏度为207nm/RIU(折射率1.30~1.40RIU)和1 220nm/RIU(折射率1.40~1.42RIU).干涉峰的波形参量(半高宽、对比度)决定于包层模和纤芯导模之间的比例,当曲率半径为4mm时,损耗峰半高宽最小达3.2nm.综合半高宽和灵敏度两个参量,得出曲率半径4.5mm的U型光纤传感器品质因素最高,分别为43.1RIU-1(折射率1.30~1.40RIU)和191.2RIU-1(折射率1.40~1.42RIU),可直接由SM-28单模光纤制成,且制作工艺简单、成本低、机械强度高不需要任何特殊处理,具有很好的应用前景.     

Influence of Titanium Dioxide Content on the Crystallization Behavior and Solar Reflectance of Polyethylene/Titanium Dioxide Composites

Titanium dioxide (TiO₂) particles were introduced to improve the solar reflectance of high-density polyethylene (HDPE). The organic-inorganic hybrids were fabricated by melt blending. A series of characterizations were taken to study the crystallization behavior, morphology, solar reflectance, and real cooling property. TiO₂ particles acted as nucleation agents in the HDPE matrix and made the HDPE form thick lamellar crystals. TiO₂ particles could disperse well into the HDPE matrix under 2.5 wt.% loading but agglomerated with 3 wt.%. Solar reflectance was related to the reflective index of TiO₂ and the microstructure of HDPE. The real cooling property depended on the solar reflectance and the dispersion of the TiO₂ particles in the HDPE matrix.     

原位漫反射傅里叶变换红外光谱研究锰铁基催化剂上低温选择性催化还原反应机理简

采用自蔓延燃烧法制备了Ti_0.9Mn_0.05Fe_0.05O_2-δ催化剂,运用原位漫反射傅里叶变换红外光谱对该催化剂的NO和NH₃稳态吸附以及NO和NH₃瞬态反应进行了详细地分析与讨论. 结果表明,相比于Lewis酸性位,150℃时Brönsted酸性位吸附的NH₃更具有SCR活性;与双齿硝酸盐和桥式硝酸盐相比,NO吸附产生的单齿硝酸盐是主要的中间物种;该SCR反应遵循Eley-Rideal和Langmuir-Hinshelwood机理,但以后者为主. 另外,O₂的存在有利于NO的氧化和配位态NH₃的活化.     

Dispersion analysis of triclinic K2Cr2O7

Polarized IR-reflection spectra of a single crystal of K₂Cr₂O₇ were recorded at near normal incidence. Dispersion analysis was applied, taking fully into account the triclinic symmetry of the crystal and the measuring conditions, to determine the oscillator parameters. The oscillator parameters and the dielectric background tensor were proven valid by comparison between measured and based on these parameters modeled spectra of a randomly oriented polycrystalline sample.     

原位漫反射红外光谱法研究SO2对Ag/Al2O3选择性催化丙烯还原NOx反应的影响

 以Ag/Al2O3为催化剂,采用原位漫反射傅里叶变换红外光谱法研究了SO2对C3H6选择性还原NOx反应的影响. 结果表明, SO2在催化剂表面转化为硫酸盐,并且随着硫酸盐累积量的增加,其主要红外特征吸收峰由低波数向高波数漂移. 高浓度表面硫酸盐的存在不仅抑制了催化剂表面硝酸盐的生成,而且抑制了硝酸盐与表面烯醇式物种(RCH=CH-O-)或乙酸盐物种进一步反应,生成活泼的反应中间体异氰酸酯(-NCO), 这是导致Ag/Al2O3催化剂上C3H6选择性还原NOx活性降低的主要原因.