WEIGHTED APPROXIMATION ON SZASZ—TYPE OPERATORS

In this paper, we use weighted modules ω(?)(f,t)w to study the pointwise approximation on Szasz-type operators, and obtain the direct and converse theorem, as well as characterizations of the pointwise approximation of Jacobi-weighted Szasz-type operators.     

非交换陈特征的一个注记

此注记利用Moscovici的一个想法和热核渐近展开技术,给出了Clifford模 上Dirac算子的整循环陈特征的一个计算公式.     

Coding the principal character formula for affine Kac-Moody lie algebras

In this paper, an algorithm for computing the principal character for affine Lie algebras is discussed and presented. The principal characters discovered using this program are given and/or proven. Results include level 2 and 3 character formulas in and the sole existence of the Rogers-Ramanujan products in , , , , , , .     

Factorization of the (relative) Chern character through Lie algebra homology

Karoubi's relative Chern character is constructed as a chain map factoring through Lie algebra chains.This is part of the author's doctoral thesis, Stanford University 1990.     

铜-康铜热电偶的低温不均匀性实验研究

从冰点到液氮温度的宽低温区内,对随机选取的铜-康铜热电偶进行了重复性精度标定.测试结果表明,多次断偶重复焊接行为将产生约0.272 mV的标准差.这意味着在液氮条件下,温度测量过程的最大误差将达8.98 ℃.所以,对现场、尤其对深冷区的现场进行精确测温实验中出现的断偶故障,重新焊接后必须重新标定才能继续使用.     

Sensitivity analysis of truss structures and its application to the fully stressed design

Based upon the theorems of structural variations this paper derives a set of expressions for calculating partial derivatives of internal forces, stresses and joint displacements with respect to bar areas for truss structures. Compared with the known formulas for finding the gradients of structural behaviours the calculation effort with the proposed expressions in this paper is usually smaller because the additional virtual loadings needed are relatively fewer. It is of practical significance to various optimization methods in which the calculation of gradients of behaviours is widely used. Moreover, applying the derived formulas to the fully stressed design (FSD), we obtain an improved iterative method for FSD. The numerical examples show that the new method considerably reduces the reanalysis number required to converge to an FSD in comparison with the simple stress ratio method.     

HL-2M 装置宽谱段光谱诊断系统研制

HL-2M 装置宽谱段光谱诊断系统由采集光学、石英光纤和集成式光栅光谱仪构成,工作波段为 300~1100nm,可实现对工作气体(氢及其同位素)和内在杂质(碳、铁、氧等)线辐射的同步监测。通过将 5 台紧凑 型光谱仪并联形成集成式光栅光谱仪,可在保证宽谱段覆盖的同时实现较好的光谱分辨(0.04~0.19nm⋅pixel⁻¹)。目 前系统具有一个空间通道,最优时间分辨为 1.05ms,常规采样时间为 20ms。在 HL-2M 装置初始等离子体放电 实验期间,利用该套系统识别出氢等离子体的主要杂质为碳和氧,并对不同粒子的辐射特性进行了初步分析。     

基于IERT的非线性全光谱复杂水体定量分析算法研究

水是一种有限的资源,对农业、工业乃至人类的生存都是必不可少的,良好的水环境是可持续发展的重要保障。对水质信息的科学监测,是实现水资源优化配置与高效利用的基础。联合国环境署（UNEP）与世界卫生组织（WHO）指出,应当加强发展中国家的水质监测网络,包括数据质量的保证和分析能力的提高。光谱法作为一种新兴的水质分析方法,相比传统的化学水质监测方法,具有“响应速度快、多参数同步、绿色无污染”的特点。传统单波长、多波长的线性模型依赖于水体对特定波长的吸收特征,不适用于多组分混合溶液且普适性较差。因此,提出了一种基于IERT的非线性全光谱定量分析算法,建立适用于多组分混合溶液浓度预测模型,达到利用全光谱信息来预测浓度信息的目的。利用实验室配置的COD,BOD₅和TOC多组分混合溶液与NO₃-N、浊度、色度多组分混合溶液作为实验样本,使用光谱仪采集样本的光谱曲线,通过全光谱数据进行浓度预测实验,结果显示,对于COD,BOD₅和TOC多组分混合溶液,本算法对于三种组分的决定系数（R2）分别为0.999 3,0.991 4和0.999 3,均方根误差（RMSE）分别为0.024 4,0.057 7和0.000 4;对于NO₃-N、浊度、色度多组分混合溶液,决定系数（R2）分别为0.983 4,0.868 4和0.981 0,均方根误差（RMSE）分别为0.100 5,0.326 4和0.120 2。通过对比本算法与偏最小二乘（PLS）、支持向量机回归（SVR）、决策树（DT）、极端随机树（ERT）对于同一组数据的实验结果,表明：在两组多组分混合溶液的实验中,本算法对于其中各组分的决定系数（R2）均为最优,相比于其他对比算法均方根误差（RMSE）均有大幅减少。本算法可利用光谱信息对多组分混合溶液进行定量分析,在计算时间相当的情况下,可有效的提高浓度预测精度,减少定量分析的均方根误差,可为光谱法水质监测提供一种新的有效途径。     

The number of ideals in a quadratic field

LetK be a quadratic Geld, and letR(N) be the number of integer ideals inK with norm at most AT. Letx with conductork be the quadratic character associated withK. Then |R(N)−NL(1,x)|⩽Bk ^50/73 N ^23/73(logN)^461/146 forN ≥Ak, whereA andB are constants. ForN ≥Ak ^c,C sufficiently large, the factork ^50/73 may be replaced by (d(k))^4/73 k ^46/73. Dedicated to the memory of Professor K G Ramanathan