多孔活性自燃金属的光谱辐射特性研究

多孔活性金属材料因为内部存在大量的孔隙，大大地增加了与空气的接触面积，使得其在空气中的燃烧较为猛烈，燃烧温度迅速上升。其燃烧过程属于固体燃烧的范畴，较为复杂。以镁为例，通过建立燃烧模型，来研究多孔活性金属的光谱辐射特性。首先，建立氧气总消耗量与活性金属剩余质量的关系，研究氧气在活性金属孔隙内的扩散浓度关系，通过求解活性金属热平衡方程得到活性金属燃烧过程中温度与时间的关系式，进而得到活性金属的峰值光谱辐射强度表达式；然后，将模型计算的仿真结果与红外热像仪测得的实验结果对比，结果表明，模型的计算结果与实验结果相一致，误差在了10%以内；最后，通过建立的燃烧模型来研究活性金属燃烧规律以及其光谱辐射特性，解决了高空、高速下的活性金属光谱辐射强度难以实验获得的问题，大大减小了实验成本与时间。分别对比不同时间活性金属箔片在1～3，3～5以及8～12 μm波段下的辐射强度，得出活性金属燃烧时的辐射强度主要集中在3～5 μm波段的结论。研究结果表明：自燃金属最大燃烧温度随高度的增加逐渐下降，随气流速度的增加先增加后减小，在速度为30 m·s-1时，温度达到最大；自燃金属的光谱辐射强度在2～6 μm波段达到最大。该模型也可以用来研究其他活性金属的燃烧特性。     

The structure factor for liquid lead

Abstract

The structure factor for liquid lead at the temperatures 613 K, 643 K, 863 K and 1163 K are measured by neutron diffraction. Extensive comparisons to earlier measurements are made as well as comparisons to different hard-core models.     

Spectrum of a Rudin–Shapiro-like sequence

We show that a recently proposed Rudin–Shapiro-like sequence, with balanced weights, has purely singular continuous diffraction spectrum, in contrast to the well-known Rudin–Shapiro sequence whose diffraction is absolutely continuous. This answers a question that had been raised about this new sequence.     

Delayed stability switches in singularly perturbed predator–prey models

In this paper we provide an elementary proof of the existence of canard solutions for a class of singularly perturbed planar systems in which there occurs a transcritical bifurcation of the quasi steady states. The proof uses the one-dimensional result proved by V.F. Butuzov, N.N. Nefedov and K.R. Schneider, and an appropriate monotonicity assumption on the vector field. The result is applied to identify all possible predator–prey models with quadratic vector fields allowing for the existence of canard solutions.     

Side-lobeless far-field spectrum of a short pulse from a circular aperture with Gaussian form of transmittance

The spectrum change of a Gaussian pulse in the far field is studied with the Fresnel diffraction integral when it is incident on an aperture with Gaussian form transmittance. It is found that the side-lobes of the diffracted spectral intensity, which exist in a normal circular aperture with unit transmittance, can be eliminated completely under such a condition. Also, the red shift and blue shift of the spectral intensity maximum of the incident pulse are presented.     

SPECTRAL CHARACTERISTICS OF FREE AND LINKED PYRENE-TYPE CHROMOPHORES IN SOLUTION,POLYMER MATRICES,AND INTERPENETRATING NETWORKS

Monomers, 1-pyrenylmethyl methacrylate (PyMMA), 1-pyrenylbutyl methacrylate (PyBMA), 4-(1-pyrenyl)methoxymethyl styrene (PyMMS) and allyl-(1-pyrenylmehtyl) ether (PyMAE), with pyrene as chromophore, were prepared. Their spectral properties (absorption, emission and emission decay) in solution, and doped or bonded in polymer matrices and complex polymer systems as interpenetrating polymer networks (IPN), were investigated. Spectral properties of pyrene-containing monomers doped in polystyrene (PS), polymethylmethacrylate (PMMA), polyvinylchloride (PVC), polyethylene (PE) and grafted on PE as well as copolymerized in buthylmethacrylate-co-styrene copolymer (BMA-co-S) have been compared. Absorption and emission spectra of pyrene type probes in solution and in IPN matrices exhibit typical absorption of the pyrene moiety. For IPN with grafted probes on PE, the absorption is slightly shifted to red wavelength. For monomers, PyMMA, PyBMA and PyMAE grafted to PE, the shape of the emission spectrum depends on the wavelength of excitation. The ratio of intensity of the vibrational band, I₁/I₃, (I₁ peak at 377 nm and I₃ peak at 388 nm) has been a quite useful indicator of polarity of IPN. The relative quantum yields of fluorescence in IPN matrices are lower in comparison to polymer matrices of PE, PS, PMMA for all probes under study. The fluorescence life-times for bound and free probes have been in the range 100–200 ns, which is substiantialy shorter than for the parent pyrene chromophore under the same or similar condition. Grafted probes on PE alone, or as a part of IPN, exhibit substantially shorter life-time around 10 ns and decay is rather complex.     

Electron Spin Resonance Study on Grafting of Tetrafluoroethylene onto Polyethylene

An ESR study has been made on the course of grafting of tetrafluoroethylene onto polyethylene. Alkyl and allyl radicals trapped in the polymers were measured under various grafting conditions. It was observed that alkyl radicals decay very rapidly when monomers are in contact with the irradiated polymer, while allyl radicals decay very slowly even in the presence of monomers as in the decay of radicals in irradiated polymers without monomers. The effect of pre-irradiation temperature on grafting was also studied, and the rate of grafting was found to be much faster for lower pre-irradiation temperatures. From these experimental results it was concluded that alkyl radicals play an important Tole in the initiation reaction of grafting.     

Helical Biphenyl Bisazo Polyurethane: Preparation,Characterization and Analysis of Polymeric Thermo-Optic Switch

The bisazo chromophore molecule (CAAPM) and helical biphenyl bisazo polyurethane (HBBPU) were synthesized. The structures of CAAPM and HBBPU were characterized by FT-IR and UV-vis spectroscopic techniques. The measurements of refractive index and thermo-optic coefficient (dn/dT) of HBBPU were demonstrated at different wavelengths and different temperatures by the ATR technique. By using CCD digital imaging devices, transmission loss of the internal waveguide was measured. The refractive index dispersions and Sellmeyer coefficients of HBBPU were obtained by the Sellmeyer equation. A Y-branched switch based on the thermo-optic effect was proposed and the performance of the switch was simulated. With a branching angle of 0.143° and the FD-BPM method, the result showed that the power consumption of the thermo-optic switch could be only 3.6 mW, and the response time of the switch could reach about 8 ms. This is a significant improvement in reducing power consumption compared with the normal Y-branched polymer thermo-optic switch.     

基于单片机和光电开关的通用计数器设计

At presrent, the photoelectric switch is more and more widely used in the industrial automation equipment.It can be finished counting industrial products by using the characteristic of the photoelectric switch which can detect the objects without touching them. This design uses the modular design method,including power-supply module, The photoelectric conversion module, optocoupler isolation circuit module, power off protection module, matrix keyboard module, counting module and The display module. It mainly uses 51 single-chip microcomputer to control the system,uses the keilC51 software to design program,uses the Proteus software to complete the simulation. Through the experiment, it proves the design is feasible.