A Micromechanics Study of Lamellar TiAl

Microdeformation patterns of lamellar TiAl specimens with various grain sizes under uniaxial tension are mapped using the micro/nano experimental mechanics technique called SIEM (Speckle Interferometry w ith Electron Microscopy). The stress–strain relationships were obtained from deformations within decreasing areas ranging from mm² to μm². We found that the stress–strain relationship of the material depends on the size of strain measuring area in relation to the grain size. The stiffness at a grain boundary can be as large as 7–10 times more than that of the grain itself. From the data obtained so far, it seems that the traditional way of using PST (polysynthetically twinned) single crystal to predict polycrystalline behavior may not be appropriate.     

Effects of red blood cell aggregates dissociation on the estimation of ultrasound speckle image velocimetry

Ultrasound speckle image of blood is mainly attributed by red blood cells (RBCs) which tend to form RBC aggregates. RBC aggregates are separated into individual cells when the shear force is over a certain value. The dissociation of RBC aggregates has an influence on the performance of ultrasound speckle image velocimetry (SIV) technique in which a cross-correlation algorithm is applied to the speckle images to get the velocity field information. The present study aims to investigate the effect of the dissociation of RBC aggregates on the estimation quality of SIV technique. Ultrasound B-mode images were captured from the porcine blood circulating in a mock-up flow loop with varying flow rate. To verify the measurement performance of SIV technique, the centerline velocity measured by the SIV technique was compared with that measured by Doppler spectrograms. The dissociation of RBC aggregates was estimated by using decorrelation of speckle patterns in which the subsequent window was shifted as much as the speckle displacement to compensate decorrelation caused by in-plane loss of speckle patterns. The decorrelation of speckles is considerably increased according to shear rate. Its variations are different along the radial direction. Because the dissociation of RBC aggregates changes ultrasound speckles, the estimation quality of SIV technique is significantly correlated with the decorrelation of speckles. This degradation of measurement quality may be improved by increasing the data acquisition rate. This study would be useful for simultaneous measurement of hemodynamic and hemorheological information of blood flows using only speckle images.     

微型激光光学引擎中光学噪音的抑制

分析了微型激光投影引擎的两种主要光学噪音|干涉网格和激光散斑产生的基理|提出采用振动的随机位相板同时实现干涉网格和激光散斑抑制的方法并进行了理论分析|自行设计了微型激光投影引擎,利用微型电控马达带动随机位相板振动,用CCD相机在不同的F#及曝光时间下对投影图像进行了采集,并对图像的散斑对比度行了测试.结果表明,通过静止的随机位相板可以很好地抑制干涉网格噪音|通过使随机位相板以大于视觉暂留效应形成的融合频率进行振动,可以同时抑制干涉网格和激光散斑,使得散斑对比度小于5%,达到投影观察的要求.     

利用振动光纤减弱激光散斑的研究

在激光投影显示技术中,引入振动光纤的方法能够以较小的能量损失减弱激光散斑.本文利用广义范西特-泽尼克定理对激光投影显示中采用振动光纤抑制散斑做了理论分析.结果表明,散斑衬比度的大小取决于光纤的模式数和投影系统的光瞳大小,对于相同大小的像面,收集更多的光纤模式数和增大孔径均可减弱散斑衬比度.用两种不同的多模光纤所做的对比实验定性证实了这一结论.研究结果对光纤的选择和投影系统的设计有一定的指导意义.     

基于散斑成像技术的扩展目标高分辨率复原

大气湍流对实现扩展目标的高分辨率重建具有重要影响.针对此问题,本文提出了一种改进的散斑成像算法.传统散斑成像算法在相位恢复计算中存在双谱数据量大和计算复杂等问题,改进算法利用图像的厄米特对称性和查找表技术将相位恢复和双谱计算紧密结合,通过计算截止频率内的每个空间频率点邻域双谱和添加双谱坐标约束使得双谱数据量减小.建立傅里叶频域相邻两象限共用的坐标查找表,确定双谱和相位恢复计算顺序,避免了双谱的对称操作从而使得整个计算简单易行.仿真实验结果表明:改进算法相对于双谱截切法使得双谱数据量至少减少了24%并准确恢复出目标相位谱,恢复相位谱经过傅里叶逆变换后清晰地显示了目标的轮廓和结构,再结合Labeyrie-Kroff法得到了目标的高分辨率图像;最后对实际天文图像进行处理,使恢复后图像的分辨率相对于原始图像得到明显提高,并且改进算法以更少的计算时间获得了与双谱截切法几乎同样的恢复效果.     

Phase retrieval in two-wavelength DSSI using a combined filtering method

Phase retrieval in two-wavelength DSSI (digital speckle shearing interferometry) using a combined filtering method is proposed for small deformation derivative measurement. A simultaneous two-wavelength illumination and 3-CCD camera are employed in the experimental setup. The proposed method, which uses a two-wavelength technique does not require the conventional spatial phase unwrapping and has the advantage of good noise suppression for phase retrieval. Experimental results obtained show that using the proposed combined filtering method sensitivity similar to the single wavelength technique can be achieved.     

象平面散斑场相位差的统计性质

运用弱散射体产生的部分显现散斑场相位差自由标准偏差的近似表达式,计算和分析了由单会聚透镜成象产生的象平面部分显现高斯散斑场相位差的自由统计性质.     

The gated integration technique for the accurate measurement of the autocorrelation function of speckle intensities scattered from random phase screens

A new approach based on the gated integration technique is proposed for the accurate measurement of the autocorrelation function of speckle intensities scattered from a random phase screen. The Boxcar used for this technique in the acquisition of the speckle intensity data integrates the photoelectric signal during its sampling gate open, and it repeats the sampling by a preset number, m. The average analog of the m samplings output by the Boxcar enhances the signal-to-noise ratio by , because the repeated sampling and the average make the useful speckle signals stable, while the randomly varied photoelectric noise is suppressed by . In the experiment, we use an analog-to-digital converter module to synchronize all the actions such as the stepped movement of the phase screen, the repeated sampling, the readout of the averaged output of the Boxcar, etc. The experimental results show that speckle signals are better recovered from contaminated signals, and the autocorrelation function with the secondary maximum is obtained, indicating that the accuracy of the measurement of the autocorrelation function is greatly improved by the gated integration technique.     

激光散斑时间漂移效应研究

报道了激光散斑时间漂移效应.引入了散斑模型,接收面上散斑场复振幅的强度和位相的统计性质证明了模型的合理性.基于此模型和相关算法,模拟了所有可能导致激光散斑时间漂移效应的物理因素的影响.模拟结果显示两个因素起主要作用.通过巧妙地改变VCSEL和CCD的工作状态,也证明了两个因素其主要作用,即激光器对表面的加热引起的表面膨胀和CCD的热效应带来的噪声增加.相比之下,其他因素仅仅会带来散斑图像的微小变化.     

Assessment of speckle-pattern quality in digital image correlation based on gray intensity and speckle morphology

In digital image correlation (DIC), speckle patterns are generated on the surface of a specimen to resolve uniqueness issues. Thus, speckle patterns significantly affect the accuracy of image correlation. To assess the quality of speckle patterns, the standard deviation of gray intensities within each speckle (SDGIS) is introduced as a new metric. On the basis of the cumulative distribution of SDGIS, speckle-pattern quality measurement (ρ) is proposed, which integrates the features of gray intensity and speckle morphology. Twelve speckle patterns are generated by changing the spraying time and nozzle sizes of an airbrush because these are associated with the speckle volume fraction and speckle size, respectively. In addition, three displacement fields are used to investigate the effects of speckle patterns on the accuracy of the DIC results. For the 12 speckle images associated with the three displacement fields, the correlation results demonstrate that the proposed speckle-pattern quality measurement is inversely proportional to the averaged error of the subset method. This is statistically confirmed by evaluating the correlation coefficient and p-value. Furthermore, the error of the subset method is more affected by speckle patterns than the subset size when the subset size is sufficiently large.