Pivotal role of ballistic and quasi-ballistic electrons on LED efficiency

Significant progress in the power conversion efficiency and brightness of InGaN-based light emitting diodes (LEDs) has paved the way for these devices to be considered for LED lighting. In this realm, however, the efficiency must be retained at high injection levels in order to generate the lumens required. Unfortunately, LEDs undergo a monotonic efficiency degradation starting at current densities even lower than 50 A/cm² which would hinder LED insertion into the general lighting market. The physical origins for the loss of efficiency retention are at present a topic of intense debate given its enormous implications. This paper reviews the current status of the field regarding the mechanisms that have been put forward as being responsible for the loss of efficiency, such as Auger recombination, electron overflow (spillover), current crowding, asymmetric injection of electrons and holes, and poor transport of holes through the active region, the last one being applicable to multiple quantum well designs. While the Auger recombination received early attention, increasing number of researchers seem to think otherwise at the moment in that it alone (if any) cannot explain the progressively worsening loss of efficiency reduction as the InN mole fraction is increased. Increasing number of reports seems to suggest that the electron overflow is one of the major causes of efficiency degradation. The physical driving force for this is likely to be the relatively poor hole concentration and transport, and skewed injection favoring electrons owing to their relatively high concentration. Most intriguingly there is recent experimental convincing evidence to suggest that quasi-ballistic electrons in the active region, which are not able to thermalize within the residence time and possibly longitudinal optical phonon lifetime, contribute to the carrier overflow which would require an entirely new thought process in the realm of LEDs.     

Stability in Debye series calculation for light scattering by absorbing particles and bubbles

The Debye-series decomposition is of importance for understanding of light scattering features and for the validity of the geometrical optics approximation to light scattering. The numerical stability and accuracy for calculating light scattering with Debye series is studied and an improved algorithm is proposed in this work. The ratios of the Riccati-Bessel functions and the logarithmic derivatives of the Riccati-Bessel functions are employed and calculated with proper recurrences. Exemplifying results are provided to show the improvement of the algorithm.     

一种基于空间一致性降元的高光谱图像非监督分类

为了提高分类精度和边缘辨识性,该文引入图像空间一致性降元(pixels reduction with spatial coherence property, PRSCP)及线性回归分析,提出了一种基于空间一致性降元的非监督分类。该方法从像元光谱相似性出发,利用像元最小关联窗口合并相邻相似像元为像块完成降元。使用线性关系建模像块内像元的光谱向量,并利用F检验判断像块数据的线性显著性。利用一元线性回归(one dimensional linear regression, ODLR)估计出像块的基准向量,根据基准向量合并相似(同类)像块完成分类。利用AVIRIS数据评估了该方法性能,实验结果表明：与K-MEANS和ISODATA方法相比,该方法精度高、边缘辨识度好及鲁棒性强。     

Visible-Light-Induced Control over Reversible Single-Chain Nanoparticle Folding

We introduce a class of single-chain nanoparticles (SCNPs) that respond to visible light (λ_max=415 nm) with complete unfolding from their compact structure into linear chain analogues. The initial folding is achieved by a simple esterification reaction of the polymer backbone constituted of acrylic acid and polyethylene glycol carrying monomer units, introducing bimane moieties, which allow for the photochemical unfolding, reversing the ester-bond formation. The compaction and the light driven unfolding proceed cleanly and are readily followed by size exclusion chromatography (SEC) and diffusion ordered NMR spectroscopy (DOSY), monitoring the change in the hydrodynamic radius (R_H). Importantly, the folding reaction and the light-induced unfolding are reversible, supported by the high conversion of the photo cleavage. As the unfolding reaction occurs in aqueous systems, the system holds promise for controlling the unfolding of SCNPs in biological environments.     

CE with sequential light-emitting diode-induced fluorescence and electro-chemiluminescence detections for the determination of amino acids and alkaloids

This paper describes the determination of alkaloids and amino acids (AAs) using CE in conjunction with sequential light-emitting diode-induced fluorescence (LEDIF) and electrochemiluminescence (ECL) detections. In the CE-LEDIF-ECL system, the ECL detector was located in the outlet of the capillary, while the LEDIF detector was positioned 12 cm from the outlet. Naphthalene-2,3-dicarboxaldehyde (NDA) was used to form fluorescent AA-NDA derivatives from AAs possessing primary amino groups, while Ru(bpy)(3) (2+) was used to obtain ECL signals for analytes having secondary and tertiary amino groups. In the presence of poly(ethylene oxide), we accomplished the CE-LEDIF-ECL separation of a mixture of 12 AA-NDA derivatives, anabasine, nicotine, and proline within 11 min. This low-cost CE-LEDIF-ECL system allows the analysis of these AA-NDA derivatives and alkaloids at concentrations in the ranges of 49 nM-0.2 microM and 0.66-4.7 microM, respectively. We applied our CE-LEDIF-ECL system to the analysis of a urine sample and also to tobacco extracts. We obtained good qualitative and quantitative results when using this method with these analytes: the RSDs were below 3.0 and 2.8%, respectively. This CE-LEDIF-ECL system provides the advantages of high efficiency, speed, and sensitivity for the analysis of analytes possessing amino groups.     

Fluorenyl dendrimer porphyrins: synthesis and photophysical properties

New symmetrical dendrimeric type super-porphyrin bearing sixteen fluorenyl donor groups sixteen fluorenylporphyrin SOFP (1) have been synthesized and characterized. Preliminary photophysical properties are reported; in comparison to the references first generation dendrimer tetrafluorenylporphyrin TOFP (2) bearing four peripheral fluorenyl and second generation dendrimer octafluorenylporphyrin OOFP (3) bearing eight peripheral fluorenyl, the luminescence properties are slightly improved. It is found that the excitation energy transfer occurs from the sixteen fluorenyl units to the porphyrin core, following what the porphyrin emits intense red light.     

Characterization of proteins separated by displacement chromatography using low angle laser light scattering photometry

Summary -Lactoglobulin A and B (-LACT) were separated by displacement chromatography (DSC) on an ionexchange column using dextran sulfate as the displacer. A LALLS photometer and a UV detector, in series, were used to determine the molecular weight (MW) of the proteins, on-line. The results indicate that both, -LACT A and B, were present as dimers in the buffer used for the mobile phase. The MWs of the proteins were about 6–8% higher than the theoretical MW of a dimer (37,000). Additional control studies have shown the presence of a high molecular weight species in both the proteins, which could possibly be an aggregate. This species was observed in the LALLS signal but was nearly absent in the UV signal. Our work has demonstrated the feasibility of interfacing LALLS with displacement chromatography for detecting impurities or aggregates which may be difficult to detect by conventional detectors used for chromatography.     

光散射技术在研究高分子溶液和凝胶方面的应用

从溶液中的高分子、凝胶粒子及微乳胶粒子形态结构的表征和凝胶化过程、微乳液聚合及大分子缔合等动态过程的跟踪等方面的研究综述了近十几年来光散射技术在高分子溶液和凝胶领域的应用,并简单介绍了光散射技术的基本原理、发展简史和仪器及使用方法。     

末端含C_(60)单链窄分子量分布高分子在溶液中的自组装行为

C60做为碳笼烯家族的代表,由于它独特的物理化学性能而引起人们广泛的兴趣[1].然而,它较差的溶解性和加工性能限制了其实际应用.将C60引入高分子可将C60不同寻常的物理化学性能与高分子良好的力学、溶解及加工性能结合起来的一种有效方法.自从大规模制备C60的方法出现后,已有大量关于合成各种高分子化C60的报道[2～6].通过化学修饰的方法将C60结合到高分子中的主要研究目是改进C60的溶解性及加工性能.