Estimation of DUR and source utilization efficiency for changing product dimensions and source activities in gamma irradiator

This paper discusses the application of the developed analytical method (Reji George, Jain, Pradhan, A.S., 2008. Theoretical evaluation of dose distribution in product in radiation processing plants. Radiat. Phys. Chem. 77, 186–191), for determining the activity loading pattern in a radiation processing plant to get the desired dose uniformity ratio (DUR) for processing mangoes and how the method was used to evaluate the expected source utilization efficiency for the redesigned source–product configuration.     

On the pfaffianized-KP equation with self-consistent sources

A new procedure called ‘source generation’ is applied to the pfaffianized KP equation. As a result, the pfaffianized-KP equation with self-consistent sources (ESCS) is obtained. This coupled system cannot only be reduced to the pfaffianized KP equation, but also reduced to the KP equation with self-consistent sources (KPESCS). So the pfaffianized-KP ESCS can be viewed as a pfaffian version of the KPESCS, which indicates the commutativity of the ‘source generation’ procedure and pfaffianization.     

First neutron Bragg-edge imaging experimental results at CSNS

The neutron Bragg-edge imaging is expected to be a new non-destructive energy-resolved neutron imaging technique for quantitatively two-dimensional or three-dimensional visualizing crystallographic information in a bulk material, which could be benefited from pulsed neutron source. Here we build a Bragg-edge imaging system on the General Purpose Powder Diffractometer at the China Spallation Neutron Source. The residual strain mapping of a bent Q235 ferrite steel sample has been achieved with a spectral resolution of 0.15% by the time-of-flight neutron Bragg-edge imaging on this system. The results show its great potential applications in materials science and engineering.     

Objective and subjective evaluations of the multi-channel auralization technique as applied to solo instruments

Auralizations are commonly used today by architectural acousticians as a tool to model acoustically sensitive spaces. This paper presents investigations employing an auralization methodology known as multi-channel auralizations, to determine the benefits of using an increasing number of channels in such auralizations. First an objective evaluation was conducted to examine how acoustic parameters, such as reverberation time, vary when using “quadrant” (one fourth of a spherical source) or “thirteenth” sources to create the binaural room impulse responses. Large differences in the values were found between the different sections of the sphere, on the order of several just noticeable differences. Two subjective studies were then pursued, first to determine if auralizations made with an increasing number of channels sound more realistic and have an increased perceived source size, using solo musical instruments of varying directivity indices as the sources. Overall, subjects perceived the auralizations made with an increasing number of channels as more realistic, whereas results for perceived source size are less clear. The second subjective study assessed the ease with which subjects could identify the source orientation from the auralizations as a function of number of channels. Results indicate that more channels made it easier for subjects to differentiate between source orientations.     

Refractive index imaging from radiative transfer equation-based reconstruction algorithm: Fundamentals

We present the first reconstruction algorithm for refractive index imaging, which is based on the radiative transfer equation (RTE). An objective function is iteratively minimized to find a solution to the problem of inversion of the refractive index field. The function describes the discrepancies of the emerging light measurements on the surface of the sample to be probed with predicted data from the corresponding numerical model. The unknown refractive index field is updated within each reconstruction iteration according to a search direction on the index distribution given by the adjoint model to the RTE. In this paper, emphasis is placed on the theoretical aspects. Preliminary tests are demonstrated on generic phantoms.     

Implementation and investigation of iterative solvers in the Discrete Sources Method

The implementation of iterative methods as solvers for the Discrete Sources Method (DSM) is presented. In this method, light scattering computation linear systems with dense and relative small matrices are generated. The linear systems are traditionally solved using the QR-decomposition method. For large particles or particles with extreme geometries even this commonly stable solver can fail. In these cases, we expect that iterative methods can provide a satisfying solution nevertheless.We will present our investigation in two consecutive papers. Here, we study four different iterative solvers (RGMRES, BiCGStab, BiCGStab(l), and MinRes) considering the performance and the accuracy for typical light scattering problems. Using these iterative methods we increased the quality of a solution, especially for oblate spheroids with a higher aspect ratio. Preconditioning technique is considered in the following paper.     

合肥光源托歇克效应损失电子的探测

 束流寿命是衡量储存环性能的重要参数,直接影响着光源的正常运行。对于合肥光源（HLS）,托歇克（Touschek）寿命是影响束流寿命的重要因素。为了研究Touschek寿命,需要探测由于Touschek效应所损失的电子。介绍了束流寿命的概念,说明了Touschek效应的原理和机制,利用蒙特卡罗软件EGSnrc模拟计算了丢失电子与真空壁的相互作用,通过塑料闪烁体探测器和光电倍增管获得了由于Touschek效应丢失的电子所产生的信号,然后将信号经过放大甄别和符合处理后,用计数器测量了计数率。结果表明：由于Touschek效应而成对丢失的电子的确存在,且电子损失率随流强的降低而减小。这为下一步储存环的能量标定工作做好了前期准备。     

3D ultrasound reconstruction algorithms from analog and digital data

Freehand 3D ultrasound is increasingly being introduced in the clinic for diagnostics and image-assisted interventions. Various algorithms exist for combining 2D images of regular ultrasound probes to 3D volumes, being either voxel-, pixel- or function-based. Previously, the most commonly used input to 3D ultrasound reconstruction has been digitized analog video. However, recent scanners that offer access to digital image frames exist, either as processed or unprocessed data. To our knowledge, no comparison has been performed to determine which data source gives the best reconstruction quality. In the present study we compared both reconstruction algorithms and data sources using novel comparison methods for detecting potential differences in image quality of the reconstructed volumes. The ultrasound scanner used in this study was the Sonix RP from Ultrasonix Medical Corp (Richmond, Canada), a scanner that allow third party access to unprocessed and processed digital data. The ultrasound probe used was the L14-5/38 linear probe. The assessment is based on a number of image criteria: detectability of wire targets, spatial resolution, detectability of small barely visible structures, subjective tissue image quality, and volume geometry. In addition we have also performed the more “traditional” comparison of reconstructed volumes by removing a percentage of the input data. By using these evaluation methods and data from the specific scanner, the results showed that the processed video performed better than the digital scan-line data, digital video being better than analog video. Furthermore, the results showed that the choice of video source was more important than the choice of tested reconstruction algorithms.     

Estimating Precision in Functional Images

Abstract

Functional imaging of biologic parameters like in vivo tissue metabolism is made possible by Positron Emission Tomography (PET). Many techniques have been suggested for extracting such images from dynamic time-course sequences of reconstructed PET scans. Quantitating the precision of these estimates is important for drawing inferences on the biologic parameters. Analytic variance formulas are not immediate owing to the nonlinear methods used in extraction. The usual resampling approach is infeasible because each image reconstruction in PET is a computationally demanding solution to a high-dimensional linear inverse problem. We suggest an alternative simulation approach that approximates the distribution of reconstructed PET scans and performs a parametric bootstrap in the imaging domain. Results on a simplified model chosen to match the characteristics of PET reconstruction are very encouraging. Mixture analysis is used to estimate functional images; however, the suggested approach is general enough to extend to other techniques or imaging methods.     

Reconstruction of n-dimensional convex bodies from surface tensors

In this paper, we derive uniqueness and stability results for surface tensors. Further, we develop two algorithms that reconstruct shape of n-dimensional convex bodies. One algorithm requires knowledge of a finite number of surface tensors, whereas the other algorithm is based on noisy measurements of a finite number of harmonic intrinsic volumes. The derived stability results ensure consistency of the two algorithms. Examples that illustrate the feasibility of the algorithms are presented.