Dielectric-Lined Multiwave Cerenkov Generators Producing High Power Millimeter Waves

This paper presents the concept of a Dielectric-lined Multiwave Cerenkov Generator(DMWCG) producing high power millimeter waves, which is investigated with a two and one half dimensional( ) electromagnetic relativistic Particle-in-Cell(PIC) simulation code. It is showed that the DMWCG can operate in a lower diode-voltage regime with much higher radiation efficiency as compared with the usual Multiwave Cerenkov Generator(MWCG). The simulation work indicates both the downshift of the wave frequency in the presence of the dielectric liner and the existence of the optima for the permittivity of the liner as well as for the magnitude of the guiding magnetic field. The required intensity of the guiding field is reduced with the introducing of the liner. The radiation is generated at the dominant frequency of 31.5GHz. The power level of 1.5GW is achieved, with radiation efficiency up to 15%. The features of parameter dependency are presented. And reasonable explanation is put forward. In addition, the enhanced propagation of the electron beam is studied in the presence of the dielectric liner.     

声腔对电动式换能器工作特性的影响

传统的电动式换能器设计理论中,未考虑压力补偿系统等声腔结构对声学性能的影响,声源级理论设计结果与实测结果存在较大差别。研究中将电动式换能器内部的三段气腔视为突变截面声腔结构,给出了声腔的四端网络等效电路,将其作为辐射面的负载添加到电动式换能器的传统等效电路中,获得了电动式换能器改进的等效电路。基于改进的等效电路求解了带有声腔结构的电动式换能器声源级曲线,该曲线与有限元仿真分析结果基本一致,验证了该改进的等效电路在预报电动式换能器声源级方面的正确性。基于该等效电路研究了声腔的结构尺寸、末端声学边界及腔内气体声学参数对声源级起伏特征的影响。结果显示,在声腔末端敷设吸声材料或在声腔内充入特性阻抗较小的气体对于抑制或消除声源级起伏具有明显作用。     

激光等离子体脉冲软X光标定源

 利用神光Ⅱ上激光与等离子体相互作用得到的软X光,建立了基于多层镜的四通道软X光单色器系统。研究了光源的性能,测量了光源强度、单色器系统稳定性、相应通道的一致性。研究表明,采用多层镜作为脉冲光源的分光元件,可以得到具有较好单色性的强脉冲软X 光标定源。光源的光子能量为253 eV和820 eV,两能道的光源强度分别为1.8×10¹⁹ photon/(s·cm²)和3.2×10¹⁹ photon/(s·cm²)。在该标定源上可以实现XRD、平面镜、多层镜、透射光栅和滤片的标定。     

光学扫描全息术中的孪生像噪音及消除

阐述了光学扫描全息术的基本原理,分析了孪生像噪音的来源,提出了一种新的数字滤波方法.计算机仿真结果表明:孪生像噪音以振荡形式传播,降低了重构图像的信噪比,影响了重构图像的分辨率;用电子复用技术,即用复全息图函数代替实全息图函数的方法可以有效地消除孪生像噪音;采用单一通道对信号进行处理,即只用一个实全息图函数,通过数字滤波方法同样可以消除孪生像噪音,该方法简便、实用而有效.     

合肥光源托歇克效应损失电子的探测

 束流寿命是衡量储存环性能的重要参数,直接影响着光源的正常运行。对于合肥光源（HLS）,托歇克（Touschek）寿命是影响束流寿命的重要因素。为了研究Touschek寿命,需要探测由于Touschek效应所损失的电子。介绍了束流寿命的概念,说明了Touschek效应的原理和机制,利用蒙特卡罗软件EGSnrc模拟计算了丢失电子与真空壁的相互作用,通过塑料闪烁体探测器和光电倍增管获得了由于Touschek效应丢失的电子所产生的信号,然后将信号经过放大甄别和符合处理后,用计数器测量了计数率。结果表明：由于Touschek效应而成对丢失的电子的确存在,且电子损失率随流强的降低而减小。这为下一步储存环的能量标定工作做好了前期准备。     

Objective and subjective evaluations of the multi-channel auralization technique as applied to solo instruments

Auralizations are commonly used today by architectural acousticians as a tool to model acoustically sensitive spaces. This paper presents investigations employing an auralization methodology known as multi-channel auralizations, to determine the benefits of using an increasing number of channels in such auralizations. First an objective evaluation was conducted to examine how acoustic parameters, such as reverberation time, vary when using “quadrant” (one fourth of a spherical source) or “thirteenth” sources to create the binaural room impulse responses. Large differences in the values were found between the different sections of the sphere, on the order of several just noticeable differences. Two subjective studies were then pursued, first to determine if auralizations made with an increasing number of channels sound more realistic and have an increased perceived source size, using solo musical instruments of varying directivity indices as the sources. Overall, subjects perceived the auralizations made with an increasing number of channels as more realistic, whereas results for perceived source size are less clear. The second subjective study assessed the ease with which subjects could identify the source orientation from the auralizations as a function of number of channels. Results indicate that more channels made it easier for subjects to differentiate between source orientations.     

Implementation and investigation of iterative solvers in the Discrete Sources Method

The implementation of iterative methods as solvers for the Discrete Sources Method (DSM) is presented. In this method, light scattering computation linear systems with dense and relative small matrices are generated. The linear systems are traditionally solved using the QR-decomposition method. For large particles or particles with extreme geometries even this commonly stable solver can fail. In these cases, we expect that iterative methods can provide a satisfying solution nevertheless.We will present our investigation in two consecutive papers. Here, we study four different iterative solvers (RGMRES, BiCGStab, BiCGStab(l), and MinRes) considering the performance and the accuracy for typical light scattering problems. Using these iterative methods we increased the quality of a solution, especially for oblate spheroids with a higher aspect ratio. Preconditioning technique is considered in the following paper.     

Controlled Space Radiation concept for mesh-free semi-analytical technique to model wave fields in complex geometries

Numerical modelling of the ultrasonic wave propagation is important for Structural Heath Monitoring and System Prognosis problems. In order to develop intelligent and adaptive structures with embedded damage detector and classifier mechanisms, detailed understanding of scattered wave fields due to anomaly in the structure is inevitably required. A detailed understanding of the problem demands a good modelling of the wave propagation in the problem geometry in virtual form. Therefore, efficient analytical, semi-analytical or numerical modelling techniques are required. In recent years a semi-analytical mesh-free technique called Distributed Point Source Method (DPSM) is being used for modelling various ultrasonic, electrostatic and electromagnetic wave field problems. In the conventional DPSM approach point sources are placed along the transducer faces, problem boundaries and interfaces to model incident and scattered fields. Every point source emits energy in all directions uniformly. Source strengths of these 360° radiation sources are obtained by satisfying interface and boundary conditions of the problem. In conventional DPSM modelling approach it is assumed that the shadow zone does not require any special consideration. 360° Radiation point sources should be capable of properly modelling shadow zones because all boundary and interface conditions are satisfied. In this paper it is investigated how good this assumption is by introducing the ‘shadow zone’ concept at the point source level and comparing the results generated by the conventional DPSM and by this modified approach where the conventional 360° radiation point sources are replaced by the Controlled Space Radiation (CSR) sources.     

蒙特卡罗方法在X光源尺寸测量中的应用

 利用蒙特卡罗方法对两种X光源尺寸测量方法狭缝法和刃边法进行了模拟,比较了在不同实验布局条件下的模拟结果,指出X射线的强穿透性对成像具有较大的影响,使狭缝像的底部展宽,影响对光源特性的判断,同时使刃边法的测量精度在一定程度上受对中精度的制约。为减小其影响,在保证不降低图像接收范围、图像对比度以及测量精度的基础上,设计了新的狭缝法实验测量布局,同时建议用ROLLBAR法代替刃边法进行测量。     

空气洁净度对点源透射比测试准确度的影响

为了进一步提高点源透射比测试准确度,明确点源透射比测试环境需求,提出了一种定量分析空气洁净度对点源透射比测试准确度影响的方法.该方法以Mie散射理论为基础,采用蒙特卡洛模拟方法,对空气中尘埃的尺寸和数量进行随机模拟,得到不同空气洁净度等级下空气中尘埃对点源透射比测试准确度的影响.以直径为800mm、点源透射比设计值为10-9量级的某太空望远镜为例进行定量分析,结果表明:为了满足该空间光学系统的点源透射比测试需求,空气洁净度等级应优于ISO class 6,此时空气中尘埃引起的点源透射比测试误差约为10-10量级;ISO class每升高一级,测试误差约增大10倍.