A regularised boundary element formulation for contactless SAR evaluations within homogeneous and inhomogeneous head phantoms

This work presents a Boundary Element Method (BEM) formulation for contactless electromagnetic field assessments. The new scheme is based on a regularised BEM approach that requires the use of electric measurements only. The regularisation is obtained by leveraging on an extension of Calderón techniques to rectangular systems leading to well-conditioned problems independent of the discretisation density. This enables the use of highly discretized Huygens surfaces that can be consequently placed very near to the radiating source. In addition, the new regularised scheme is hybridised with both surfacic homogeneous and volumetric inhomogeneous forward BEM solvers accelerated with fast matrix–vector multiplication schemes. This allows for rapid and effective dosimetric assessments and permits the use of inhomogeneous and realistic head phantoms. Numerical results corroborate the theory and confirms the practical effectiveness of all newly proposed formulations.     

Comparison of cadmium manganese telluride crystals grown by traveling heater method and vertical Bridgman method

In this paper, the CdMnTe crystals were grown by the Travelling Heater Method (THM) and the Vertical Bridgman (VB) method, respectively. The crystal properties, including the Mn axial distribution, impurity concentrations, resistivity, Hall effects and energy response spectra, were characterized and compared. The results shown that the CdMnTe crystal grown by the THM had more uniform Mn distribution and lower impurity concentrations compared to the crystal grown by VB method. The resistivity of CdMnTe grown by THM was (1.5 ∼ 8) × 10¹⁰ Ω.cm, while the resistivity of CdMnTe grown by VB was 10⁷∼10⁸ Ω.cm. The In dopant distributed uniformly throughout the crystal ingot grown by THM with the doping concentration of 0.6–0.7 ppm, while the In dopant concentration throughout the crystal grown by VB method is in the range of 1.31–2.4 ppm. Hall measurements revealed that the conductivity of the THM grown crystal was weak n‐type conductivity and the VB grown crystal was p‐type conductivity. A planar CdMnTe detector from the THM grown crystal showed a resolution of 8% of the ²⁴¹Am radiation at 59.5 keV peak, however, no energy response was revealed with the CdMnTe detector by the VB method. The results demonstrate that CdMnTe crystal grown by THM have better crystal quality and detector properties compared to that by VB method.     

Phenol Solvothermal Synthesis of JBW-Type Zeolites

Phenol was used as an aromatic and acidic solvent in solvothermal synthesis.JBW-type zeolites were successfully synthesized in a phenolic system.The as-synthesized microporous crystals were characterized by powder X-ray diffraction analysis and scanning electron microscopy techniques.The results indicate that phenol is a good organic solvent and has a huge potential of application in studying crystallization mechanism and synthesizing novel microporous materials.     

自旋因式化法推求同科电子组态原子光谱项

以同科电子i3组态光谱项推求为例,提出了用自旋因式化方法推求同科电子光谱项的一般方法.该法较为简单、适用,易于推广,可求出任一基态或激发态原子或离子光谱项.     

浅析波谱分析课程教学改革

根据在波谱分析课程教学中遇到的一些实际问题,本文探讨了便于波谱分析课程教学的几种方法,并收到了较好的教学效果.     

QUADRATURE METHODS FOR HIGHLY OSCILLATORY SINGULAR INTEGRALS

We address the evaluation of highly oscillatory integrals,with power-law and logarithmic singularities.Such problems arise in numerical methods in engineering.Notably,the evaluation of oscillatory integrals dominates the run-time for wave-enriched boundary integral formulations for wave scattering,and many of these exhibit singularities.We show that the asymptotic behaviour of the integral depends on the integrand and its derivatives at the singular point of the integrand,the stationary points and the endpoints of the integral.A truncated asymptotic expansion achieves an error that decays faster for increasing frequency.Based on the asymptotic analysis,a Filon-type method is constructed to approximate the integral.Unlike an asymptotic expansion,the Filon method achieves high accuracy for both small and large frequency.Complex-valued quadrature involves interpolation at the zeros of polynomials orthogonal to a complex weight function.Numerical results indicate that the complex-valued Gaussian quadrature achieves the highest accuracy when the three methods are compared.However,while it achieves higher accuracy for the same number of function evaluations,it requires signi cant additional cost of computation of orthogonal polynomials and their zeros.     

Lamb波频域逆散射全聚焦成像方法研究

Lamb波因其传播距离远、衰减小常被用于板状结构的无损检测中,在基于Lamb波损伤检测的诸多成像技术中,全聚焦方法(Total Focus Method,TFM)方法因其成像分辨率高、信噪比高而受青睐.然而Lamb波的频散效应导致时域延时量不能被准确计算,进而影响传统TFM方法对损伤定位及成像的精度;此外,既有的TFM...     

对固体圆二色光谱测试方法的再认识——兼谈“浓度效应”

对近期发展的固体圆二色(CD)光谱测试方法进行了概述、评价和比较, 着重探讨了“浓度效应”的存在使固体CD光谱失真的原因. 通过对本课题组和其他作者已报道的四种化合物的固体CD谱再测试的反思, 强调了依手性化合物的手性光谱学性质不同, 根据浓度梯度实验选择其合适测试浓度的必要性. 对固有手性的阻转异构化合物(S)-1,1'-联二萘酚(S-BINOL)进行了成膜法固体CD谱浓度梯度测试, 发现所得固体薄膜CD谱中也存在着“浓度效应”     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

分子印迹膜的制备研究进展

将分子印迹技术与膜分离技术相结合的分子印迹膜,由于其高选择性,近年来受到了国内外研究者的广泛关注.本文初步探讨了分子印迹膜(MIM) 的两种分离机理以及目前主要的制备方法:同步法和复合法.