Characterisation of Sol-Gel TiO2 Films by Etching

This article describes the SmartKom Companion, one of three demonstrators developed within the SmartKom project whose goal has been to provide an intuitive and intelligent interface for non-expert users to everyday computer-based applications in different scenarios of use. Conceived for the SmartKom Mobile scenario, the Companion allows intuitive multimodal interaction for drivers and pedestrians. The development of the SmartKom prototypes was constantly accompanied by Wizard-of-Oz experiments as well as system evaluations at different stages of the project. Some usability evaluation results relative to the SmartKom Companion will also be presented.     

Molecular structure of mixed adsorption layers surfactant—polymer at a liquid—liquid interface

Isotherms of the binding of dodecyl sulfate anions (DDS^–)and Na⁺ counterions during their coadsorption with a nonionic polymer. proxanol (PR). at the interface of dodecane-water emulsions have been measured by conductometry and Na-selective potentiometry. The adsorption of DDS^– and PR is concurrent. The affinity constant of PR to the interface determined by the Langmuir model decreases as the concentration of PR increases, and the surface concentration of DDS^– tends to a nonzero limiting value at high concentrations of PR. The surface (_o) and electrokinetic () potentials at the interface have been determined at various polymer concentrations by the spin probe and electrophoresis methods. The average dielectric permeability and density of polymer segments in We adsorption layer have been determined by ESR. The lower boundary of the hydrodynamic thickness of the polymer adsorption layer at the interface has been estimated from the dependences of _o and on the ionic strength.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1653–1661, July, 1996.     

电化学法测定几种稀土贮氢合金的热力学函数

贮氢材料由于能可逆地吸放氢,得到了广泛地应用.特别是以贮氢材料为负极制成的氢镍二次电池,容量为同类型镉镍电池的1.5～2倍,且电压又相近,是镉镍电池的理想换代产品,受到人们普遍的关注。LaNi_(4.5)Mn_(0.5),LaNi_(4.9)Sn_(0.1)和La_(0.8)Nd_(0.2)Ni_(2.5)Co_(2.4)Al_(0.1)是电化学性能较优越的贮氢合金。LaNi_(4.5)Mn_(0.5)的电化学容量高,理论容量可达400mAh.g~(-1).LaNi_(4.9)Sn_(0.1)和La_(0.8) Nd_(0.2)     

Adsorption-penetration studies of glucose oxidase into phospholipid monolayers at the 1,2-dichloroethane/water interface.

The interaction between glucose oxidase (GOx) and phospholipid monolayers is studied at the 1,2-dichloroethane/water interface by electrochemical impedance spectroscopy. Electrochemical experiments show that the presence of GOx induces changes in the capacitance curves at both negative and positive potentials, which are successfully explained by a theoretical model based on the solution of the Poisson-Boltzmann equation. These changes are ascribed to a reduced partition coefficient of GOx and an increase of the permittivity of the lipid hydrocarbon domain. Our results show that the presence of lipid molecules enhances the adsorption of GOx molecules at the liquid/liquid interface. At low lipid concentrations, the adsorption of GOx is probably the first step preceding its penetration into the lipid monolayer. The experimental results indicate that GOx penetrates better and forms more stable monolayers for lipids with longer hydrophobic tails. At high GOx concentrations, the formation of multilayers is observed. The phenomenon described here is strongly dependent on 1) the GOx and lipid concentrations, 2) the nature of the lipid, and 3) the potential drop across the interface.     

Are measured values of the Auger parameter always independent of charging effects?

In x‐ray photoelectron spectroscopy (XPS) the Auger parameter is often used to study the electronic properties of elements, particularly in insulator materials, because this parameter is assumed to be independent of charging effects. In this paper we report on subtle differences in sample structure and experimental conditions for which the sample potential may not remain constant during the measurements for some spectrometers or experimental arrangements; for such conditions the Auger parameter is not independent of charging. We compare a series of measurements with insulating plate substrates of Al₂O₃ on which different amounts of SnO₂ and Au were deposited. X‐ray photoelectron spectra were collected for different conditions of the sample that was placed either grounded or left floating on a metallic sample holder during measurement. It is found that the Auger parameter is independent of the experimental conditions for Au but substantial differences were found for deposited SnO₂. Surprisingly, measurement artifacts due to charging appeared in the Auger parameter for Sn when the sample holder was grounded but not when it was left floating. In the grounded samples differences up to 0.6 eV in the Auger parameter for Sn were found with respect to the actual value of this parameter measured with substrates where charging effects were not significant. Because no differences in peak broadening have been observed under different measurement conditions, it has been assumed that the shift was not caused by a conventional differential charging phenomenon. Considering the different response of the substrate and the deposited layer on stabilizing the charge when the sample is grounded, we have worked out a possible explanation to account for the observed artifacts. Instrumental specifications should be optimized very carefully, especially if (as here) relatively high charging shifts point to a non‐optimum self‐biasing of the surface potential at the insulating samples. Copyright © 2003 John Wiley & Sons, Ltd.     

Monolayer films of PS-b-PEO diblock copolymers at the air/water- and an oil/water-interface

 Amphiphilic diblock copolymers consisting of a hydrophobic polystyrene block (PS) and a hydrophilic poly(ethylene oxide) block (PEO) with block sizes of 1000 or 3000 g/mol for both blocks were studied at the air/water and toluene/water interface. Measurements of the film pressure π of spread monolayers at the water surface reveal two limiting regimes of the π−a _m isotherms, in which the mean molecular area a _m is determined either by the size of the hydrophilic or the hydrophobic blocks of the PS-PEO molecules. The interfacial activity of the block copolymers at the toluene/water interface was studied by measuring the interfacial tension σ over a wide range of concentrations. Pronounced differences in the temperature dependence of the interfacial tension were observed, depending mostly on the block length of the hydrophilic PEO block. From the temperature dependence of σ it is inferred that for the block copolymers with the PEO block size of 3000 g/mol the phase inversion temperature (PIT) is well above 60 °C while for those with a PEO block size of 1000 g/mol the PIT is below or near 25 °C in the toluene/water system. Received: 5 February 1998 Accepted: 16 February 1998     

Probing in vitro digestion at oil–water interfaces

Interfacial layers have been widely applied to study the formation and stability of emulsion-based systems. However, the application of isolated interfaces to address digestibility of emulsions is often limited because of the complexity of experimental methods and results. This review summarizes the latest developments in analytical methods and literature data on effects of digestion on interfacial layers. Particular emphasis is given to understand the changes on interfacial magnitudes during oral, gastric, and duodenal digestion, either applied separately or sequentially. Limitations of interfacial aspects and key factors that influence emulsion microstructure in bulk and lipid digestion are identified. Understanding the behavior of interfacial layers upon gastrointestinal digestion promotes an accurate tracking of the physiological fate of emulsions.     

Grain boundary segregation diagrams of α-iron

Based on thermodynamic analysis of interfacial segregation, the segregation enthalpy H ^o of a solute I in a given matrix was found to depend linearly on two mutually independent terms reflecting the type of interface and the solid solubility limit X _infI ^sup* at temperature T and can be written as In this equation, the structural dependence of interfacial segregation is contained in H ^*() which corresponds to the extrapolated segregation enthalpy of a solute with unlimited solubility in the matrix. The product [Tln(X _infI ^sup* )] is essentially constant with temperature, and can therefore be obtained from data for maximum solid solubility, [Tln(X _infI ^sup* )]_max. The parameter v>0 represents the relationship between the activity a _infI ^sup* of a solute at the bulk solid solubility limit in a given matrix and X _infI ^sup* , a _infI ^sup* =(X _infI ^sup* ) ^v , and is characteristic for the matrix. Using recent experimental data for silicon, phosphorus, and carbon segregation at well-characterized grain boundaries in oriented bicrystals of -iron, the averaged value was determined. Values of H ^*() range from -8 kJ/mol (general grain boundaries) up to +8 kJ/mol (special grain boundaries). These values are discussed and used for a more precise and generalized construction of grain boundary segregation diagrams of -iron.