新型成膜电解液添加剂亚硫酸丁烯酯的电化学行为

合成制备了一种新的环状亚硫酸酯类有机溶剂——亚硫酸丁烯酯(BS). 量子化学计算结果表明, 亚硫酸丁烯酯有机溶剂分子的总能、LUMO值比碳酸丙烯酯有机溶剂的低, 具有较强的得电子能力, 不易被氧化. 其作为添加剂与碳酸丙烯酯(PC)混合应用于锂离子电池中, 可有效地抑制PC在石墨电极中的共插入, 能显著改善循环性能.     

Feasibility of using solid sampling graphite furnace atomic absorption spectrometry for speciation analysis of volatile and non-volatile compounds of nickel and vanadium in crude oil

A method for the direct determination of volatile and non-volatile nickel and vanadium compounds in crude oil without previous treatment using direct solid sampling graphite furnace atomic absorption spectrometry is proposed. The crude oil samples were weighed directly onto solid sampling platforms using a microbalance and introduced into a transversely heated solid sampling graphite tube. In previous work of our group losses of volatile nickel and vanadium compounds have been detected, whereas other nickel and vanadium compounds were thermally stable up to 1300 and 1600 °C, respectively. In order to avoid this problem different chemical modifiers (conventional and permanent) have been investigated. With 400 μg of iridium as permanent modifier, the signal started to drop already after two atomization cycles, possibly because of an interaction of nickel (which is a catalyst poison) with iridium. Twenty micrograms of palladium applied in each determination was found to be optimum for both elements. The palladium was deposited on the platform and submitted to a drying step at 150 °C for 75 s. After that the sample was added onto the platform and submitted to the furnace program. The influence of sample mass on the linearity of the response and on potential measurement errors was also investigated using four samples with different nickel content. For the sample with the lowest nickel concentration the relationship between mass and integrated absorbance was found to be non-linear when a high sample mass was introduced. It was suspected that the modifier had not covered the entire platform surface, which resulted in analyte losses. This problem could be avoided by using 40 μL of 0.5 g L⁻¹ Pd with 0.05% Triton X-100. Calibration curves were established with and without modifier, with aqueous standards, oil-in-water emulsions and the certified reference material NIST SRM 1634c (trace metals in residual fuel oil). The sensitivity for aqueous standards and emulsions was close to that for SRM 1634c, making possible the use of aqueous standards for calibration. The limits of detection and quantification obtained for nickel and vanadium under this condition were found to be 0.02 and 0.06 μg g⁻¹, respectively, for both elements, based on 10 mg of sample. Nickel and vanadium were determined in the samples with (total Ni and V) and without the use of Pd (thermally stable compounds), and the concentration of volatile compounds was calculated by difference. The results were compared with those obtained by high-resolution continuum source graphite furnace atomic absorption spectrometry by emulsion technique; no significant differences were found for total Ni and V at the 95% confidence level according to a Student's t-test.     

Iron speciation by solid phase extraction and flame atomic absorption spectrometry using N,N′-bis-(2-hydroxy-5-bromobenzyl)-2-hydroxy-1,3-diiminopropane

A new Schiff base, N,N′-bis-(2-hydroxy-5-bromobenzyl)-2-hydroxy-1,3-diiminopropane, has been synthesized for the very sensitive determination of iron(III) and iron(II) in natural water samples. It enabled a very selective and rapid method for iron determination to be developed. The method has also been applied to total iron determination in sediment samples. In the preconcentration system, the Schiff base reagent is mixed with the samples and chelates containing iron(III). The complexes are then adsorbed on silica gel within a column system. Elution of the adsorbed chelate from the silica gel was performed with a small volume of acetone containing 2.5% nitric acid. The iron is measured off-line by flame atomic absorption spectrometry. The method can be applied to the preconcentration, separation and speciation of iron. The effects of parameters such as pH, sample flow rate, eluent flow rate, foreign ions and ligand concentration have been investigated. The effect of humic acid that can produce complexes with metal ions in natural systems has also been investigated. The results obtained indicate that the method is not affected by the presence of up to 10 ppm humic acid, which would be a very high concentration to be present in natural systems. The solid phase extraction method developed has been applied to the determination of iron in both natural water samples and sediment samples. The LOD was found to be 0.17 mg L⁻¹ when no preconcentration was used, although preconcentration factors of 100 could be achieved. The recovery values for spiked samples were between 100 and 104%. The results were compared statistically with those from the standard 1,10 phenanthroline method used for iron speciation in water systems. A Student’s t-test indicated no significant difference between the two methods. In addition, this method was applied to the analysis of a certified sediment sample, LGC 6156. Generally, a 10-fold preconcentration factor was required for the analysis of natural water samples.     

LSGMC5含量对于二甲醚燃料电池复合Ni-Fe阳极性能的影响

用浸渍法制备了掺杂不同质量分数的La0.8Sr0.2Ga0.8Mg0.15Co0.05O3-δ (LSGMC5)粉末的Ni8-Fe2-LSGMC5复合阳极, 并采用交流阻抗和直流极化技术考察了以氢气和二甲醚为燃气时该复合阳极的电化学性能及相应电池的功率输出特性. 结果表明, 在电极中掺入LSGMC5 粉末, 能显著地改善电极的形貌和电极/电解质界面结构, 减小欧姆电阻和极化电阻. 电极中LSGMC5 粉末含量对于氢气及二甲醚电化学氧化性能的影响显著不同. 以二甲醚为燃气时, 电极极化电阻随LSGMC5 粉末含量的增加而减小, 其中LSGMC5 掺杂量为30%的复合阳极具有最高的电化学性能, 相应电池在1073、1023、973 K 时的输出功率分别为1.00、0.61、0.40 W·cm-2; 以氢气为燃气时, LSGMC5 掺杂量为20%的复合阳极具有最好的电化学性能, 随着LSGMC5 掺杂量的进一步增加, 电极极化电阻显著增大.     

染料配体脲醛树脂-二氧化锆复合微球的制备及对牛血清白蛋白的萃取性能

采用溶胶-凝胶法制备无孔脲醛树脂-二氧化锆复合微球,在碳酸盐缓冲溶液中,利用微球表面的酰胺键与三嗪染料-活性艳蓝X-BR分子中三嗪环上的活泼氯反应,将染料键合到微球表面,以牛血清白蛋白(BSA)为样品,考察了不同条件下,该萃取剂对BSA的萃取能力。结果表明,该萃取剂对BSA的饱和萃取量达到30.3 mg.g-1,同时萃取的蛋白易于洗脱,1.0 mol.L-1氰化钾的洗脱率达到93.5%。     

高效液相色谱法测定茄科植物废弃物中茄尼醇

采用高效液相色谱法对我国东北地区茄科植物废弃物马铃薯、茄子、番茄和辣椒的叶片中茄尼醇进行了定性和定量分析。结果表明:马铃薯和茄子的叶片中茄尼醇质量分数较高,分别可达到0.331%和0.207%;番茄和辣椒的叶片中茄尼醇的质量分数分别为0.092%和0.089%。方法的线性范围为0.61~6.10μg,回收率为99.5%~103.3%。     

Cross-linking epoxide resins with hydrolysates of chrome-tanned leather waste

Differential scanning calorimetry was employed to investigate the reaction of diglycidyl ethers of bisphenol A (DGEBA) of mean molecular mass 348–480 Da, with collagen hydrolysate of chrome-tanned leather waste in a solvent-free environment. The reaction leads to biodegradable polymers that might facilitate recycling of plastic parts in products of the automotive and/or aeronautics industry provided with protective films on this basis. The reaction proceeds in a temperature interval of 205–220°C, at temperatures approx. 30–40°C below temperature of thermal degradation of collagen hydrolysate. The found value of reaction enthalpy, 519.19 J g⁻¹ (= 101.24 kJ mol⁻¹ of epoxide groups) corresponds with currently found enthalpy values of the reaction of oxirane ring with amino groups. Reaction heat depends on the composition of reaction mixture (or on mass fraction of diglycidyl ethers in the reaction mixture); proving the dependence of kinetic parameters of the reaction (Arrhenius pre-exponential factor A (min⁻¹) and activation energy E _a (kJ mol⁻¹)) did not succeed. Obtained values of kinetic parameters are on a level corresponding to the assumption that reaction kinetics is determined by diffusion.     

用于示踪分析的固体汞合金电极线性扫描伏安法测痕量钼

研究了可用于示踪分析测定痕量钼的固体银汞合金电极催化伏安法.在H2SO4-苯羟乙酸-氯酸钾体系中,采用该电极于-0.165V(vs.SCE)处出现灵敏的还原峰,Mo的质量浓度在0～200 ng/mL范围内与峰高呈良好线性关系,检出限为0.42 ng/mL.该方法操作简便、快速,同时又可避免传统汞电极使用中带来的不便和毒性.对实际水样进行了测定.     

Identification of Earth Pigments by Applying Hierarchical Cluster Analysis to Solid State Voltammetry. Application to Severely Damaged Frescoes

Multivariate chemometric methods are applied for identifying earth pigments from square‐wave voltammetric measurements performed at pigment‐modified paraffin‐impregnated graphite electrodes allowing for a separation between hematite‐based earths, French ochres, Spanish ochres, siennas, umbers and green earths. This methodology is applied to the identification of the pigments in samples from the ceiling frescoes of Antonio Palomino (dated 1707) in the vaulted nave of the Sant Joan del Mercat church in Valencia (Spain). These frescoes suffered considerable damage by fire during the Spanish Civil War in 1936, resulting in severe chemical and chromatic alterations. Electrochemical data, supported by scanning electron microscopy/energy dispersive X‐ray microanalysis and Raman spectroscopy, indicate that thermal stress induced the transformation of goethite‐based yellow ochres into hematite and magnetite.     

A new Cu(II)-5-(4-sulphophenylazo)-8-aminoquinoline complex used for copper determination in presence of gold and silver in water and mineral samples

In this work, a characterization of reagent chromophere 5-(4-sulphophenylazo)-8-aminoquinoline [SPA] by IR and ¹H RMN was carried out and a pK_a value of 3.55 ± 0.03 was found as well. An 1:2 stoichiometry for the Cu(II)-SPA complex was determined at pH 9 by Job and molar ratio methods. A value of 1.4 × 10¹⁴ for the stability constant was also found. Based on the formation of this complex a new method for the copper determination in presence of gold and silver was developed by derivative spectrophotometry using a previous preconcentration on solid phase. In this method, the analytical measures were executed directly in the solid phase containing the complex. The Cu(II) reacts with the reagent chromophere SPA previously retained in the anionic exchange DEAE Sephadex A25. In this determination, the first derivative at 605 nm was used. The quantification range was between (3.2 ± 0.3 × 10⁻¹) × 10⁻⁸ and (94.4 ± 0.9) × 10⁻⁸ mol L⁻¹ (3.2 ± 0.3 × 10⁻¹) × 10⁻⁸ , and (94.4 ± 0.9) × 10⁻⁸ mol L⁻¹. The repeatability expressed as RSD was between 1.1 and 2.0%. The method was applied successfully for the copper determination in mineral residuals and natural water samples. The results were consistent with those provided by ICP-mass spectrometry.