A multi-residue cation-exchange clean up procedure for basic drugs in produce of animal origin

There is considerable interest in maximising the amount of information obtained from animal product analyses, when screening for the presence of veterinary drug residues. One of the barriers to effective multi-residue analysis to date has been a lack of effective clean up procedures to isolate a wide range of residues from the potential interferents, which may be present in both simple and complex (including processed) foods. A cation-exchange clean up has, therefore, been developed for use with acetonitrile extracts of foods, when analysing for several basic drug groups (sulfonamides, benzimidazoles, levamisole, nitroimidazoles, tranquillisers and fluroquinolones). The clean up procedure has also been shown to be effective using a modified extraction solvent for malachite green and leucomalachite green in fish.Several of the key parameters that influence analyte recovery have been investigated and in an optimised procedure, tissue/biofluid samples containing sulfonamides, benzimidazoles, levamisole, nitroimidazoles, tranquillisers and fluoroquinolones are first extracted with acetonitrile. The extract is then dried with sodium sulfate and acidified with glacial acetic acid before loading onto a Bond Elut, strong cation-exchange (SCX) solid phase extraction (SPE) cartridge. Extracts from fish containing malachite green and leucomalachite green can be cleaned up using the same SCX SPE procedure following extraction with citrate buffer/acetonitrile. Typical recoveries of drugs from low level fortified tissues using the optimised procedure lie in the range 53-104% with the exception of carazolol from pig kidney (31%), malachite green from trout (42-51%) and ciprofloxacin from chicken muscle (44%) and from egg (21%).     

Solid phase extraction and preconcentration of uranium(VI) and thorium(IV) on Duolite XAD761 prior to their inductively coupled plasma mass spectrometric determination

A simple and effective method is presented for the separation and preconcentration of thorium(IV) and uranium(VI) by solid phase extraction on Duolite XAD761 adsorption resin. Thorium(IV) and uranium(VI) 9-phenyl-3-fluorone chelates are formed and adsorbed onto the Duolite XAD761. Thorium(IV) and uranium(VI) are quantitatively eluted with 2 mol L⁻¹ HCl and determined by inductively coupled plasma-mass spectrometry (ICP-MS). The influences of analytical parameters including pH, amount of reagents, amount of Duolite XAD761 and sample volume, etc. were investigated on the recovery of analyte ions. The interference of a large number of anions and cations has been studied and the optimized conditions developed have been utilized for the trace determination of uranium and thorium. A preconcentration factor of 30 for uranium and thorium was achieved. The relative standard deviation (N = 10) was 2.3% for uranium and 4.5% for thorium ions for 10 replicate determinations in the solution containing 0.5 μg of uranium and thorium. The three sigma detection limits (N = 15) for thorium(IV) and uranium(VI) ions were found to be 4.5 and 6.3 ng L⁻¹, respectively. The developed solid phase extraction method was successively utilized for the determination of traces thorium(IV) and uranium(VI) in environmental samples by ICP-MS.     

SPME – A valuable tool for investigation of flower scent

A novel Headspace Solid Phase Microextraction (HS‐SPME) protocol is proposed for the analysis of floral scent. Volatile compounds emitted from the flower are collected on a Carboxen/PDMS fiber for 1 hour, transferred to the GC, and analyzed by GC/MS. The method completely eliminates the use of organic solvents, does not require special instrumentation, and may readily be performed in the field without access to mains electricity and other energy supplies. The method is robust, sensitive, and reduces the sampling stress on the investigated plant. Since enzymatic reactions in living flowers may cause changes in the composition of emitted fragrance, dried rosemary (Rosmarinus officinalis L.) was used as a stable standard for the method development and optimization. In addition, grape wine was also suggested as homogeneous, bio‐compatible, and relatively stable standard of pronounced and typical scent for the same purpose. The optimized method was used for the comparative investigation of the fragrances emitted by two different species – Lathyrus vernus (L.) and Orchis pallens (L.). Several monoterpenes (C10 compounds) were found as the main fragrance components of lathyrus, while sesquiterpenes (C15 compounds) were typical for the orchid.     

Solvent and thiourea adsorption/intercalation effects on the solid-state electrochemistry of α-phase nickel hydroxide nanoparticles

Nanoparticles of α-phase nickel hydroxide were synthesized by a single-step hydrothermal method using urea as the hydrolytic agent. Precipitated powders were of pure turbostratic α-phase as confirmed by x-ray diffraction profile. The ageing of α-Ni(OH)₂ in 1.0 M alkali solutions is investigated for pure non-intercalated α-Ni(OH)₂ and thiourea intercalated/absorbed α-phase nanomaterials. The α-Ni(OH)₂ powder immobilized on the surface of graphite electrodes shows a gradual α→β phase transformation with continuous voltammetric cycling, and the concentration gradient of water that exists in the layered-double-hydroxide-like interlayers of α-phase and the solution was shown to play a crucial role on the high electrochemical activity of this phase nickel hydroxide. To understand the role of water in the ageing process, concomitant entries of non-aqueous solvents like ethanol and acetonitrile along with thiourea were effected. Cyclic voltammetric measurements of thiourea-treated α-Ni(OH)₂ samples revealed that hydroxyl ion influx during the anodic oxidation depends on the counter flux of solvent molecules, and if the intercalated the solvent is acetonitrile, then the electrochemical activity of α-Ni(OH)₂ reduced drastically; Q _a/Q _c>1 for water as solvent in the interlayers α-Ni(OH)₂ and Q _a/Q _c<1 for ethanol and acetonitrile as solvents. The α-phase gets stabilized in the presence of thiourea with water and ethanol as co-intercalates. Transmission electron microscope images of α-Ni(OH)₂ and thiourea-treated samples show a change in particle size and morphology. Elemental CHNS analysis confirms the presence of sulphur in the thiourea intercalated samples.     

Simplified Solid-Phase Extraction Procedure and Liquid Chromatographic Determination of Celecoxib in Rat Serum

A simplified solid phase extraction method, eliminating a preliminary protein precipitation has been developed for the determination of celecoxib in rat plasma. The technique included a solid phase extraction of the serum samples on a [poly (divinylbenzene-co-N-vinylpyrrolidone)] sorbent. After conditioning, the cartridge was loaded with 0.5 mL of acidified serum containing internal standard. Elution was made with 1 mL of a mixture of acetonitrile and methanol (1/1, v/v). After evaporation of the eluate to dryness and reconstitution with methanol, the samples were analyzed on an octadecyl bonded phase with several mobile phases containing acetonitrile and a phosphate buffer. Detection was carried out using a Photodiode Array Detector. Full validation of the proposed method was provided (linearity range: 0.01–2 mg. L^–1, average extraction efficiency: 92.4%; average intra-day variability: 4.6% with an accuracy of 94.8%; average interday variability: 5% with an accuracy of 95.3%, limit of detection: 0.005 mg. L^–1, limit of quantification: 0.002 mg. L^–1). The proposed method was successfully utilised to quantify celecoxib in rat plasma for a pharmacokinetic study.Revised: 26 January and 23 April 2004     

Solid products and rate-limiting step in the thermal half decomposition of natural dolomite in a CO2 (g) atmosphere

Natural dolomite powders obtained from caves which give unusual high resistance building materials, have been decomposed in a Knudsen cell at high CO₂ pressures in the temperature range of 913-973 K. XRD traces for the final solid products, after the first half thermal decomposition, have shown, that beside the XRD patterns for the calcite and MgO, the existence of a new structure with major peaks at 2θ equal to 38.5 and 65°. This finding has been ascribed to a solid solution of MgO in calcite. The kinetic analysis of the TG curves yield a total apparent enthalpy (ΔH^∗) for the decomposition equal to 440±10 kJ mol⁻¹ for a range of fraction decomposed (α) varying between 0.2 and 0.7. This value is much closer to the theoretical expected at 950 K value ΔH=486 kJ mol⁻¹ for the dolomite decomposition in CO₂ environment, where CaO, MgO and oxides of solid solution can be the solid reaction products. The rate determining step is the transport of CO₂ across the reacting interface through an high activated thermal process due to solid state diffusion of CO₃²⁻ in the bulk and/or the grain boundaries phases of CaCO₃ and/or of the solid solution. The microstructure evolution of the solid products follows a shear-transformation mechanism. At temperatures below 943 K, porous product particles are characterized by a monomodal narrow pore size distribution around 0.05 μm. At higher temperatures, a critical level of tensions inside the particles is reached and a bimodal pore size distribution around 1 and 0.05 μm is formed.     

V(Ⅴ)促进SO_4~(2-)/ZrO_2固体超强酸的制备及催化反应

用低温陈化的方法制得V(Ⅴ)促进型SO42-/ZrO2固体超强酸(SZV),用流动指示剂法测定其酸强度,用IR,XRD和XPS进行结构表征,并将制得的催化剂用于催化乙酸和丙三醇的酯化反应.结果表明,低温陈化样品比常温陈化有更强的酸性和更高的催化活性,IR谱图中S O键的伸缩振动峰显著增强,在600~650℃的焙烧温度下,低温陈化样品的晶体结构为ZrO2四方相,XPS图中Zr3d峰位出现较大的化学位移,表明低温陈化使SZV样品具有较高的酸性.     

XRD and Si MAS-NMR spectroscopy across the β-Lu2Si2O7-β-Y2Si2O7 solid solution

Samples in the system Lu_2−xY_xSi₂O₇ (0?x?2) have been synthesized following the sol-gel method and calcined to 1300 °C, a temperature at which the β-polymorph is known to be the stable phase for the end-members Lu₂Si₂O₇ and Y₂Si₂O₇. The XRD patterns of all the compositions studied are compatible with the structure of the β-polymorph. Unit cell parameters are calculated as a function of composition from XRD patterns. They show a linear change with increasing Y content, which indicates a solid solubility of β-Y₂Si₂O₇ in β-Lu₂Si₂O₇ at 1300 °C. ²⁹Si MAS NMR spectra of the different members of the system agree with the XRD results, showing a linear decrease of the ²⁹Si chemical shift with increasing Y content. Finally, a correlation reported in the literature to predict ²⁹Si chemical shifts in silicates is applied here to obtain the theoretical variation in ²⁹Si chemical shift values in the system Lu₂Si₂O₇-Y₂Si₂O₇ and the results compare favorably with the values obtained experimentally.     

Quantitative Analysis of Sulfonamide Residues in Natural Animal Casings by HPLC

A multiresidue method has been developed for the simultaneous determination of sulfadiazine, sulfathiazole, sulfapyridine, sulfamerazine, sulfamethoxydiazine, sulfamethylthiazole, sulfamethazine, sulfamonomethoxine, sulfamethoxypyridazine, sulfisoxazole, sulfamethoxazole, sulfadimethoxine and sulfaquinoxaline in natural animal casings by HPLC after solid-phase extraction. The sulfonamides were extracted with acetonitrile and the extract cleaned up with an Oasis MCX SPE cartridge prior to analysis. Separation was on a ZOBAX Eclipse XDB-C₈ column using gradient elution with acetonitrile/methanol/0.1% acetic acid. The effect of separation conditions on chromatographic behavior and recovery has been studied. Calibration graphs were linear with very good correlation coefficients (r = 0.9983−0.9996) in the concentration range from 0.02 to 1 μg mL⁻¹. The limits of quantitation (LOQ) for the 13 sulfonamides were in the range of 1.5–2.2 μg kg⁻¹. Decision limits (CCα) and detection capabilities (CCβ) were in the range of 105.2–111.0 and 113.0–120.2 μg kg⁻¹, respectively. The recovery for casings spiked with 1.5–100 μg kg⁻¹ ranged from 65.2 to 85.9%. The relative standard deviations (RSDs) of the sulfonamides for six measurements at 100 μg kg⁻¹ were from 2.2 to 7.7%. The applicability of the method to the analysis of salted swine casings, salted sheep casings and dry casing samples was demonstrated.     

Solid-state,optical-rotation measurements on macromolecules using powder-suspensions

Summary We report techniques for measuring optical rotation of suspended solids, including dissymmetric molecular crystals (e.g. sodium chlorate and bromate), synthetic polymers, polypeptides and biopolymers. Examples include poly(triphenylmethyl methacrylate), poly-S-lactide, poly-L-hydroxyproline, hemocyanine, cellulose acetate andRNA. The results indicate that optical rotation measurements are sensitive to differences in secondary structure and can serve as a probe for structural differences between solid-state and solution.

---

Messung der optischen Rotation von Makromolekülen im Festzustand unter Verwendung von Pulversuspensionen

Zusammenfassung Es wird über eine Methode zur Messung der optischen Rotation von Festkörpern in Suspensionen berichtet, wobei dissymetrische Kristalle (z. B. Natriumchlorat und -bromat), synthetische Polymere, Polypeptide und Biopolymere behandelt werden. Die Beispiele umfassen Poly(triphenylmethylmethacrylat), Poly-S-lactid, Poly-L-hydroxyprolin, Hemocyanin, Celluloseacetat undRNA. Die Ergebnisse zeigen, daß die optischen Rotationen bezüglich Unterschiede in der Sekundärstruktur empfindlich sind und daß diese Messungen als ein Maß für Strukturunterschiede zwischen Festzustand und Lösung herangezogen werden können.