Interfacing on-line solid phase extraction with monolithic column multisyringe chromatography and chemiluminescence detection: An effective tool for fast, sensitive and selective determination of thiazide diuretics

A new, multisyringe flow injection set-up has been developed for the completely automated determination of trace thiazide compounds with diuretic action in different types of samples. The proposed instrumental set-up exploits for the first time, a low pressure on-line solid phase extraction-liquid chromatography-chemiluminescence detection method. This novel combination of sample treatments in flow systems expands the current applicability of low pressure liquid chromatography due to the isolation/preconcentration of the target compounds, besides high selectivity and sensitivity.For the determination of three thiazide compounds named hydroflumethiazide, furosemide and bendroflumethiazide, the proposed set-up provided with the preconcentration of only 1 mL of sample, limits of detection of 3, 60 and 40 μg L⁻¹, respectively. Furthermore wide linear dynamic ranges of 6-4000, 140-20,000 and 90-40,000 μg L⁻¹, respectively, were obtained. Besides of this, a high injection throughput of 12 h⁻¹ was also achieved. As in sports, thiazide diuretics are prohibited substances, the proposed method has been applied to their determination in urine samples. Furthermore the potential of the proposed method as a fast-screening approach for emerging contaminants in waters has been also tested by applying it to well water and leachates from a solid waste landfill.     

Simultaneous spectrophotometric determination of trace amounts of uranium, thorium, and zirconium using the partial least squares method after their preconcentration by α-benzoin oxime modified Amberlite XAD-2000 resin

A new solid phase extraction method for separation and preconcentration of trace amounts of uranium, thorium, and zirconium in water samples is proposed. The procedure is based on the adsorption of U(VI), Th(IV) and Zr(IV) ions on a column of Amberlite XAD-2000 resin loaded with α-benzoin oxime prior to their simultaneous spectrophotometric determination with Arsenazo III using orthogonal signal correction partial least squares method. The enrichment factor for preconcentration of uranium, thorium, and zirconium was found to be 100. The detection limits for U(VI), Th(IV) and Zr(IV) were 0.50, 0.54, and 0.48 μg L⁻¹, respectively. The precision of the method, evaluated as the relative standard deviation obtained by analyzing a series of 10 replicates, was below 4% for all elements. The practical applicability of the developed sorbent was examined using synthetic seawater, natural waters and ceramic samples.     

Determination of triazine herbicides using membrane-protected carbon nanotubes solid phase membrane tip extraction prior to micro-liquid chromatography

A novel microextraction technique termed solid phase membrane tip extraction (SPMTE) was developed. Selected triazine herbicides were employed as model compounds to evaluate the extraction performance and multiwall carbon nanotubes (MWCNTs) were used as the adsorbent enclosed in SPMTE device. The SPMTE procedure was performed in semi-automated dynamic mode and several important extraction parameters were comprehensively optimized. Under the optimum extraction conditions, the method showed good linearity in the range of 1–100 μg/L, acceptable reproducibility (RSD 6–8%, n = 5), low limits of detection (0.2–0.5 μg/L), and satisfactory relative recoveries (95–101%). The SPMTE device could be regenerated and reused up to 15 analyses with no analyte carry-over effects observed. Comparison was made with commercially available solid phase extraction-molecular imprinted polymer cartridge (SPE-MIP) for triazine herbicides as the reference method. The new developed method showed comparable or even better results against reference method and is a simple, feasible, and cost effective microextraction technique.     

New use of polypyrrole-chloride for selective preconcentration of copper prior to its determination of flame atomic absorption spectrometry

Polypyrrole-chloride was studied as a new sorbent for preconcentration of copper(II) using solid-phase extraction prior to determination by flame atomic absorption spectrometry. The sorbent showed an extremely high selectivity towards copper(II) as an anionic chelate, i.e. Cu (pyrocatechol violet)₂²⁻ in the pH range of 4-7. Copper(II) as Cu (pyrocatechol violet)₂²⁻ was selectively retained on a column containing 1.0 g of polypyrrole-chloride and quantitatively eluted by 3 mL of 2.0 mol L⁻¹ nitric acid. The calibration graph was linear with a correlation coefficient of 0.999 at levels near the detection limit and up to at least 50 μg L⁻¹. When applied for preconcentration and determination of copper in tap water, waste water and hot spring water, the recoveries were found to be 96, 101 and 95%, respectively, with high precision (% relative standard deviation <4%) and low detection limit (0.87 μg L⁻¹). Verification of the accuracy was carried out by the analysis of a standard reference material (BCR 715 wastewater-SRM). The relative error was +3.33%. The proposed method was successfully applied to the determination of copper in tap water, waste water and hot spring water samples.     

以活性炭为燃料的固体氧化物燃料电池(英文)

采用注浆成型法制备了管状电解质支撑的固体氧化物燃料电池(SOFC),电解质材料为YSZ,阳极和阴极材料都采用银.将活性炭不加任何气体直接用作电池的燃料.电池的有效面积为2.5cm2,在800℃时给出最大功率为16mW,其开路电压随温度的变化与理论结果一致.此电池在30mA的恒电流下连续稳定运行了37h,通过电化学反应消耗了加入电池中碳燃料的42%(w),证明了电池的工作是可以自维持的.与使用石墨燃料的SOFC相比,此电池的运行稳定性得到了明显的提高,因为活性炭比石墨具有大得多的微孔率和表面积.电池运行37h后很快衰减,燃料烧结和燃料量减少造成碳表面积减小可能是衰减的主要原因.电化学阻抗谱测试结果表明电池的极化电阻在电池的总损耗中占主导.通过对电池反应机理进行分析,认为发生在阳极/电解质界面的CO电化学氧化反应和发生在碳燃料表面的Boudouard反应构成的循环维持了电池的运行,因此通过添加促进上述两个反应的催化剂,可提高电池的性能.     

Ce_(1-x)Fe_xO_2复合氧化物的结构及其催化碳烟低温燃烧性能

用水热法制备了不同摩尔比的系列Ce1-xFexO2复合氧化物碳烟燃烧催化剂.采用X射线粉末衍射(XRD)、比表面积(BET)、拉曼光谱(Raman)、H2程序升温还原(H2-TPR)及程序升温氧化反应(TPO)等技术考察了Fe含量对催化剂结构和性能的影响,重点探讨了催化剂表面性质和体相结构与催化活性和稳定性之间的关系.结果表明,Fe3+较难进入CeO2晶格中,部分Fe2O3分散在CeO2表面.铈铁固溶体(氧空位)有利于氧的吸附活化,而表面氧化铁对提高催化剂的抗老化能力起着重要作用.Ce0.8Fe0.2O2有最高的Fe3+掺杂量,有良好分散性的表面Fe2O3,显示出最好的催化活性和稳定性,催化碳烟的起燃温度(Ti)和生成CO2的峰值温度(Tp)分别为262和314℃.Ce0.8Fe0.2O2高温老化后的Ti和Tp仍较低,分别为292和392℃.     

电解液组成对尖晶石LiMn_2O_4中锂离子嵌脱过程的影响

运用电化学阻抗谱(EIS)研究了尖晶石LiMn2O4正极在1mol·L-1LiPF6-EC(碳酸乙烯酯)∶DEC(碳酸二乙酯)∶DMC(碳酸二甲酯),1mol·L-1LiPF6-EC∶DEC∶EMC(碳酸甲乙酯)和1mol·L-1LiPF6-EC∶DMC三种不同电解液中,-20-20℃范围内的阻抗谱特征随温度的变化.研究结果表明,温度强烈影响尖晶石LiMn2O4正极的阻抗谱特征,而电解液组成对尖晶石LiMn2O4正极阻抗谱特征的影响较小,但电解液组成对锂离子在尖晶石LiMn2O4正极中嵌入脱出过程相关动力学参数影响较大.测得尖晶石LiMn2O4正极在上述三种电解液中,锂离子迁移通过固体电解质相界面(SEI)膜的离子跳跃能垒平均值分别为7.60、16.40和18.40kJ·mol-1;电子电导率的热激活化能平均值分别为44.77、35.47和68.06kJ·mol-1;嵌入反应活化能平均值分别为52.19、46.19和69.86kJ·mol-1.     

固相缩聚法制备高粘度尼龙1111

采用固相缩聚工艺提高尼龙1111的相对粘度,是制备高粘度尼龙1111的有效方法之一。固相后缩聚法制备相对粘度高于2.5的高粘度尼龙1111,宜选择初始相对粘度为2.0的尼龙1111,反应时间12h,反应温度175℃。增粘后的尼龙1111具有更为优良的物理机械性能。     

Total synthesis of endothelin 1 by microwave-assisted solid phase method

<正>A microwave-assisted solid phase synthesis for endothelin 1 is presented.Reduced endothelin 1 was synthesized efficiently on Wang resin under microwave irradiation using Fmoc/tBu orthogonal protection strategy.The whole peptide was cleaved from the resin and two disulphide bridges were formed under air oxidation at room temperature.The purity and efficiency of synthesizing the peptide is much higher than other methods used before.     

An efficient synthesis of 2,2-bis(1H-indol-3-yl)-2H-acenaphthen-1-one catalyzed by recyclable solid superacid SO_4~(2-)/TiO_2 under grinding condition

<正>An efficient synthesis of symmetrical 2,2-bis(1H-indol-3-yl)-2H-acenaphthen-1-one is achieved via a reaction of acenaphthe-nequinone and indoles catalyzed by solid superacid SO_4~(2-)/TiO_2 under solvent-free conditions at room temperature by grinding, which provides an efficient route to the synthesis of symmetrical 2,2-bis(1H-indol-3-yl)-2H-acenaphthen-1-one.This procedure offers several advantages including solvent-free conditions,excellent yields of products,simple work-up as well as reuse of catalysts which makes it a useful and attractive protocol for the synthesis of these compounds.