化学浴沉积方法制备硫化铟敏化太阳电池及其性能研究

硫化铟是一种稳定、低毒性的半导体材料. 本文采用低成本的化学浴沉积方法制备了硫化铟敏化太阳电池, X射线衍射(XRD)、光电子能谱(XPS)和扫描电镜(SEM)结果表明形成了硫化铟敏化的二氧化钛薄膜. 化学浴沉积温度对所得硫化铟敏化薄膜的形貌有显著的影响, 进而影响电池性能. 温度太低时, 化学浴沉积反应速率太低, 只发生少量沉积; 温度太高时, 化学浴沉积反应速率较快, 硫化铟来不及沉积到二氧化钛多孔薄膜内部. 当温度在40℃时, 硫化铟沉积均匀性最好, 薄膜的光吸收性能最佳, 电池的短路电流最大, 另外, 填充因子达到最佳, 为65%, 电池总体光电转换效率为0.32%.     

Trash GGBFS-based geopolymer as a novel sunlight-responsive photocatalyst for dye discolouration

In this study, we report a waste material-ground granulated blast furnace slag (GGBFS) as a low cost geopolymer, hybridised with ZnO to form a novel and efficient photocatalyst capable of discolouring textile wastewater. GGBFS is a waste material in an iron industry. Methylene blue was used as the probe dye and natural sunlight was used for activation of the photocatalyst. It was observed that under the experimental conditions, ZnGP-40 exhibited twice the discoloration efficiency than conventionally used ZnO or TiO₂. This enhanced performance is majorly attributed to increased surface area of ZnO when strewn in the GGBFS matrix. The photocatalysts were characterized by SEM, TEM, PSA, TGA, BET and UV–Vis/NIR. The effect of photocatalyst loading, speed of agitation and solar insolation has also been studied. Since this study has been performed in direct sunlight, it exhibits a realizable application of solar energy in the treatment of wastewater.     

Superatomic chemistry

Superatoms are atomic clusters with tailored size and composition that mimic the chemistry of atoms in the periodic table. However, unlike the atoms whose chemistry is governed by their valence electron orbitals, the chemistry of superatoms is governed by their highest occupied molecular orbitals. In addition, due to their large size and non-spherical geometry, superatoms can promote unusual reactions and serve as the building blocks of cluster assembled materials with properties very different from conventional materials. This perspective highlights the unique role of superatoms in chemical and material sciences by focusing on superhalogens, which not only possess electron affinities larger than those of halogens but also can be stable when multiply charged. We discuss how these unique features of superhalogens enable noble gas atoms like argon to form chemical bonds at room temperature and zinc to exhibit an oxidation state of +3. The advantages of using superhalogens in the synthesis of water-resistant materials for solar cells, halogen-free electrolytes for solid-state batteries, and multiferroic materials are also discussed.     

Experimental design approach for petrochemical waste water treatment using solar assisted photo Fenton process

In this study, the effect of photo-Fenton process on the treatment of petrochemical waste water treatment was investigated. The influence of process conditions were determined by factorial design. Optimization of the process conditions were performed by central composite design. Under, optimized conditions lab scale and solar assisted pilot scale of petrochemical waste water treatment was performed. Three factors namely initial pH, H₂O₂ concentration (mM) and Fe²⁺ concentration (mM) executed the essential role in petrochemical waste water treatment. Central composite design resulted in the prediction of optimized value as 6.5 initial pH, 15.65 mM of H₂O₂ concentration and 2.09 mM of Fe²⁺ concentration. Under these conditions, the reduction in chemical oxygen demand (COD) percentage reached about 68.67 ± 2.8% after 280 min in pilot scale of solar assisted photo Fenton process of petrochemical waste water treatment. Thus, experimental design combined with advanced Fenton process can become a feasible unconventional method for petrochemical waste water treatment.     

Near-infrared quantum cutting in Yb3+ ion doped strontium vanadate

The materials Sr_3−x(VO₄)_2:xYb were successfully synthesized by co-precipitation method varying the concentration of Yb³⁺ ions from 0 to 0.06 mol. It was characterize by powder X-ray powder diffraction (XRD) and surface morphology was studied by scanning electronic microscope (SEM). The photoluminescence (PL) properties were studied by spectrophotometers in near infra red (NIR) and ultra violet visible (UV–VIS) region. The Yb³⁺ ion doped tristrontium vanadate (Sr₃(VO₄)₂) phosphors that can convert a photon of UV region (349 nm) into photons of NIR region (978, 996 and 1026 nm). Hence this phosphor could be used as a quantum cutting (QC) luminescent convertor in front of crystalline silicon solar cell (c-Si) panels to reduce thermalization loss due to spectral mismatch of the solar cells. The theoretical value of quantum efficiency (QE) was calculated from steady time decay measurement and the maximum efficiency approached up to 144.43%. The Sr_(3−x) (VO₄)_2:xYb can be potentiality used for betterment of photovoltaic (PV) technology.     

Spectral downshifting from blue to near infer red region in Ce3+-Nd3+ co-doped YAG phosphor

The YAG phosphors co-doped with Ce³⁺-Nd³⁺ ions by varying concentration of Nd³⁺ ion from 1 mol% to 15 mol% were successfully synthesized by conventional solid state reaction method. The phosphors were characterized by powder X-ray powder diffraction (XRD) and surface morphology was studied by scanning electronic microscope (SEM). The photoluminescence (PL) properties were studied in near infra red (NIR) and ultra violet visible (UV–VIS) region. The synthesized phosphors can convert a blue region photon (453 nm) into photons of NIR region (1063 nm). The energy transfer (ET) process was studied by time decay curve and PL spectra. The theoretical value of energy transfer efficiency (ETE) was calculated from time decay luminescence measurement and the maximum efficiency approached up to 82.23%. Hence this phosphor could be prime candidate as a downshifting (DS) luminescent convertor (phosphor) in front of crystalline silicon solar cell (c-Si) panels to reduce thermalization loss in the solar cells.     

过渡金属电催化剂在硅基光阳极分解水产氧中的作用

光电化学分解水可将太阳能转换为绿色的氢能,为目前的能源危机和环境问题提供了一种理想的解决方案.在分解水反应中,涉及四空穴过程的产氧半反应是制约性能的关键步骤,往往需要在半导体表面沉积电催化剂以加速产氧反应动力学.因此,全面理解电催化剂在光电化学分解水体系中的作用至关重要.在目前的产氧电催化剂中,过渡金属羟基氧化物电催化剂(MOOH,M=Fe,Co,Ni)因其环保、廉价、高效以及稳定的特性,已被广泛用于半导体光阳极分解水器件中.而且,MOOH可用简单的电沉积方法沉积在光电极表面,易于大面积制备.然而,电沉积法制备的MOOH具有复杂的结构,对其作用机制的全面理解更加困难.因此,本文以电沉积MOOH修饰的硅基光阳极(n⁺p-Si/SiO_x/Fe/FeOx/MOOH)作为模型,研究了不同电催化剂对硅光阳极光电化学产氧性能的影响.实验发现电催化剂的界面优化在电催化剂修饰的光电极中发挥着重要作用,这是因为优化的界面可以提升界面电荷传输,提供更多的催化反应活性位点以及更高的本征催化活性,从而更有利于光解水性能的提升.该项研究揭示了电催化剂在光解水器件中的作用,并为今后高效光解水器件的设计提供了一定指导.首先在多晶n⁺p-Si基底上热蒸镀了一层30 nm的金属Fe膜,并通过电化学活化将Fe膜表面转换为FeOx得到Fe/FeOx(记作aFe)界面层,然后利用电沉积方法制备MOOH表面修饰层,最终得到n⁺p-Si/SiO_x/aFe:MOOH光阳极.X射线光电子能谱、拉曼光谱以及扫描电子显微镜表面元素成像的表征结果均证实电极表面由于界面层金属Fe元素的掺杂而形成了Fe1-xNixOOH.在模拟太阳光下用于光解水产氧时,n⁺p-Si/SiO_x/aFe:NiOOH电极的起始电位为~1.01 VRHE(相对于可逆氢电极的电势),在1.23 VRHE下的光电流为38.82 mA cm^-2,显著优于n⁺p-Si/SiO_x/aFe、n⁺p-Si/SiO_x/aFe:FeOOH以及n⁺p-Si/SiO_x/aFe:CoOOH三个对比样品,且其稳定性达到75 h.另外,我们发现n⁺p-Si/SiO_x/aFe:MOOH电极的光电化学产氧性能均显著高于n⁺p-Si/SiO_x/aFe电极,且p++-Si/SiO_x/aFe:MOOH的电催化产氧性能也高于p++-Si/SiO_x/MOOH,不仅证明了aFe界面层对Si与MOOH层之间的界面接触作用的有效调控,而且表明双电催化剂体系(aFe:MOOH)的电催化产氧活性高于单电催化剂(MOOH).热力学分析表明,n⁺p-Si/SiO_x/aFe:MOOH光阳极的光电压大小与其光解水产氧性能并不一致,从而排除了热力学因素对性能的关键影响.进一步从塔菲尔斜率、电化学活性表面积和电化学阻抗谱对各电极的动力学进行了分析,证明了动力学因素在上述光阳极产氧性能中的主导作用.同时发现,由于aFe:NiOOH双电催化剂具有更高的本征电催化产氧性能,提供了更多的表面活性位点以及更有效地促进了光生载流子的传输,对动力学的提升效果更显著,从而使n⁺p-Si/SiO_x/aFe:NiOOH光阳极表现出最高的光解水产氧性能.     

Three-dimensional porous photo-thermal fiber felt with salt-resistant property for high efficient solar distillation

The urgent need for fresh water resource is a public issue facing the world. Solar distillation for seawater desalination is a promising freshwater production method. Interfacial solar evaporation systems based on 2D photo-thermal membranes have been widely studied, but salt pollution is one of the main challenges for solar distillation. In order to solve this problem, a hydrophilic three-dimensional (3D) porous photo-thermal fiber felt (PFF) was obtained by one-step method, through a simple polydopamine (PDA) coating method with hydrophobic graphite felt as a substrate. The PFF had a good evaporation rate of 1.48 kg m^?2 h^-1 and its corresponding light-vapor conversion efficiency reached 87.4%. In addition, the PFF exhibited an excellent salt-resistant ability when applied to photo-thermal evaporation of high-salinity seawater with 10 wt% NaCl, owing to its intrinsic 3D macroporous structure for the migration circulation of salt ions. The development of the PFF offers a new route for the exploration of salt-resistant photo-thermal materials and is promising for the practical application of solar distillation.     

Application of multi-buffer layer of (Zn,Mg)O/CdS in Cu2ZnSn(S,Se)4 solar cells

(Zn,Mg)O (ZMO) buffer layer has attracted attention for having the potential to control the conduction band offset of buffer layer and large band-gap (Eg) Cu₂ZnSn(S,Se)₄ (CZTSSe) absorber interface, where the ZMO layer is deposited by the sputtering. However, the solar cell efficiency is decreased with the ZMO layer as compared with the CdS layer. The decrease in conversion efficiency is attributed to the sputtering damage on the absorber and high light reflection from the surfaces of CZTSSe solar cells. To completely suppress the damage, a CdS layer with very thin thickness of 20 nm is inserted between the ZMO layer and the CZTSSe layer. In addition, MgF₂ layers are deposited on CZTSSe solar cells as anti-reflection coating. Ultimately, the solar cell with multi-buffer layer of ZMO/thin-CdS is almost same level as that with the CdS layer. Therefore, the multi-buffer layer can be an appropriate buffer layer of the large-Eg CZTSSe layer.