Growth transition and morphology change in polypropylene

The growth rate of isotactic polypropylene is deduced from microscopic observations during isothermal crystallizations. A change in the growth regime is observed at 138 C and interpreted as a Regime III Regime II transition, according to Hoffman's kinetic theory of polymer crystallization. A Regime II Regime I transition is also theoretically predicted at 155 C, i. e. at a temperature outside the investigated temperature range. The Regime III Regime II transition is related to the positive to negative change in the spherulite birefringence, which is generally attributed to a change in the organization of crystalline lamellae: quadritic arrays of intercrossing lamellae atT _c < 138 C (Regime III) and preferentially radiating lamellae atT _c > 138 C (Regime II). It is suggested that such a morphological change could be interpreted using the concept of non-adjacent re-entry introduced in Hoffman's kinetic theory. This interpretation could also explain the interspherulitic ruptures observed in negative spherulites.     

Two-dimensional separations and behaviour of alkaloids of various polarities on unmodified silica gel in polar and very polar neutral or acidic mobile phases

Summary New separation procedures for alkaloids of similar polarity and structure or of very different polarity and structure, based upon two-dimensional thin-layer chromatography on unmodified silica gel under mild conditions are described. Separation factors and separation mechanisms based on the structure of the bases and mobile phase composition are discussed for some examples of very efficient procedures.Proportions in solvent mixtures are v/v except where otherwise indicated.     

Pure Organic Phase Phenol Biosensor Based on Tyrosinase Entrapped in a Vapor Deposited Titania Sol‐Gel Membrane

A novel amperometric biosensor was constructed for the determination of phenols in pure organic phase. This biosensor was fabricated by immobilizing tyrosinase in a titania sol‐gel membrane which was obtained with a vapor deposition method. This method was facile and avoided the calcination step needed in conventional titania sol‐gel process. The titania sol‐gel membrane could effectively retain the essential water layer around the enzyme molecule needed for maintaining its activity in organic phase. The experimental parameters such as solvent and operating potential were optimized. At ?100 mV this biosensor showed a good amperometric response to phenols in pure chloroform without any mediator and rehydration of the enzyme. For catechol determination the sensor exhibited a fast response of less than 5 seconds. The sensitivity of different phenols was as follows: catechol > phenol > p‐cresol. Additionally, the apparent Michaelis‐Menten constants of the encapsulated tyrosinase to catechol, phenol and p‐cresol were found to be 0.15±0.003, 0.17±0.008 and 0.21±0.004 mM, respectively. The biosensor had also good reproducibility and stability. This work provided a promising platform for the construction of pure organic phase biosensors and the determination of substrates with poor water solubility.     

巯基葡聚糖凝胶分离富集光度法测定镉的研究

研究了在ＴｒｉｔｏｎＸ－１００存在下，新显色剂邻羧基苯基重氮氨基偶氮苯（ＣＤＡＡ）与镉的显色体系，在ｐＨ１０．６的Ｎａ２Ｂ４Ｏ７－ＮａＯＨ体系中，显色反应灵敏度很高。络合物的最大吸收位于５４５ｎｍ处，其摩尔吸光系数为２．２２×１０＾５Ｌ·ｍｏｌ＾－１·ｃｍ＾－１。镉含量在０￣１２μｇ／２５ｍＬ符合比耳定律。将该体系用于巯基葡聚糖凝胶分离富集－光度法测水样中微量镉，结果令人满意。     

Dynamics of the formation of two-dimensional ordered structures

The growth of ordered domains in lattice gas models, which occurs after the system is quenched from infinite temperature to a state below the critical temperatureT _c, is studied by Monte Carlo simulation. For a square lattice with repulsion between nearest and next-nearest neighbors, which in equilibrium exhibits fourfold degenerate (2×1) superstructures, the time-dependent energy E(t), domain size L(t), and structure functionS(q, t) are obtained, both for Glauber dynamics (no conservation law) and the case with conserved density (Kawasaki dynamics). At late times the energy excess and halfwidth of the structure factor decrease proportional tot ^–x, whileL(t) t ^x, where the exponent x=1/2 for Glauber dynamics and x1/3 for Kawasaki dynamics. In addition, the structure factor satisfies a scaling lawS(k,t)=t ^2xS(kt^x). The smaller exponent for the conserved density case is traced back to the excess density contained in the walls between ordered domains which must be redistributed during growth. Quenches toT>T _c, T=T_c (where we estimate dynamic critical exponents) andT=0 are also considered. In the latter case, the system becomes frozen in a glasslike domain pattern far from equilibrium when using Kawasaki dynamics. The generalization of our results to other lattices and structures also is briefly discussed.     

In-gel deglycosylation of sodiumdodecyl sulfate polyacrylamide gel electrophoresis-separated glycoproteins for carbohydrate estimation by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Mass determination by mass spectrometric methods (electrospray ionization mass spectrometry (ESI-MS), matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS)) of sodiumdodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE)-separated proteins is a well known procedure and reliable protocols are available. In our efforts to use the established methods to determine the molecular mass of the disulfide bridged, heterodimeric glycoprotein GP3 and to determine the carbohydrate content of each protein subunit we developed an in-gel chemical deglycosylation method. For this purpose we established experimental conditions that allow maximum extraction of the high molecular mass protein subunits and developed a routine method to apply the HF-pyridine deglycosylation protocol to proteins isolated from polyacrylamide gel pieces. The novel protocol and extraction procedure described can be used to analyze O-glycosylated proteins up to 150 kDa after SDS-PAGE separation.     

Reaction of carboxamide with Cu2Oisonitrile complex; formation of a new chelated copper(I) complex

Reaction of carboxamides with Cu₂O in the presence of t-butyl isocyanide gave new chelated copper(I) complexes, which probably are formed by the insertion of t-butyl isocyanide into the coppernitrogen bond of copper(I) amide isonitrile complexes, which were initially produced from the carboxamides and Cu₂Ot-butyl isocyanide complex. The same chelated copper(I) complexes were prepared more readily by the reaction of the corresponding N-trimethylsilyl-carboxamides with Cu₂Ot-butyl isocyanide complex. Reactions of the copper(I) complexes thus obtained with alkylating agents, such as alkyl halides, alkyl tosylates and triethyloxonium tetrafluoroborate, also were described.     

Properties of Ce–Zr–La–O nano-system with ruthenium modified surface

Structural peculiarities of Ce–Zr–La–O and Ce–Zr–La–O/Ru samples in mean of catalytic properties are compared. The samples (Ce:Zr = 1:1, La = 10÷30 mol.%, Ru = 1.5 wt.%) were obtained by sol–gel method (X-samples) and co-precipitation (P-samples). It is shown that Ce_0.45Zr_0.45La_0.1O_2−δ/Ru X-samples are characterized by high thermal stability and the highest catalytic activity in partial methane oxidation reaction. According to XRD, BET, FTIR, EPR and XPS data it is concluded that the difference in the samples catalytic activity is caused by various disposition of Ru-containing phase on the support surface. The distinction in the dimension of Ru-containing particles (3D or 2D) is conditioned by structural peculiarities of Ce_0.45Zr_0.45La_0.1O_2−δ and Ce_0.35Zr_0.35La_0.3O_2−δ P- and X-samples.     

Advanced Current Collectors for Alkali Metal Anodes

High-energy-density batteries are in urgent need to solve the ever-increasing energy storage demand for portable electronic devices, electric vehicles, and renewable solar and wind energy systems. Alkali metals, typically lithium(Li), sodium(Na) and potassium(K), are considered as the promising anode materials owing to their low electrochemical potential, low density, and high theoretical gravimetric capacities. However, the problem of dendrite growth of alkali metals during their plating/stripping process will lead to low Coulombic efficiencies, a short lifespan and huge volume expansion, eventually hindering their practical commercialization. To resolve this issue, a very effective approach is engineering the anodes on structured current collectors. This review summarizes the development of the alkali metal batteries and discusses the recent advances in rational design of anode current collectors. First, the challenges and strategies of suppressing alkali-metal dendrite growth are presented. Then the special attention is paid to the novel current collector design for dendrite-free alkali metal anodes. Finally, we give conclusions and perspective on the current challenges and future research directions toward advanced anode current collectors for alkali metal batteries.     

Influence of silica gel pretreatment and bonding technique on PAH selectivity of octadecyl bonded phases

Summary The effect of silica gel pretreatment and of different bonding techniques, on the chromatographic properties of octadecyl bonded phases is described. The experiments show that a monomeric octadecyl bonded phase, prepared from silica gel that has not been treated before bonding, has a poor selectivity towards polycyclic aromatic hydrocarbons (PAHs) and shows high adsorption of basic components. Silica gel treatment before the bonding of the monofunctional silane does not give a substantial improvement. Polymeric phases on the other hand show a much better PAH selectivity and a lower adsorptivity towards basic components. Further improvement can be achieved with the polymeric modification if silica gel treatment is carried out before bonding.