Direct and simultaneous voltammetric analysis of heavy metals in tap water samples at Assiut city: an approach to improve the analysis time for nickel and cobalt determination at mercury film electrode

Tap water samples (Assiut city, lie in the middle north of upper Egypt, approx. 370 km from Cairo, January-March, 2002) were taken from the eight sampling sites of different locations at Assiut city. The samples are analyzed to determine the total content of cadmium, copper, lead and zinc by differential pulse anodic stripping voltammetry (DPASV) while nickel and cobalt are determined by a new simple differential pulse adsorptive stripping voltammetry (DPAdSV), using dimethylglyoxime (DMG) as the complexing agent. This method uses sodium sulfite as the supporting electrolyte, which facilitates the removal of oxygen interference without the traditional necessity of purging with inert gas. The effect of various parameters was studied using DPASV (for Cd, Pb, Cu and Zn) and AdSV (for Ni and Co) methods. Subsequently, under the so found experimental conditions, the stability of calibration curves and the detection limits (μg/l) have been determined. The data achieved (for all metals utility) are comparable to those measured by the graphite furnace atomic absorption spectrophotometric (GF-AAS) method. The effects of the interferences between these metal ions have been investigated. Moreover, the effect of storage was discussed and the obtained results were compared favorably with standard official methods. Statistical analysis of the database exhibits applicability and the accuracy of the techniques. The results obtained from the two techniques (Voltammetry and GF-AAS) are in very good agreements in the most tap water samples.     

Determination of linuron in soil by stripping voltammetry with a carbon fiber microelectrode

A carbon fiber microelectrode was used for the electroanalytical determination of Linuron (LIN) in soil extracts. The microelectrode was subjected to an electrochemical pretreatment in order to improve the herbicide adsorption on the electrode surface. With this preconcentration step, detection limits of 80 ng ml⁻¹ and determination limits of 260 ng ml⁻¹ were reached. Optimal conditions with respect to accumulation time and potential, scan rate and pH were established. The LIN was determined in a soil sample with the method proposed and the results found were comparable to those obtained by HPLC.     

气相色谱-质谱法分析土壤中神经性毒剂及糜烂性毒剂

建立了土壤中神经性毒剂及糜烂性毒剂GC—MS-SIM分析法，对土壤中6种毒剂的样品制备和二步萃取方法进行了研究；该法的回收率在80．7％～89．5％，6种毒剂在0．5～10mg/L范围内毒剂质量浓度和峰面积有良好的线性相关，方法检出限为4～20ng／g，该法适用于痕量化学战剂分析。     

密封罐微波消化法序列ICP-AES测定环境试样中多元素

本文采用密闭罐微波消化方法快速分解生物、土壤、沉积物等环境样品。按样品性质,分别采用HNO3/H_2O_2或HNO_3/H_2O_2/HF在聚四氟乙稀密闭罐中于500W微波功率分解0.1～0.2g样品2～3min,溶液(或在其中加入10ml硼酸饱和溶液)稀释至2.5～5.0ml后,直接用序列ICP-AES法测定。方法准确度经分析6个生物、土壤、沉积物标准参考物质验证,10个元素的均值均与定值吻合。     

Measurement of labile Cu in soil using stable isotope dilution and isotope ratio analysis by ICP-MS

Isotope dilution is a useful technique to measure the labile metal pool, which is the amount of metal in soil in rapid equilibrium (<7 days) with the soil solution. This is normally performed by equilibrating soil with a metal isotope, and sampling the labile metal pool by using an extraction (E value), or by growing plants (L value). For Cu, this procedure is problematic for E values, and impossible for L values, due to the short half-life of the ⁶⁴Cu radioisotope (12.4 h), which makes access and handling very difficult. We therefore developed a technique using enriched ⁶⁵Cu stable isotope and measurement of ⁶³Cu/⁶⁵Cu ratios by quadrupole inductively coupled plasma mass spectrometry (ICP-MS) to measure labile pools of Cu in soils using E value techniques. Mass spectral interferences in detection of ⁶³Cu/⁶⁵Cu ratios in soil extracts were found to be minimal. Isotope ratios determined by quadrupole ICP-MS compared well to those determined by high-resolution (magnetic sector) ICP-MS. E values determined using the stable isotope technique compared well to those determined using the radioisotope for both uncontaminated and Cu-contaminated soils.     

Molar mass distributions by gradient liquid chromatography: predicting and tailoring selectivity

Interactive liquid chromatography (iLC) for polymer analysis is usually applied to the characterisation of distributions other than molar mass. In particular, its use for the determination of chemical-composition, functionality-type and tacticity distributions has been demonstrated. The application of iLC for the determination of molar mass distributions (MMDs), however, has not yet been fully explored. An expanded version of the reversed-phase liquid chromatography model has been developed to describe and predict how the retention behaviour of polydisperse polystyrene samples changes with molar mass. The relationship between molar mass and the parameters of the model has been investigated in some detail and non-linear correlations were found. From the model and the relationships between the model parameters and molar mass, calibration curves (retention time versus molar mass) were constructed to predict changes in chromatographic selectivity across a given molar mass range. These calibration curves were compared to experimentally obtained curves and, in most cases, excellent agreement was found. The dramatic enhancement in selectivity that can be obtained with iLC in comparison to size-exclusion chromatography (SEC) was illustrated by measuring matrix-assisted laser desorption ionisation (MALDI) MS spectra of fractions collected during a gradient-LC separation. In the low-molar mass range, essentially monodisperse fractions were obtained. Calibration curves, predicted by the model and validated experimentally using narrow-dispersity standards and MALDI-MS spectra of fractions, were used to determine the molar mass distribution of some narrowly distributed polystyrene samples. Molar mass distributions for such standards were found to be somewhat lower than the values reported by the manufacturers. The results also deviated from those obtained by MALDI-MS.     

Nutritional parameters of commercially available milk samples by FTIR and chemometric techniques

A chemometric study on the prediction of the main nutritional aspects of milk has been carried out by using fourier transform infrared spectroscopy (FTIR) attenuated total reflectance (ATR) measurements of commercially available milk samples of different types. Whole, semi and skimmed milks, enriched or not with calcium, vitamins or modified by alteration of lipid or sugar composition were considered. After evaluating different strategies for data acquisition and ATR cleaning between samples, hierarchical cluster analysis (HCA) was carried out for classification of samples in order to choose the calibration set. The prediction capabilities of partial least squares (PLS) data treatment were evaluated in order to obtain information about total fat, total protein, total carbohydrates (CH), calories and calcium. On using the mean square error of cross-validation and prediction as control variables, a critical evaluation were made about the calibration set to be used, the spectral range to be considered and the data treatment (PLS-1 or PLS-2) to be performed. By selecting a calibration set of 33 samples the properties of 48 samples were predicted with relative precision of triplicates of 0.062, 0.040 and 0.039% w/v for total fat, protein and carbohydrates, and 0.66 kcal/100 ml for calories, and 2.1 mg of Ca/100 ml. The mean difference (d_x−y) between predicted and actual values and standard deviation of mean differences (s_x−y), were of 0.06 (0.38), 0.03 (0.18) and −0.15 (0.41), being s_x−y values between brackets, for total fat, proteins and carbohydrates, 0.06 (3.8) kcal/100 ml for calories and −4.5 (9) mg/100 ml for calcium.The sensitivity and selectivity of the methodology developed were evaluated on terms of the net analyte signal. Selectivity factors ranging from 2 to 7.6% have been calculated for the five parameters considered.     

Insight into the extractability of metals from soils using an implementation of the linear adsorption isotherm model

This paper deals with an often overlooked artifact in sequential and single extraction of metals from soils, viz. the volume to mass (V/m) ratio as a potential source for inadequate extraction yields. We offer a theoretical framework to get a grip on this intricate parameter and came up with a model based on a linear adsorption isotherm to derive the correct maximal metal extractability for a certain extractant. We verified the model experimentally using 0.1 mol l⁻¹ nitric acid for extraction of seven metals (Cr, Co, Cu, Cd, Pb, Ni and Zn) from an urban soil sample, and concluded that commonly used V/m ratios in the range of 10-40 ml g⁻¹ may give as much as 50% too low extraction yields. Thus, a strong caveat is in place as to be very critical what V/m ratios to use and preferably apply the model derived to obtain the correct maximal extractability using a variable V/m ratio method.     

Comparison of slurry sampling and microwave-assisted digestion for calcium, magnesium, iron, copper and zinc determination in fish tissue samples by flame atomic absorption spectrometry

The development of a slurry sampling method for the determination of calcium, copper, iron, magnesium and zinc in fish tissue samples by flame atomic absorption spectrometry is described. In comparison with microwave-assisted digestion, the proposed method is simple, requires short time and eliminates total sample dissolution before analysis. Suspension medium was optimized for each analyte to obtain quantitative recoveries from fish tissue samples without matrix interferences. Nevertheless, iron recoveries higher than 46% were not found. Treatment of samples slurried in nitric acid by microwave irradiation for 15-30 s at 75-285 W permitted to achieve efficient recoveries for calcium, iron, magnesium and zinc. Further improvement in the matrix effects for iron determination was accomplished by the use of an additional step of short microwave-assisted suspension treatment. However, standard addition method was required for calcium and copper determination, being necessary hydrochloric acid as suspension medium for the last one. Although copper could not be determined in the certified reference material using microwave-assisted digestion, the accuracy of the slurry sampling method was verified for all the investigated analytes. Detection limits were 22.8 ± 8.0, 0.884 ± 0.092, 5.07 ± 0.76, 35.5 ± 0.7 and 1.17 ± 0.04 μg g⁻¹ for calcium, copper, iron, magnesium and zinc, respectively. The standard deviations obtained using slurry sampling method and microwave-assisted digestion were not significantly different, and the mean relative standard deviation of the over-all method (n = 3) of the slurry sampling method for different concentration levels was below 12%.     

土壤中绿黄隆残留量分析方法的研究

本文确立了土壤中绿黄隆残留量的间接气相色谱分析方法，用０．１５ｍｏｌ／Ｌ ＮａＨＣＯ３提取土样，二氯甲烷洗涤初步纯化后，在水浴上加热水解，再用二氯甲烷萃取，弗罗里硅土柱净化，最后用气相色谱－电子捕获检测器检测水解产物邻氯苯磺酰胺。土壤中添加回收率７８．５％－９０．８％，检测极限０．３ｎｇ／ｇ。