噪声模态单元预判的经验模态分解脉冲星信号消噪

为了改善脉冲星辐射脉冲信号的消噪效果, 提出了一种基于噪声模态单元预判的经验模态分解(EMD) 消噪声方法. 该方法首先利用EMD将含噪辐射脉冲信号分解为一组内蕴模态函数(IMF), 根据IMF系数的统计特性采用局部均方误差准则进行噪声模态单元预判, 并将噪声模态单元置零; 然后对噪声模态单元预判处理后的IMF以模态单元为基本单位进行最优比例萎缩消噪, 从而达到抑制噪声、保留信号的目的. 实验结果表明: 与Sure Shrink小波阈值法、Bayes Shrink小波阈值法和EMD模态单元比例萎缩法相比, 基于噪声模态单元预判的EMD消噪方法可以更有效地去除脉冲辐射信号中的噪声, 同时更好地保留信号突变处的细节信息特征, 在信噪比、 均方误差、峰值相对误差、峰位误差和相位误差等方面都有一定程度的改善. 关键词： 脉冲星信号消噪 经验模态分解 噪声模态单元预判 局部均方误差     

Design and characterization of guided mode resonance filters with the improved structure for facile fabrication

In this study, a guided mode resonance filter with the improved structure for facile fabrication is designed; the properties of the designed filters are simulated by rigorous coupled wave analysis. It is found that the resonance wavelength and spectral linewidth are slightly increased with the increasing of the grating thickness, and seldom changed with the thickness of the grating filling factor, as the parameter error of the grating thickness and the grating filling factor are deviated from the designed value by ±10%, respectively, which are very favorable for simplifying preparation process of the GMR filter.     

The single-longitudinal-mode operation of a ridge waveguide laser based on two-dimensional photonic crystals

An electrically driven, single-longitudinal-mode GaAs based photonic crystal (PC) ridge waveguide (RWG) laser emitting at around 850 nm is demonstrated. The single-longitudinal-mode lasing characteristic is achieved by introducing the PC to the RWG laser. The triangle PC is etched on both sides of the ridge by photolithography and inductive coupled plasma (ICP) etching. The lasing spectra of the RWG lasers with and without the PC are studied, and the result shows that the PC purifies the longitudinal mode. The power per facet versus current and current-voltage characteristics have also been studied and compared.     

Adsorption of CO and C2H4 on Rh-loaded thin-film dysprosium oxide

A dysprosium oxide thin film was deposited on Ru(0 0 0 1) by vapor depositing Dy in 2 × 10⁻⁷ torr O₂ while the Ru was at 700 K. The film was ca. 5 nm thick and produced a p(1.4 × 1.4) LEED pattern relative to the Ru(0 0 0 1) substrate. The adsorption and reaction of CO and C₂H₄ adsorbed on Rh supported on the Dy₂O₃ film were studied by TPD and SXPS. The CO initially reacted with loosely bound oxygen in the substrate to produce CO₂. After the loosely bound oxygen was removed, the CO adsorbed non-dissociatively in a manner similar to what is seen on Rh(1 1 1). C₂H₄ adsorbed on the Rh particles and underwent progressive dehydrogenation to produce H₂ during TPD. The C from the C₂H₄ reacted with the O in Dy₂O₃ to produce CO. CO dissociation on the Rh particles could be promoted by treating the Dy₂O₃ with C₂H₄ before CO exposure.     

Dominant modes of submerged thin cylindrical shells

The relationship between the dominant mode of the submerged thin cylindrical shell and the flexural wave velocity is investigated. The natural frequency corresponding to the vibration mode is obtained as the solution of characteristic equation of thin cylindrical shell. However, it is difficult to estimate the dominant mode, especially if two or more vibration modes are involved. To estimate the dominant mode of a thin shell in vacuo, the concept of “modified bending stiffness” has been introduced. In this paper, the concept of modified bending stiffness is extended to estimate the dominant mode of a submerged thin cylindrical shell. The dominant mode of a submerged thin cylindrical shell is theoretically discriminated from the other mode based on the smallness of the modified bending stiffness of the submerged shell. The validity of our theory is confirmed by a good agreement between theoretical and experimental results on flexural wave velocity.     

依赖强度耦合三光子过程下运动原子最佳熵压缩态的制备

为了研究三光子过程中原子与相干态耦合量子体系信息熵压缩随时间演化规律及原子最佳信息熵压缩态的制备,我们采用全量子理论,推导出运动原子与单模简并三光子依赖强度耦合量子体系的精确解;理论上给出制备原子最佳信息熵压缩态的充分及必要条件,并进行了数值模拟验证。研究结果表明：控制相干态场与原子作用时间,切断相干态场与原子的纠缠,选择二能级原子处于等权重相干叠加态,适当选取相干态场与原子的初始位相,可以制备出原子最佳量子信息熵压缩态;调节光腔中场模结构参量,能够得到连续的量子信息熵压缩态。该研究结果在多光子过程低噪声量子信息处理中具有一定意义。     

Formation and magnetic properties of Co–Fe-based bulk metallic glasses with supercooled liquid region

A new Co–Fe-based ferromagnetic bulk metallic glass (BMG) was synthesized by copper mould casting method. The thermal stability and crystallization processes were investigated by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The soft magnetic behavior was studied by DC magnetic measurements. The high glass formation ability was interpreted in terms of the effective suppression of nucleation and growth of the intermetallic compounds which appear in the multicomponent system during solidification. The high thermal stability indicates that the new Co–Fe-based BMG could be used as high-temperature magnetic material. The low coercivity which was as low as 8 A/m for the as-cast sample was found in the Co–Fe-based metallic glass cylinder with a diameter of 1.5 mm.     

小波时-频变换的高强钢丝弹性波传播模态分析

超声导波是近年来桥梁拉索无损检测研究的重要方法之一。针对弹性波在高强钢丝介质中传播的多模态频散问题,采用单点时域波形的小波时频变换进行混叠信号的模态识别分离。通过数值求解Pochhammer频率超越方程,计算得到0~1.5 MHz范围内纵向导波模态理论频散曲线;采用有限元模拟半波正弦脉冲激励导波在钢丝中传播过程,由小波时-频变换得到导波模态分布,并进行了不同腐蚀程度钢丝实验对比分析。结果表明,经小波时-频变换得到的第1、2、3阶纵向导波模态与理论值对应吻合,单点时域波形的小波时-频变换结果能够有效识别高强钢丝中的导波模态;钢丝在无腐蚀状态下,一阶纵向导波模态能量占比达57.74%,随腐蚀程度增加,能量更为集中到一阶纵波模态,二阶模态能量逐渐减小。     

一种新型可调谐锁模光纤激光器

利用法布里-珀罗腔的激光二极管作为调制器件，实现环形腔光纤激光器的主动锁模。并利用法布里-珀罗腔的激光二极管的多纵模特性，把激光二极管当作一梳状滤波器，通过偏振控制器来调整入射到激光二极管内光的偏振态，同时均衡腔内增益，得到波长大范围可调谐的锁模激光，其脉冲宽度约为48ps，脉冲重复速率2GHz。