Indirect Determination of Sulfide by Cold Vapor Atomic Absorption Spectrometry

A method for the determination of sulfide based on its interference with the determination of Hg by cold vapor atomic absorption spectrometry is described. The decrease in mercury absorbance at 253.7nm is proportional to the concentration of sulfide over the range of 10–320ngmL^–1. The limit of detection was found to be 7ngmL^–1 and the relative standard deviation (R.S.D.) for the determination of different concentrations of sulfide was in the range of 1.8–2.2%. This method was applied to the determination of sulfide in whole human blood after gas-phase separation.     

Enantioselective Oxidation of Sulfides Catalyzed by Chiral MoV and CuII Complexes of Catechol-Appended β-Cyclodextrin Derivatives in Water

The two modified β-cyclodextrin (β-CD) derivatives having catechol-type ligand (2,3- and 3,4-dihydroxy groups on the benzoate ring) were synthesized. The chiral catalytic activity of their Mo^V and Cu^II complexes was examined in the asymmetric oxidation of aromatic sulfides using hydrogen peroxide in water (pH 6.0). The oxidation with the Mo^V complexes of two β-CD derivatives were more accelerated than that with the Cu^II complexes. The sign of the optical rotation of the sulfoxides obtained in the above two cases showed the opposite configuration in the oxidation of the same sulfide. The difference of the enantioselectivity appeared also between the two complexes of the 2,3- and 3,4-dihydroxybenzoate derivatives with the same metal ion. While the use of the Mo^V complexes with the catechol derivatives yielded the sulfoxides with 35–65% ee, the use of the Cu^II complexes gave the products with the␣opposite configuration at 26–52% ee. The chiral induction in the oxidation, observed conversely between the␣catalysts, was reflected on the chiral conformation of the respective metal catalysts, showed in Induced Circular Dichroism (ICD) spectra. The highest optical yield, 65%, was observed in the oxidation of butyl phenyl sulfide using the catalytic amount (0.1 equiv) of the Mo^V complex with mono-6-O-(3,4-dihydroxybenzoyl)-β-CD. The reaction gave predominantly the (S)-sulfoxide in 95% chemical yield.     

Specific heat and neutron diffraction study on quaternary sulfides BaNd2CoS5 and BaNd2ZnS5

Magnetic and electrical properties are investigated for quaternary neodymium sulfides BaNd₂TS₅ (T=Co, Zn) through the specific heat, neutron diffraction, and electrical conductivity measurements. Their electrical conductivities show semiconductive behavior, which follows the Arrhenius temperature dependence with the activation energy of E_a=1.46 eV for BaNd₂ZnS₅ and E_a=1.19 eV for BaNd₂CoS₅. The specific heat of BaNd₂ZnS₅ has a λ-type anomaly at 2.8 K due to the antiferromagnetic ordering of the Nd³⁺ moments and a Schottky-type anomaly at around 60 K, which results from the crystal field splitting of the ⁴I_9/2 ground state of the Nd³⁺ ion. The specific heat of BaNd₂CoS₅ shows two λ-type anomalies at 5.7 K due to the antiferromagnetic ordering of Nd³⁺ and at 58 K due to the antiferromagnetic ordering of Co²⁺. The latter overlaps with the Schottky-type anomaly due to the crystal field splitting of the Nd³⁺ ion. Neutron diffraction measurements for BaNd₂CoS₅ show that a magnetic arrangement of the Co²⁺ moments has a collinear antiferromagnetic structure, while that of the Nd³⁺ moments has a noncollinear one.     

Preparation and photocatalytic properties of silica-supported fine CdS powders

Summary Silica-supported cadmium sulfide, highly active in hydrogen photogeneration from water-methanol-KOH solution, was prepared by sulfidation of Cd²⁺-impregnated SiO₂. The samples consisted of colloidal-size hexagonal crystallites of CdS on amorphous SiO₂. A blue shift of a light absorption edge was observed for the samples with lower CdS content.

---

Herstellung und photokatalytische Aktivität von feinen CdS-Pulvern auf SiO₂

Zusammenfassung Es wurde Cadmiumsulfid auf Kieselgel durch Sulfidierung von Cd²⁺-imprägniertem SiO₂ hergestellt, das eine außerordentliche Aktivität bei der Wasserstoff-Photogenerierung aus Wasser-Methanol-KOH-Lösungen zeigte. Der Katalysator bestand aus hexagonalen CdS-Kristalliten von kolloidalen Ausmaßen auf amorphem SiO₂. An Proben mit geringerem CdS-Gehalt wurde eine Blauverschiebung der Lichtabsorption an der Absorptionskante beobachtet.

     

Photoinduced Electron Transfer between CdS and CdTe Nanoparticles in Colloidal Solutions

The photochemical behavior of solutions containing a mixture of CdS and CdTe nanoparticles under pulsed irradiation conditions was investigated. It was shown that electron transfer from the CdS particles to the CdTe nanoparticles occurs during the photoexcitation of such systems. The effectiveness of the process is increased with increase in the size of the CdTe nanoparticles. Such behavior is due to decrease in the potential of the CdTe conduction band with increase in the size of the nanoparticles as a result of the appearance of quantum-dimensional effects.     

Determination of DNA using sodium 9,10-anthraquinone-2-sulfonate as an in situ photochemical fluorescence probe

An in situ photochemical fluorescence probe method for the determination of DNA with sodium 9,10-anthraquinone-2-sulfonate (AQS) as a photochemical fluorescence probe was developed. It was based on the conversion of AQS into an intensively fluorescent product by irradiating with UV radiation. The photochemical reaction is retarded by DNA. The determination can be carried out by measuring the fluorescence intensity at a fixed time. The calibration graph was linear in the range 0–80 ng ml⁻¹ calf thymus (CT) DNA (r = 0.9991), the limit of detection was 3.2 ng ml⁻¹ CT DNA (n = 9). The kinetic behaviour of the photochemical reaction and the effects of experimental conditions were investigated and discussed in detail. The results of absorption spectra and competitive binding experiments suggested the interaction between AQS and DNA to be intercalative.     

Group 6-group 10 heterobimetallic complexes with sulfur ligands

Complexes that contain both a group 6 group 10 metal combination and a sulfur bound ligand form a growing set of species. Their chemistry is discussed and reviewed. Ligands that bind to such heterobimetallic molecules most commonly are S^2– and SR^– species. Metal-metal bonded complexes, and compounds where metal-metal interactions are minimal are both discussed. The structural parameters for many of the crystallographically characterized complexes are tabulated.     

几种热塑性特种工程塑料的热分析研究

聚芳醚和聚芳硫醚两类聚合物都为热塑性的耐高温特种高分子材料 ,由于它们的加工性好、加工成型效率高 ,受到了世界各国的高度重视。这两类聚合物在结构上有许多相似之处 ,如它们的主链都含苯环、酮基或砜基 ,而聚芳醚类聚合物的柔性基团为醚键 ,聚芳硫醚类聚合物的柔性基团为硫醚键 ,但由于氧和硫在元素周期表中属于同一族元素 ,原子结构仍然相似 ,因而在某些方面具有一定的可比性。研究它们的性能差异对于改进聚合物性能以及进行进一步的结构设计将有一定的帮助。在这两类聚合物中 ,国内已商品化生产的品种有ＰＥＥＫ、ＰＥＳ和ＰＰＳ ,有…     

Are the pyrazolines formed from the reaction of [60]fullerene with alkyl diazoacetates unstable?

[60]Fullerene-fused pyrazolines 1 were prepared by the reaction of C₆₀ with alky diazoacetates under the solid-state high-speed vibration milling conditions as well as in toluene solution. Pyrazolines 1 were stable in refluxing toluene and its thermolysis process in 1,2-dichlorobenzene was investigated, the decomposition rates and activation energies of pyrazolines 1 were obtained. The current work demonstrated that the liquid-phase reaction of C₆₀ with alkyl diazoacetates undergoes via 1,3-dipolar cycloaddition pathway at room temperature, or proceeds via carbene mechanism at a temperature of refluxing toluene, thus clarifies the previous ambiguity of its reaction mechanism.     

Synthesis and characterization of poly(ethylene oxide-co-ethylene sulfone)s and their precursors: Poly(ethylene oxide-co-ethylene sulfide)s

Three poly(ethylene oxide-co-ethylene sulfide)s with oxygen to sulfur ratios of 2/1, 2/2, and 1/2 were prepared by phase-transfer catalyzed polycondensations of (1) sodium sulfide and 1,2-bis (2-chloroethoxy)ethane, (2) 1,2-ethanedithiol and 1,2-bis(2-chloroethoxy)ethane, and (3) 1,2-ethanedithiol and 2-chloroethyl ether, respectively. A buffered solution with pH between the pK_a of the monothiol (RSH) and the pK_a2 of the dithiol (HS–R–SH), or H₂S, was needed to obtain high molecular weight polymers, which suggests that nucleophiles transfer and react as monoanions rather than dianions. These poly(ethylene oxide-co-ethylene sulfide)s were oxidized completely to poly(ethylene oxide-co-ethylene sulfone)s using 3-chloroperoxybenzoic acid as oxidant. Both the final polymers and the precursors have regular sequenced structures and are semicrystalline. As expected, their glass transition temperatures and melting points increase and solubilities decrease with the decrease of ether oxygen to sulfur ratio. © 1994 John Wiley & Sons, Inc.