Voltammetric Behavior of Arsenic(III) in the Presence of Sodium Diethyl Dithiocarbamate and Its Determination in Water and Highly Saline Samples by Adsorptive Stripping Voltammetry

This paper describes the voltammetric behavior of As(III) at the hanging mercury drop electrode (HMDE) in the presence of sodium diethyl dithiocarbamate (SDDC) and a new voltammetric method for the determination of As(III) at trace levels. The method is based on the adsorptive deposition of a As(III) complex with SDDC at ?0.45 V (vs. Ag/AgCl) on the HMDE in acidic medium of 0.01 mol L^?1 HCl (pH 2.0) and its cathodic stripping during the potential scan (100 mV s^?1). The linear range for the determination of As(III) in the presence of SDDC (4 μmol L^?1) in water samples was between 1 and 10 μg L^?1 for a deposition time of 300 s (r=0.994) and between 10 and 100 μg L^?1 for a deposition time of 60 s (r=0.999). For the determination of As(III) in dialysis concentrate samples, the linear range was between 5 and 25 μg L^?1 for a deposition time of 180 s (r=0.992) and between 10 and 100 μg L^?1 for a deposition time of 60 s (r=0.996). Detection limits of 0.3 and 2.2 μg L^?1 in water and dialysis concentrate samples were calculated for the method using a deposition time of 300 and 180 s, respectively. Recovery values between 93.0 and 110.0% for As(III) added to deionized, mineral, seawater (synthetic and real) and dialysis concentrate samples prove the satisfactory accuracy and applicability of the procedure.     

Crystal structure of sodium potassium zinc diphosphate NaKZnP2O7

Single crystals of NaKZnP₂O₇ were grown, and their crystal structure was determined by X-ray diffraction (space group P2₁/n, a = 12.585(5) Å, b = 7.277(5) Å, c = 7.428(5) Å, β = 90.00(5)°, Z = 4, 1916 F(hkl), R ₁ = 0.0461). The structure contains a 3D tetrahedral zinc phosphate framework with a system of intersecting channels running along the b and c axes. The sodium and potassium atoms are coordinated to six and seven oxygen atoms, respectively, and reside inside these channels; the potassium cations, which are larger than the sodium cations, are located at channel intersections.     

碳酸氢铵制纯碱的研究

本文对“中间盐”复分解制碱法进行了研究。“中间盐”的加入不能使两个三盐共饱和点在干盐图上发生明显的移动,但能使三盐介稳平衡点的介稳期延长,从而使得用碳酸氢铵和食盐通过复分解制碱成为可能。     

NaCl(或KCl)-CH3OH-H2O体系的摩尔电导

CHaOH－HzO体系具有非常特殊的性质，同时在工业生产及临床治疗方面有着十分广泛的应用，文献中有大量地从不同角度就这类体系进行研究的报道．然而，就N3CI及KCI－CH30H－H20体系的电导研究而言，文献中仅有关干KCI－CH30H－H20（间隔20％CH30H）的部分研究工作．作为全面、系     

Biotinylation: A nonradioactive method for the identification of cell surface antigens in immunoprecipitates

A nonradioactive method was employed to detect different cell membrane antigens on human polymorphonuclear granulocytes, monocytes and platelets. We compared the reactivity of one monoclonal antibody, N1III10, assumed to be FcγRII-specific by functional assays, with other well-characterized monoclonal antibodies and human sera. Intact cells were incubated with biotin N-hydroxysulfosuccinimide ester which preferentially reacts with lysine residues in polypeptides. Biotin-labeled cells were lysed and the antigen was isolated from the cell lysate by immunoprecipitation with the antibody bound to Protein A-Sepharose. The precipitates were separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, transferred onto nitrocellulose membrane, and visualized by a streptavidin-alkaline phosphatase system with a suitable substrate. Using this biotin-labeling system we could show that N1III10 detects a 40 kDa antigen on monocytes and platelets, comparable to that expected of FcγRII monoclonal antibodies.     

超临界NaCl水溶液的分子动力学模拟

采用分子动力学模拟的方法对超临界NaCl水溶液的微观结构进行了研究.模拟发现在所研究超临界条件下,密度的变化比温度的变化对超临界NaCl水溶液的微观结构影响更大.温度及密度对Cl－ H2O径向分布函数的影响比对Na＋ H2O径向分布函数的影响要大.超临界条件下,各gNa＋－Cl－在0.261 nm处出现峰值,表明Na＋、Cl－之间发生了离子的缔合.超临界条件下,随温度增加,缔合作用增强；随密度增加,缔合作用减弱.本文工作为建立可适用于超临界条件下的电解质热力学模型提供了依据.     

Physico-chemical and thermochemical studies of the hydrolytic conversion of amorphous tricalcium phosphate into apatite

The conversion of amorphous tricalcium phosphate with different hydration ratio into apatite in water at 25 °C has been studied by microcalorimetry and several physical-chemical methods. The hydrolytic transformation was dominated by two strong exothermic events. A fast, relatively weak, wetting process and a very slow but strong heat release assigned to a slow internal rehydration and the crystallization of the amorphous phase into an apatite. The exothermic phenomenon related to the rehydration exceeded the crystalline transformation enthalpy. Rehydration occurred before the conversion of the amorphous phase into apatite and determined the advancement of the hydrolytic reaction. The apatitic phases formed evolved slightly with time after their formation. The crystallinity increased whereas the amount of HPO₄²⁻ ion decreased. These data allow a better understanding of the behavior of biomaterials involving amorphous phases such as hydroxyapatite plasma-sprayed coatings.     

Easy saponification by metal silanolates: application in SPPS and in (S)-5-hydroxynorvaline preparation

Alkali metal trimethylsilanolates, TMSO⁻, M⁺, has been used for efficient conversion of methyl esters into their corresponding anhydrous acid salts under mild non-aqueous conditions. This strategy has been applied to SPPS for the preparation of neurotoxin cyclic analogues and in (S)-5-hydroxynorvaline synthesis.     

Practical synthesis of 1-deoxy-d-xylulose and 1-deoxy-d-xylulose 5-phosphate allowing deuterium labelling

An optimised gram scale synthesis allows the production of 1-deoxy-d-xylulose and 1-deoxy-d-xylulose 5-phosphate with possible deuterium labelling at C-5. Such substrates are required for investigations on the mevalonate-independent 2-C-methyl-d-erythritol 4-phosphate pathway for isoprenoid biosynthesis in bacteria and chloroplasts of phototrophic eukaryotes and for the biosynthesis of vitamins B₁ (thiamine diphosphate) and B₆ (pyridoxol phosphate) in bacteria.     

十六烷基三甲基溴化铵光度滴定法测定硫酸软骨素钠盐

建立一种测定硫酸软骨素的新方法。十六烷基三甲基溴化铵在KH2 PO4 Na2 HPO4 缓冲溶液中、乳化剂OP共存下与硫酸软骨素反应形成离子对缔合物 ,溶液转变成稳定的乳化液。用光度滴定法测定硫酸软骨素。用标准加入法做回收试验 ,回收率为 99.9%～ 10 0 .2 % ,相对标准偏差0 .32 %～ 0 .4 0 %。方法应用于外贸样品测定 ,结果满意 ,方法准确、简便、快速