The Periodate‐Based Double Perovskites M2NaIO6 (M = Ca,Sr, and Ba)

The crystal structures of the M₂NaIO₆ series (M = Ca, Sr, Ba), prepared at 650 °C by ceramic methods, were determined from conventional laboratory X‐ray powder diffraction data. Synthesis and crystal growth were made by oxidizing I^– with O₂^(air) to I⁷⁺ followed by crystal growth in the presence of NaF as mineralizator, or by the reaction of the alkali‐metal periodate with the alkaline‐earth metal hydroxide. All three compounds are insoluble and stable in water. The barium compound crystallizes in the cubic space group Fm3m (no. 225) with lattice parameters of a = 8.3384(1) Å, whereas the strontium and calcium compounds crystallize in the monoclinic space group P2₁/c (no. 14) with a = 5.7600(1) Å, b = 5.7759(1) Å, c = 9.9742(1) Å, β = 125.362(1)° and a = 5.5376(1) Å, b = 5.7911(1) Å, c = 9.6055(1) Å, β = 124.300(1)°, respectively. The crystal structure consists of either symmetric (for Ba) or distorted (for Sr and Ca) perovskite superstructures. Ba₂NaIO₆ contains the first perfectly octahedral [IO₆]^5– unit reported. The compounds of the ortho‐periodates are stable up to 800 °C. Spectroscopic measurements as well as DFT calculations show a reasonable agreement between calculated and observed IR‐ and Raman‐active vibrations.     

Freezing and Hydrate Formation in Aqueous Sodium Perchlorate Solutions

The determination of the phase diagram of the binary system sodium perchlorate – water is reported. Beside the eutectic point, two polymorph crystal structures of sodium perchlorate dihydrate were determined. The two crystal structures are discussed, compared to each other and to other known sodiumhalide dihydrate crystal structures. The two polymorphs of the perchlorate dihydrate represent the two variants of connected octahedra in the layer structure found for sodium halide dihydrates.     

Synthesis and Properties of Aromatic Side Chained N‐Acyltaurate Surfactants

A series of anionic N‐acyltaurate surfactants, side chain containing aromatic nucleus (abbreviated as SAATT), were synthesized via Williamson reaction, hydrolyzation, and acylation. Krafft temperatures and surface properties of these surfactants at 30°C, that is, critical micelle concentration, cmc, surface excess concentration, Γ_max, surface area demand per molecule, A _min, efficiency in surface tension reduction, pC₂₀, effectiveness in surface tension reduction, π_cmc, and cmc/C₂₀ parameter were determined. It was shown that these surfactants exhibit good solubility which was confirmed by measuring Krafft temperature. The cmc of SAATT was much smaller than that of conventional surfactants with similar effective carbon numbers, and shifted to lower concentration with increasing hydrocarbon chain length. In addition, the γ_cmc decreased with decrease in Γ_max. The pC₂₀ and the cmc/C₂₀ got larger with the increase in hydrocarbon chain length. From the fluorescence intensity ratios of I ₁ (373 nm) and I ₃ (384 nm) using pyrene as a probe, it was indicated that the molecules of SAATT formed loose micelles with a broad size distribution.     

Micellization of Sodium Dodecyl Sulfate in Glycerol Aqueous Mixtures

The effect of glycerol on both micellar formation and the structural evolution of the sodium dodecyl sulfate (SDS) aggregates in the context of the action mechanism of the cosolvent has been studied. The critical micelle concentration and the degree of counterion dissociation of the surfactant over a temperature range from 20°C to 40°C were obtained by the conductance method. The thermodynamic parameters of micellization were estimated by using the equilibrium model of micelle formation. The analysis of these parameters indicated that the lower aggregation of the surfactant is mainly due to a minor cohesive energy of the mixed solvent system in relation to the pure water. The effect of glycerol on the mean aggregation number of the micelles of SDS was analyzed by the static quenching method. It was found that the aggregation number decreased with the glycerol content. This reduction in the micellar size seems to be controlled by an increase in the surface area per headgroup, which was ascribed to a participation of glycerol in the micellar solvation layer. Studies on the micropolarity of the aggregates, as sensed by the probe pyrene, indicated that this microenvironmental parameter is almost unaffected by the presence of glycerol in the mixture. However, an increase in the micellar microviscosity at the surface region was observed from the photophysical behavior of two different probes, rhodamine B and auramine O. These results suggest a certain interaction of the cosolvent in the micellar solvation of SDS micelles.     

MULTIPLE EMULSIONS STABILIZED BY COLLOIDAL MICROGRYSTALLINE CELLULOSE

Multiple emulsions stabilized by colloidal microcrystalline cellulose (CMCC, Avicel RC591) at the w/o and o/w interfaces, and by the addition of Span 80 or Span 85 at the w/o interface, were studied by means of brightfield microscopy, freeze-etch electron microscopy, droplet size distribution analysis and rheologic measurements. Stable multiple emulsions were prepared by incorporation of sodium chloride in the innermost aqueous phase, thereby creating an osmotic gradient preventing loss of the inner aqueous phase to the external aqueous phase. Freeze-etch electron microscopy of the multiple emulsions indicated the presence of a network of microcrystalline cellulose at the outer o/w interface. It may be assumed that the surfactant directly stabilized the w/o interface by adsorption at the interface, as well as indirectly by facilitating wetting of the microcrystalline cellulose by the oil. From rheologic measurements, the existence of a three-dimensional network in the external aqueous phase was indicated by the considerable degrees of thlxotropy and significant static yield values of these multiple emulsions.     

First Synthesis of Thienopyrazole Thioglycosides

Reported is the first method to prepare a new class of thienopyrazole thioglycosides via a one‐pot reaction of the sodium thienopyrazolthiolate salts with 2,3,4,6‐tetra‐O‐acetyl‐α‐D‐gluco‐and galactopyranosyl bromides. The sodium thienopyrazolthiolate salts are prepared using pyrazoldithioic acids and their corresponding mono ‐ and dithiolate salts.     

Micellar Effects on the Oxidation of d‐Glucose by Chromic Acid in Perchloric Acidic Medium

Kinetics of the reaction between d‐glucose and Cr(VI) in the absence and presence of surfactant micelles have been studied by a spectrophotometric method in aqueous‐acidic solutions of perchloric acid. It was observed that the reaction has a nonautocatalytic followed by an autocatalytic pathway. The rate of the initial stage increases with increase in [glucose], [HClO₄] and temperature. Due to precipitation, the effect of cationic micelles of cetyltrimethylammonium bromide (CTAB) could not be studied whereas the oxidation is catalyzed by anionic micelles of sodium dodecyl sulfate (SDS) and nonionic micelles of Triton X‐100 (TX‐100). The results are discussed in terms of the pseudo‐phase kinetic model. Activation parameters are evaluated and a mechanism consistent with the results is proposed. A rate law for the reaction has also been derived. The redox reaction occurs through a Cr(VI)→Cr(IV) path.     

聚吡咯/海藻酸钠纳米球的制备及其应用于高性能超级电容器

用海藻酸钠作为结构导向剂,通过原位氧化聚合吡咯法制备了聚吡咯/海藻酸钠(PPy/SA)纳米球.聚吡咯/海藻酸钠纳米球的形貌和结构通过扫描电镜(SEM)、X射线衍射(XRD)和傅里叶变换红外(FTIR)光谱进行表征.材料的电化学性能通过循环伏安法和恒电流充放电方法进行测试.电化学测试表明,聚吡咯/海藻酸钠纳米球在1 mol L-1KCl电解液中,电流密度为1 A g-1时其比电容高达347 F g-1.与纯聚吡咯相比较,聚吡咯/海藻酸钠纳米球具有更优异的循环稳定性能.     

十二烷基硫酸钠水溶液的动态表面吸附性质

利用MPTC型气泡压力张仪研究了十二烷基硫酸钠(SDS)溶液在不同NaCl 浓度下的动态表面吸附性质, 分析了离子型表面活性剂在表面吸附层和胶束中形成双电层结构产生表面电荷对动态表面扩散过程和胶束性质的影响. 结果表明, SDS在表面吸附过程中, 表面电荷的存在会产生5.5 kJ·mol^-1的吸附势垒(E_a), 显著降低十二烷基硫酸根离子(DS^-)的有效扩散系数(D_eff). 十二烷基硫酸根离子的有效扩散系数与自扩散系数(D)的比值(D_eff/D)仅为0.013, 这表明SDS与非离子型表面活性剂不同, 在吸附初期为混合动力控制吸附机制. 加入NaCl可以降低吸附势垒. 当加入不小于80 mmol·L^-1 NaCl后, E_a小于0.3 kJ·mol^-1, D_eff/D在0.8-1.2之间, 表现出与非离子型表面活性剂相同的扩散控制吸附机制. 同时, 通过分析SDS胶束溶液的动态表面张力获得了表征胶束解体速度的常数(k₂). 发现随着NaCl 浓度的增大, k₂减小, 表明SDS胶束表面电荷的存在会增加十二烷基硫酸根离子间的排斥力, 促进胶束解体.     

Preparation of 4,5 disubstituted-2H-1,2,3-triazoles from (Z)-2,3-diaryl substituted acrylonitriles

2H-1,2,3-Triazoles (2) were synthesized by [3+2] cycloaddition of (Z)-2,3-diaryl substituted acrylonitriles (1) with sodium azide and ammonium chloride in DMF/water. This method represents a facile and efficient reaction procedure for the synthesis of 4,5-diaryl-2H-1,2,3-triazoles in modest to good yields.