Facile and One-Pot Synthesis of 2 H -Chromene Derivatives Mediated by Vinyl triphenylphosphonium Salt

An efficient process that converts 2-hydroxybenzaldehyde and their derivetives to chromene derivatives via intramolecular Wittig reaction is described.     

Sodium Alginate and Poly(ethylene glycol) Blends: Thermal and Morphological Behaviors

Sodium alginate (SA) was blended with varying amounts of poly(ethylene glycol) (PEG) viz., 10, 20, 30, 40 and 50 wt % by using water as a solvent. The obtained SA/PEG blends have been characterized for thermal behavior by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) and surface morphology by scanning electron microscopic (SEM) methods. DSC analysis indicates the increase in glass transition temperature (T_g) of the blends with an increase in PEG content in the blend, which is due to chain entanglement. TGA results reveal the enhancement of thermal stability of SA/PEG blends in terms of the onset of degradation and percentage of weight loss. SEM photomicrographs shows the two phase morphology. This result indicates the immiscible nature of the SA/PEG blends.     

Room Temperature Phosphorescence of 1-Bromo-4-(bromoacetyl)naphthalene Induced by Sodium Deoxycholate

Sodium deoxycholate (NaDOC) can induce 1-bromo-4-(bromoacetyl)naphthalene (BBAN) to undergo strong room temperature phosphorescence (RTP) without the removal of dissolved oxygen from the solution. RTP spectra, phosphorescence polarization and ¹³C NMR results, along with the molecular modeling calculations, supported the conclusion that BBAN molecule was combined in a sandwich with two NaDOC molecules by a “back-to-back” hydrophobic interaction arising from the apolar faces of the NaDOC molecules, which provided BBAN with a rigid enough microenvironment to produce RTP.     

Mixed electrolytes in hydrophobic interaction chromatography†

An essential part of the modulation of protein‐binding capacity in hydrophobic interaction chromatography is the buffer‐salt system. Besides using “single” electrolytes, multicomponent electrolyte mixtures may be used as an additional tool. Both the protein solubility and the binding capacity depend on the position of a salt in the so‐called Hofmeister series. Specific interactions are observed for an individual protein‐salt combination. For salt mixtures, selectivity, recovery, and binding capacity do not behave like for the single salts that are positioned in between the two mixed components in the Hofmeister series, as the continuous correlation would suggest. Thus, finding strategies for mixed salts could potentially lead to improved capacities in hydrophobic interaction chromatography. Mixtures of ammonium sulfate, sodium citrate, sodium sulfate, sodium chloride, sodium acetate, and glycine were used to investigate the binding capacities for lysozyme and a monoclonal antibody on various hydrophobic resins. Resin capacity for two investigated proteins increases when mixtures consisting of a chaotropic and a kosmotropic salt are applied. It seems to be related to the rather basic isoelectric points of the proteins.     

Evaluation of the combinative application of SDS and sodium deoxycholate to the LC–MS‐based shotgun analysis of membrane proteomes

SDS and sodium deoxycholate (SDC) as two representative detergents have been widely used in LC–MS/MS‐based shotgun analysis of membrane proteomes. However, some inherent disadvantages limit their applications such as interference with MS analysis or their weak ability to disrupt membranes. To address this, the combinative application of SDS and SDC was developed and evaluated in our study, which comprehensively used the strong ability of SDS to lyse membranes and solubilize hydrophobic membrane proteins, and the high efficiencies of an optimized acetone precipitation method and SDC in sample clean‐up, protein recovery, and redissolution and digestion of precipitated proteins. The comparative study using a rat‐liver‐membrane‐enriched sample showed that, compared with other three commonly used methods including the filter‐aided sample preparation strategy, the combinative method not only increased the identified number of total proteins, membrane proteins, and integral membrane proteins by an average of 19.8, 23.9, and 24.8%, respectively, but also led to the identification of the highest number of matching peptides. All these results demonstrate that the method yielded better recovery and reliability in the identification of the proteins especially highly hydrophobic integral membrane proteins than the other three methods, and thereby has more potential in shotgun membrane proteomics.     

Synthesis and performance characterization of PS-PPEES nanoporous membranes with nonwoven porous support

The present work describes about the synthesis and characterization of Polysulfone blend nanoporous membrane with nonwoven support. This Nonwoven support provides mechanical strength to membrane while filtration process and minimizes membrane fouling. Hence it helps in better membrane performance in terms of salt rejection, improved flux, thermal stability and fairly increases in proton conductivity. In this work we have used K.C.270 nonwoven material consisting of fine polyester fibers and has a thickness of below 110 μm.     

NaBH4/DOWEX(R)50WX4: A Convenient Reducing System for Fast and Efficient Reduction of Carbonyl Compounds to Their Corresponding Alcohols

The reduction of a variety of carbonyl compounds was efficiently carried out with NaBH₄/DOWEX(R)50WX4 system. The reactions were performed to give the corresponding alcohols derivatives in perfect yields in THF at room temperature. Reduction of acyloins and a‐diketones by this reducing system produced efficiently the corresponding vicinal diols. Also, the reduction of aldehydes over ketones has been accomplished successfully by this system. Regioselectivity of this system was also investigated with exclusive 1,2‐reduction of conjugated carbonyl compounds to their corresponding allylic alcohols in high to excellent yields.     

Sensitive Determination of 2‐Methoxyestradiol in Pharmaceutical Preparations and Biological Fluids by KMnO4‐Na2SO3 Chemiluminescence System

A simple and novel flow‐injection chemiluminescence (FI‐CL) method was established for the determination of 2‐Methoxyestradiol (2‐ME) in pharmaceutical preparations and biological fluids. The method was based on the significant enhancement of the CL from the KMnO₄‐Na₂SO₃ reaction by 2‐ME in acidic medium. Under optimized conditions, the CL intensity was correlated linearly with concentration of 2‐ME in the range of 5.0 × 10^?8‐5.0 × 10^?6 M (r = 0.9995). The detection limit (3σ) of 2‐ME was 7.5 × 10^?9 M and the relative standard deviation was 0.8% at 5.0 × 10^?7 M 2‐ME (n = 8). The proposed method was successfully applied for the flow‐injection CL determination of 2‐ME in pharmaceutical preparations and biological fluids with the recoveries from 92.4 to 106.8%. The possible CL reaction mechanism was also discussed briefly.     

Ultrasonicated Condensation of Indene and 2-Nitrofluorene with Aromatic Aldehydes Catalyzed by bis-(pMethoxyphenyl)telluroxide (BMPTO)

The condensation of indene or 2-nitrofluorene with aromatic aldehydes catalyzed by bis-(p-methoxyphenyl)telluroxide (BMPTO) under ultrasonic wave irradiation gave corresponding fulvenes in fair to good yield.     

Reaction of 4-(2′-Hydroxyaryl)-1,3-dithiolium Salts with Sodium Sulfide. A Selective Synthesis of 2′-Hydroxyacetophenones

Abstract

The treatment of 4-(2′-hydroxyaryl)-2-(N,N-dialkylamino)-1,3-dithiolium perchlorates (1a–g) with sodium sulfide nonahydrate in ethanol at room temperature affords the corresponding 1,3-dithiole-2-thiones (2a–g). When these reactions are conducted in boiling ethanol, 2′-hydroxyacetophenones (3a–g) have been obtained in good to excellent yield. A tentative mechanism for the formation of 3a–g shows that this reaction is regioselective, this being established by the presence of hydroxyl group in 2′-position. That has been confirmed in a control experiment, 4-phenyl-2-(piperidin-1-yl)-1,3-dithiolium perchlorate affording a mixture of condensation products of acetophenone and phenylacetaldehyde, under similar reaction conditions.