Electrochemical behaviour of Pt(100), Pt(111) and Pt polycrystalline surfaces in hydrogencarbonate solution

It was demonstrated that adsorbed CO is obtained from the reduction of NaHCO₃ solution when Pt(100), Pt(110), disordered Pt(111) and polycrystalline electrodes are employed. Reduction of CO₂ coming from the dissociation of the hydrogencarbonate anion is proposed as the reaction that produces CO. By using Fourier transform infrared spectroscopy, linear and multi-bonded CO were detected on polycrystalline platinum electrodes. The shape of the band associated with linearly adsorbed CO is monopolar as a consequence of the partial overlapping, at lower wavenumbers, of the absolute bands at both potentials (0.05 and 0.35 V).     

甲基化的β-环糊精与十六烷基三甲基溴化胺的相互作用

环糊精与表面活性剂的相互作用已有许多研究,但多局限于β－环糊精（β－CD）,而修饰的β－环糊精与表面活性剂的相互作用研究较少[1－3]．分子内扭转电荷转移（TICT）激发态对介质极性高度敏感性,已成功地用于探针环糊精与表面活性剂的相互作用[4]．研究表明,β－CD能够诱     

聚丙烯酰胺与混合表面活性剂的相互作用

通过粘度和紫外吸收光谱的测定，研究了ＰＡＭ与Ｒ１２ＳＯ３Ｎａ－Ｒ１１ＣＯＯＮａ混合表面活性剂之间的相互作用，结果表明，ＰＡＭ可与混合表面活性剂形成复合物，从而使体系表现出典型聚电解质的粘度行为。可能的机理是，以疏水力形成的Ｒ１２ＳＯ３＾－—Ｒ１１ＣＯＯＨ（Ｎａ）预胶束或二聚体通过ＰＡＭ－Ｒ１１ＣＯＯＨ间的氢键力相结合。进而使大分子链上带有大量负电荷，静电斥力引起大分子链伸展，因而产生电粘效应。     

溶液盐效应的气液色谱研究

本文将气液色谱法用于测定环丁砜含盐溶液中以烃、芳烃、氯代烃、醇和酮为溶质的盐效应常数,结果表明,大多数溶质的盐效应关系可用Setschenow方程描述;负离子的性质对盐效应的影响比正离子更重要;负离子的电子向氯代烃中氯原子3d空轨道的迁移作用对其k_s的影响很大。     

定标粒子理论预测乙醇－水体系汽液平衡盐效应

测定了７０℃下３个１－１型电解质（ＮａＣｌ、ＮａＢｒ、ＫＣｌ）在各种不同浓度的乙醇－水体系中的汽液平衡盐效应参数，并给出用定标粒子理论计算盐效应参数的方法。硬球作用项采用Ｍａｓｔｅｒｔｏｎ－Ｌｅｅ方程，软球作用项采用胡英的径向分布函数。分子间力在Ｌｅｎｎａｒｄ－Ｊｏｎｅｓ位能函数基础上计入偶极－偶极、偶极－诱导偶极、电荷－偶极、电荷－诱导偶极的贡献，其中离子－分子间的静电作用项仅限于规则排列的第一配位圈之内。将混合溶剂的局部介电常数视为液相浓度的函数，函数关系由实验拟合。在乙醇浓度变化的很大范围内，３个体系的预测与实验结果基本相符。     

毛细管胶束电动色谱对复方药物有效成分的定量研究

本文报道采用毛细管胶束电动色谱法对复方药物去痛片和感冒灵中有效成分进行了分离和定量研究。以0.05毫米内径、45厘米长的弹性石英毛细管为分离柱,用十二烷基硫酸钠胶束溶液,在选定的实验条件下,各组分在十几分钟内就能很好的分离。采用两点内标法定量,所得结果与HPLC法测定结果相一致。该法具有装置简单,无需价格昂贵的分离柱,样品预处理简单等优点,可在药物分析中推广。     

单扫描示波极谱法测定扑热息痛

扑热息痛与NaNO2在中性介质中发生反应，其亚硝化衍生物具有良好的电活性。在pH9．37的Britton-Robinson缓冲溶液中，于-0．56V(vs．SCE)产生灵敏的极谱还原峰，峰电流与扑热息痛质量浓度在0．007-0．4mg/L范围有良好的线性关系，检测下限为5μg/L。此法已用于测定小儿速效感冒灵。     

溶胶-凝胶法制备纳米氢氧化铝溶胶

研究了利用铝酸钠溶液碳酸化产生的沉淀, 经胶溶作用制备出纳米氢氧化铝溶胶的过程. 分析了铝酸钠溶液滴加到大量碳酸氢钠溶液中时发生的反应. X射线衍射研究结果表明, 在纳米氢氧化铝溶胶制备过程中, 从无定形氢氧化铝沉淀到拟薄水铝石的晶型转变过程是氢氧化铝沉淀胶溶时溶解再析出的过程. 将碳酸氢钠加入到苛性比为1.7的铝酸钠溶液中, 中和至苛性比为1.3后, 溶液诱导期中的紫外光谱显示270 nm处的Al(OH)3-6吸收增强. 经与含铝原子六配位的晶体紫外光谱对比后表明, 在铝酸钠分解生成氢氧化铝的过程中, 其铝的配位结构从四配位转化为六配位. 拟薄水铝石溶胶粒子的形貌与胶溶所用的酸和分散剂有关.     

An investigation of the chemiluminescence reaction in the sodium hypochlorite–folic acid–emicarbazide hydrochloride system

A chemiluminescence method for the determination of folic acid by the sodium hypochlorite–folic acid–semicarbazide hydrochloride system with a new flow injection technique has been established. The new method can perform simple, sensitive and rapid determinations of folic acid. The response to the concentration of folic acid, in the range of 1.0×10⁻⁷5.0×10⁻⁵ g/ml, is linear. The relative standard deviation of the method is 2.3% (C_s=4.0×10⁻⁶ g/ml, n=11). The detection limit is 2.7×10⁻⁸ g/ml. This method is suitable for automatic and continuous analysis, and has been successfully tested for the determination of folic acid in a folic acid tablet.     

A new dodecylsulfate-selective supported liquid membrane electrode based on its N-cetylpyridinium ion-pair

A supported liquid and a poly(vinyl chloride) (PVC)-based membrane selective for dodecylsulfate (DS⁻) ion are described. The active element is a membrane containing a dissolved ion association complex of DS⁻ with cetylpyridinium (CP⁺) cation. The supported liquid membrane electrode (acetophenone as solvent) showed a Nernstian response towards the DS⁻ anion over the concentration range of sodium dodecylsulfate (SDS) from 8.3×10⁻³ to 1.0×10⁻⁶ mol dm⁻³ at 25 °C. The proposed electrode also showed a super-Nernstian potential response (108±2 mV decade⁻¹) at low concentrations (1.0×10⁻⁹ to 1.0×10⁻⁶ mol dm⁻³). Moreover, this electrode showed good selectivity and precision (R.S.D.?2.0%), and was usable within the pH range 4.0-6.8. The proposed electrode revealed a lower limit of detection of 6.3×10⁻⁷ mol dm⁻³ and improved selectivity in comparison with the some previously reported DS⁻ ion selective electrodes. The isothermal temperature coefficient of this electrode amounted to −0.001 V °C⁻¹. The liquid membrane electrode may find application in the direct determination of SDS by the standard addition method at pH 5.0, and in the physicochemical studies of surfactant solutions.