The surface and materials science of tin oxide

The study of tin oxide is motivated by its applications as a solid state gas sensor material, oxidation catalyst, and transparent conductor. This review describes the physical and chemical properties that make tin oxide a suitable material for these purposes. The emphasis is on surface science studies of single crystal surfaces, but selected studies on powder and polycrystalline films are also incorporated in order to provide connecting points between surface science studies with the broader field of materials science of tin oxide. The key for understanding many aspects of SnO₂ surface properties is the dual valency of Sn. The dual valency facilitates a reversible transformation of the surface composition from stoichiometric surfaces with Sn⁴⁺ surface cations into a reduced surface with Sn²⁺ surface cations depending on the oxygen chemical potential of the system. Reduction of the surface modifies the surface electronic structure by formation of Sn 5s derived surface states that lie deep within the band gap and also cause a lowering of the work function. The gas sensing mechanism appears, however, only to be indirectly influenced by the surface composition of SnO₂. Critical for triggering a gas response are not the lattice oxygen concentration but chemisorbed (or ionosorbed) oxygen and other molecules with a net electric charge. Band bending induced by charged molecules cause the increase or decrease in surface conductivity responsible for the gas response signal. In most applications tin oxide is modified by additives to either increase the charge carrier concentration by donor atoms, or to increase the gas sensitivity or the catalytic activity by metal additives. Some of the basic concepts by which additives modify the gas sensing and catalytic properties of SnO₂ are discussed and the few surface science studies of doped SnO₂ are reviewed. Epitaxial SnO₂ films may facilitate the surface science studies of doped films in the future. To this end film growth on titania, alumina, and Pt(1 1 1) is reviewed. Thin films on alumina also make promising test systems for probing gas sensing behavior. Molecular adsorption and reaction studies on SnO₂ surfaces have been hampered by the challenges of preparing well-characterized surfaces. Nevertheless some experimental and theoretical studies have been performed and are reviewed. Of particular interest in these studies was the influence of the surface composition on its chemical properties. Finally, the variety of recently synthesized tin oxide nanoscopic materials is summarized.     

芯片式流通池顺序注射可更新表面反射光谱法用于酶反应检测

将芯片式流通池顺序注射可更新表面反射光谱法用于酶反应检测。HRP催化H2O2氧化BPR底物的反应用于对H2O2的检测。此反应体系与葡萄糖氧化酶联用，用于对血清中葡萄糖的检测。     

BRCA1 mutation screening using restriction endonuclease fingerprinting-single-strand conformation polymorphism in an automated capillary electrophoresis system

Efficient mutation scanning techniques are needed for the rapid detection of novel disease-associated mutations and rare-sequence variants of putative importance. The large size of the breast cancer 1 gene (BRCA1) and the many mutations found throughout its entire coding sequence make screening for mutations in this gene particularly challenging. We have developed a method for screening exon 11 of the BRCA1 gene based on restriction enzyme digestion of fluorescence-labeled polymerase chain reaction (PCR) products followed by single-strand conformation polymorphism (SSCP) using an automated capillary electrophoresis system, denoted capillary restriction endonuclease fingerprinting (REF)-SSCP electrophoresis. Using this strategy on a control set of samples, we were able to detect 17 of 18 known sequence alterations. The method was then applied to screen 73 Norwegian females with family histories of breast and/or ovarian cancer. A total of 172 sequence alterations were detected, including substitutions, insertions, and deletions. One novel substitution of unknown function was identified. Sequencing of all samples negative in the capillary REF-SSCP system gave no additional mutations confirming the high sensitivity of the described methodology. Capillary REF-SSCP electrophoresis appeared as a technically convenient technique, requiring amplification of fewer PCR fragments than traditional SSCP. The novel strategy allows high-throughput mutation scanning without radioactive labeling and polyacrylamide gel electrophoresis (PAGE).     

淫羊藿根与叶活性成分的分析和比较

采用细胞膜色谱法（ＣＭＣ）筛选，并结合离体药理实验确定主要活性成分，利用高效液相色谱法分析比较了淫羊藿根与叶中的活性成分及其差异性．色谱条件为Ｋｒｏｍａｓｉｌ ＯＤＳ 柱（１５０ ｍｍ× ４．６ ｍｍ．Ｉ．Ｄ ）流动相甲醇－水（７０：３０，Ｖ：Ｖ）；检测波长２７０ｎｍ。筛选发现淫羊藿根中的两个有效成分ＹＹＨ－２１４和ＹＹＨ－２１６对血管有较强的舒张作用，表明活性成分在ＣＭＣ模型体系中的保留特性与药理作用之间存在良好的相关性。在此色谱条件下淫羊藿叶未检测到这两种活性成分．     

Expression and Characterization of Catalytic Domain of T Cell Protein Tyrosine Phosphatase（△TC-PTP） —— Immunohistochemical Study of △TC-PTP Expression in Non-small Cell Lung Carcinomas

This study objective was to express and characterize the catalytic domain of the human T cell protein tyrosine phosphatase（△TC-PTP） and to study immunohistochemically the expression of △TC-PTP in human non-small cell lung cancers. △TC-PTP gene was PCR amplified with the cDNA of human TC-PTP as template, and cloned into the pT7 expression vector. The recombinant pT7-△TC-PTP was expressed in E. coli Rosetta （ DE3 ） host cells and puri- fied. The enzymatic characteristics of △TC-PTP including enzyme activity and kinetics assay were measured. The antiserum was prepared by immunizing rabbit with the purified recombinant △TC-PTP. Rabbit polyclonal antibody against △TC-PTP was purified by PVDF immobilized antigen affinity chromatography. Immunohistochemical staining of lung cancer tissues was performed with antibody against △TC-PTP protein. △TC-PTP gene was correctly cloned, expressed, and purified. The recombinant △TC-PTP had a highly catalytic activity of PTPase. Squamous cell lung carcinoma showed a significantly higher expression rate of △TC-PTP （76. 92%, 10/13 ） than adenocarcinoma （57.14%, 4/7） and normal lung tissue（20%, 1/5 ）. This study represents the first demonstration that △TC-PTP is highly expressed in human squamous cell lung carcinomas. In addition, this study provides an important basis for further studying the biological function of TC-PTP and its relationship with lung carcinomas and other diseases.     

Mass transport in gas channels of electrochemical cells with a solid-oxide electrolyte: Allowing for the electrode reaction rates in numerical calculations

The concentration fields, Nusselt number distributions along the electrode, and ratios of concentrations of electrochemically active components at the entrance into and exit out of an electrochemical cell are determined by numerical integration of the convective-diffusion equation for a broad range of rate constants of electrode reactions, Peclet numbers, and geometrical parameters of channels. Three regions of parameter values are revealed. At low reaction rates (K _l < 0.5), mass transfer is completely determined by electrode kinetics; at high rates (K _l > 20), it is completely determined by the diffusion in the gas phase; and in the intermediate region of values of K _l it is necessary to allow for both the diffusion processes and the electrode reactions.Translated from Elektrokhimiya, Vol. 41, No. 3, 2005, pp. 317–324.Original Russian Text Copyright © 2005 by Ezin, Somov.     

Markov processes in single molecule fluorescence

This article examines the current status of Markov processes in single molecule fluorescence. For molecular dynamics to be described by a Markov process, the Markov process must include all states involved in the dynamics and the first-passage time (FPT) distributions out of those states must be describable by a simple exponential law. The observation of non-exponential FPT distributions or other evidence of non-Markovian dynamics is common in single molecule studies and offers an opportunity to expand the Markov model to include new dynamics or states that improve understanding of the system.     

Study on Extraction Process of Root of Henry Wood Betony Polysaccharides and Their Antitumor Activity against S180

We optimized the hot water extraction of polysaccharides from the root of Henry wood betony (RHWPs) using a uniform test and explored their anti-tumor activities in vitro and in vivo. The optimal extraction conditions were as follows: 40 min extraction time, liquid/solid ratio 30 mL/g, 100 min soaking time, two extraction cycles, 100% ethanol concentration, and extraction temperature of 80 °C. The molecular weight distribution of RHWPs with MWs was 228,600 g/mol and 5001 g/mol. The IR spectrum further indicated that RHWPs are acidic polysaccharides containing pyranose and furan rings. The main monosaccharides found in RHWPs were mannose, ribose, l-rhamnose monohydrate, glucuronic acid, galacturonic acid, glucose, galactose, xylose, arabinose, and fucose. RHWPs inhibited the proliferation of S180 tumor cells and induced apoptosis in vitro. Oral administration of RHWPs to tumor-bearing mice significantly inhibited the growth of the S180 xenografts, accelerated apoptosis in tumor cells, and expanded the necrotic regions. Furthermore, RHWPs also markedly increased the levels of TNF-α, IFN-γ, and IL-2 in the sera of tumor-bearing mice, and activated immune cells such as lymphocytes, NK cells, and macrophages, thereby inducing tumor cell apoptosis. Taken together, RHWPs are a promising anti-tumor agent that ought to be explored further.     

Cellulose-precursor synthesis of nanocrystalline Ce<Subscript>0.8</Subscript>Gd<Subscript>0.2</Subscript>O<Subscript>2−δ</Subscript> for SOFC anodes

Developments of intermediate-temperature solid oxide fuel cells (IT SOFCs) require novel anode materials with a high electrochemical activity at 800–1070 K. The polarization of cermet anodes, made of nickel, ceria and yttria-stabilized zirconia (YSZ) and applied onto a YSZ solid electrolyte, can be significantly reduced by catalytically active ceria additions, the relative role of which increases with decreasing temperature. Further improvement is observed when using Ce_0.8Gd_0.2O_2– (CGO) having a high oxygen ionic conductivity instead of undoped ceria, owing to enlargement of the electrochemical reaction zone. Nanocrystalline CGO powders with grain sizes of 8–35 nm were thus synthesized via the cellulose-precursor technique and introduced into Ni–CGO–YSZ cermets, and tested in contact with a (La_0.9Sr_0.1)_0.98Ga_0.8Mg_0.2O_3– (LSGM) electrolyte at 873–1073 K. The results showed that the anode performance can be enhanced by additional surface activation, in particular by impregnation with a Ce-containing solution, and also by incorporation of YSZ, which probably acts as a cermet-stabilizing component. The overpotential of the surface-modified Ni–CGO (25 wt%–75 wt%) anode in a 10% H₂/90% N₂ atmosphere was approximately 110 mV at 1073 K with a current density of 200 mA/cm².Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

New understanding of the nature of OH adsorption on Pt(1 1 1) electrodes

The adsorption of hydroxyl on Pt(1 1 1) single crystal electrodes from aqueous acidic solutions is carefully reinvestigated. The effect of small additions (10⁻⁸–10⁻⁵ M) of chloride and bisulphate anions on the OH adsorption region in perchloric acid solution has been studied. Two regions can be differentiated in the voltammetric profile, that behave differently after the addition of the foreign anion. The initial broad adsorption process is unaffected until the highest concentration is attained. However, the sharper peak at higher potentials is affected even at the lower anion concentration. Since mass transport limitations allow to discard the anion adsorption as the main process giving this peak, we propose that the two processes are due to the dissociative adsorption of two different kinds of water, that are affected by the anion in a different way. From this idea, a new model, based on the Frumkin adsorption isotherm, is proposed, which gives an excellent fit of the experimental results.