A cell functional minimization scheme for parabolic problem

We are interested in a robust and accurate finite volume scheme for 2-D parabolic problems derived from the cell functional minimization approach. The scheme has a local stencil, is locally conservative, treats discontinuity rigorously and leads to a symmetric positive definite linear system. Since the scheme has both cell centered unknowns and cell edge unknowns, the computational cost is an issue and a parallel algorithm is then suggested based on nonoverlapping domain decomposition approach. The interface condition is of the Dirichlet–Robin type and has a parameter λ. By choosing this parameter properly, the convergence of the iteration process could be sped up. Numerical results for linear and nonlinear problems demonstrate the good performance of the cell functional minimization scheme and its parallel version on distorted meshes.     

A fluorescent chemosensor for Cu2+ ions and its application in cell imaging

A new on-off fluorescent probe 1 for Cu²⁺ based on Schiff base compound was designed and synthesized by one-step reaction. The single probe 1 exhibited strong green fluorescence emission. A fluorescence quenching effect and faint color change were observed as soon as the Cu²⁺ was added to the probe system in H₂O/EtOH (v/v = 8:2, HEPES buffer, 0.05 M, pH = 7.4) solution. Other common metal cations did not cause the changes in the fluorescence and color of the probe 1. The optical properties were studied by the fluorescence emission and UV–Vis spectra. Meanwhile, the geometry optimizations of probe 1 and the [1-Cu²⁺] coordination complexes were also carried out by DFT using the Gaussian 09 program, in which the B3LYP function was used. Based on experimental measurement and theoretical analysis, we can know that the combination ratio of the probe and Cu²⁺ is 2:1 and the limit of detection (LOD) is as low as 5.3 × 10^?9 M Besides, the probe 1 was also used to analyze the Cu²⁺ in living cells.     

Cooperation within the Small Cell: The indoor,correlated shadowing case

The deployment of Small Cells in fourth generation (4G) communication systems is aimed at providing significant capacity improvements and higher availabilities. However, the design of Small Cell systems in indoor environments is especially challenging due to high shadowing attenuation induced by clutter and human blockage. This paper studies node cooperation and multiple relaying and proposes novel analytical formulas for the outage probability of cooperative Small Cells suffering from shadowing. The channel fading gains are modeled as correlated lognormal random variables, in order to reflect the properties of indoor propagation environments. Various cooperative strategies are considered, taking into account the use of one or two relays and different receiver combining techniques. In addition, the relative performance of each cooperative configuration and the benefit of cooperation over non-cooperation are investigated. Finally, interesting and useful insights are produced regarding the impact of the correlated lognormal environment parameters on the configuration of cooperative Small Cells.     

Influence of cell packing by centrifugation on 40-MHz ultrasound backscatter

High-frequency ultrasound (HFUS) signals backscattered from RBL-2H3 cell pellets prepared under different centrifugal forces were analyzed to investigate the packing effect of cell aggregates. The measurements were performed in a pulse-echo setup with a 40-MHz transducer. The changes of ultrasound signals from cell pellet in backscattered power, statistical parameter, and pellet thickness were monitored after centrifugation at between 100g and 1600g. Experimental results showed that the HFUS backscattered power from cell pellets was inversely proportional to centrifugal force and increased to a plateau within 1-2 h after centrifugation. The initial thickness of cell pellets decreased with higher centrifugal force, but the changes in thickness and time that took to reach a plateau increased at higher centrifugal force. The envelope statistics of backscattered signals with Nakagami distribution indicates that the centrifugal force and elapsed time after centrifugation affected the backscattering characteristics. The present study suggests that centrifugal force and data acquisition time after cell pellet formation should be considered in in vitro cell packing method with centrifugation to emulate the tissue in vivo.     

Characterization of Compounds Acting on the α1A Adrenergic Receptor from Caulis spatholobi by Cell Membrane Chromatography with Possible Application for Treatment of Benign Prostatic Hyperplasia

Tamsulosin hydrochloride is a commonly used drug for treatment of benign prostatic hyperplasia which is a disease affecting elderly men. However, adverse reactions may occur when tamsulosin hydrochloride is used for long-term treatment. Caulis spatholobi is a traditional Chinese medicine with many pharmacological effects. In this study, a cell membrane chromatography column was combined with high-performance liquid chromatography–mass spectrometry to determine the active compounds acting on α1A adrenergic receptor from Caulis spatholobi. Formononetin was shown to be active on the α1A adrenergic receptor. This was investigated by a competitive binding assay that demonstrated that tamsulosin hydrochloride and formononetin employ the same binding sites. Thus, formononetin is a potential α1A adrenergic receptor antagonist for treating benign prostatic hyperplasia.     

Investigation on cell biocompatible behaviors of polyaniline film fabricated via electroless surface polymerization

Considering for the potential application in tissue engineering, polyaniline (PANi) film was fabricated via a two-step route: a self-assembled monolayer of C₆H₅NHC₃H₆Si(OMe)₃ was firstly formed on the single-crystal Si substrate; the conducting PANi film was then prepared through electroless surface polymerization of the aniline molecules on the aniline monolayer-bearing silane surface in an acidic aqueous solution. The formation of PANi film on Si surface was confirmed by characterizations of X-ray photoelectron spectroscope (XPS) and specular reflectance Fourier transform infrared (SR-FTIR) spectrum, etc. At last, the proliferation behaviors of PC-12 cells on the PANi film surface were studied by the [3-(4,5-dimethyldiazol-2-yl)-2,5-diphenyl tetrazolium bromide] (MTT) colorimetric assays, acridine orange fluorometric staining, and scanning electron microscope (SEM) observation, etc. The results demonstrate that the as-prepared PANi film provides high ability for cell proliferation, exhibiting promising potentials as surface coating to cultivate neuronal cells for applications in the tissue engineering.     

Engineering quadrupole magnetic flow sorting for the isolation of pancreatic islets

Quadrupole magnetic flow sorting (QMS) is being adapted from the separation of suspensions of single cells (<15 μm) to the isolation of pancreatic islets (150–350 μm) for transplant. To achieve this goal, the critical QMS components have been modeled and engineered to optimize the separation process. A flow channel has been designed, manufactured, and tested. The quadrupole magnet assembly has been designed and verified by finite element analysis. Pumps have been selected and verified by test. Test data generated from the pumps and flow channel demonstrate that the fabricated channel and peristaltic pumps fulfill the requirements of successful QMS separation.     

Thermosensitivity of red blood cells from Down's syndrome individuals

Biochemical disturbances of the reactive oxygen species metabolism revealed in subjects with Down's syndrome (DS), and the findings indicating that heat-induced cell alterations have been, at least, partly mediated by reactive oxygen species, made the elucidation of the response of trisomic cells to elevated temperatures of special interest. Kinetic analysis of cell-survival curves, accompanied by the flow cytometry and the scanning electron microscopy (SEM) examinations, and their relationship with the cell membrane fluidity, were undertaken. At each temperature (48-54 degrees C), Dq parameters, representing the ability to accumulate sublethal damages, were similar for both cell groups. D0 parameters (inverse leakage rates; D0 = 1/k) were greater for DS cells at each temperature below 54 degrees C. The haemolysis sensitivity ratio (HSR) showed that DS erythrocytes were, in average, 1.60 times more resistant to heat injury than those from normal subjects. Activation energies of haemolysis, calculated according to the Arrhenius equation, were similar both for normal (290.8 +/- 6.5 [kJ/mol]) and DS erythrocytes (288.0 +/- 5.5 [kJ/mol]). Flow cytometry studies showed that the scattering properties of intact DS erythrocytes (reflecting size, volume, shape and cell membrane surface morphology) were different than those of normal cells. Scanning electron micrographs and scattering diagrams obtained for cells submitted to heat stress (51 degrees C) confirmed that DS erythrocytes were more resistant, to a certain extent, to heat-induced disruption than normal cells. The steady-state fluorescence anisotropy of TMA-DPH (1-(4-trimethyl-ammoniumphenyl)-6-phenyl-1,3,5-hexatriene) showed that untreated DS erythrocytes had substantially lower fluidity (r = 0.356 +/- 0.008) of the outer monolayer of cell membranes as compared to normal cells (r = 0.324 +/- 0.011). The increase of the cell membrane fluidity during exposure to heat was observed. The greatest elevation of cell membrane fluidity occurred during the preleakage period, immediately upon the heat treatment and was considered as a rate-limiting step of heat-induced haemolysis.     

Uptake of magnetic nanoparticles into cells for cell tracking

A challenge for future applications in nanotechnology is the functional integration of nano-sized materials into cellular structures. Here we investigated superparamagnetic Fe₃O₄ iron oxide nanoparticles coated with a lipid bilayer for uptake into cells and for targeting subcellular compartments. It was found that magnetic nanoparticles (MNPs) are effectively taken up into cells and make cells acquire magnetic activity. Biotin-conjugated MNPs were further functionalized by binding of the fluorescent tag streptavidin–fluorescein isothiocyanate (FITC) and, following uptake into cells, shown to confer magnetic activity and fluorescence labeling. Such FITC-MNPs were localized in the lysosomal compartment of cells which suggests a receptor-mediated uptake mechanism.     

Characterization of Ti6Al4V implant surface treated by Nd:YAG laser and emery paper for orthopaedic applications

A more noble and biocompatible Ti alloy was achieved at fluence of 140 J cm⁻² where the implant indicated a higher degree of hardness (825HV), higher corrosion resistance (−0.21 V) and highest hydrophilicity (i.e. θ_c = 37°) compared with 70° of the control sample. These values corresponded to 58 and 39 mN m⁻¹ of surface tension respectively. The laser treated samples at 140 J cm⁻² showed higher wettability characteristics than mechanically roughened surface. Cell growth and their spreading condition in a specific area were analyzed by SEM and Image J Program software. Clearly, more cells were attached (1.2 × 10⁵) to and spread (488 μm²) over the surface at 140 J cm⁻² than in any other condition. Pathologically, the treated samples indicated no sign of infection.