Method of immobilization of carboxymethyl-dextran affects resistance to tissue and cell colonization

Coatings from carboxymethylated dextrans (CMDs) were fabricated, analyzed by XPS, and investigated for their ability to inhibit corneal epithelial tissue outgrowth and bovine corneal epithelial cell attachment and growth. CMDs with differing degrees of carboxymethyl substitution and various molecular weights were synthesized by the solution reaction of dextrans with bromoacetic acid under different reactant ratios. The CMD compounds thus obtained were attached onto aminated surfaces produced in two ways: by the plasma deposition of a coating from n-heptylamine vapour, and by the plasma deposition of an acetaldehyde coating onto whose surface aldehyde groups the polyamine compounds polylysine, polyethyleneimine and polyallylamine were immobilized to provide platforms for CMD immobilization. XPS spectra showed that the latter route produced thicker coatings than the former approach. CMD molecules attached directly onto the plasma-fabricated amine surface supported some tissue migration; the extent of carboxymethyl substitution and the molecular weight of the CMDs had little influence. For CMDs immobilized via polyamine spacers, on the other hand, tissue outgrowth was completely inhibited, and again there were no discernible effects from the extent of carboxymethyl substitution and the molecular weight of the CMDs. In assays involving cell attachment and growth, analogous observations were found. Thus, the mode of immobilization of these polysaccharide coatings is the dominant factor in their anti-fouling performance, suggesting that optimization of the architecture of polysaccharide coatings may be an important factor for maximizing their cell-repellent abilities.     

Nickel determination in osteoblast-like cell culture medium by adsorptive cathodic stripping voltammetry with a mercury microelectrode

The purpose of this study is to investigate the influence of nickel, which is an alloying element in commonly used metallic biomaterials, on the biomaterials mineralization process. An electrochemical method was developed to quantify this metal ion in osteoblast-like cell culture medium (OST) by performing adsorptive cathodic stripping voltammetry (CSV) with dimethylglyoxime (DMG) at a mercury film microelectrode (MFM). The optimized analytical conditions and the square-wave CSV parameters for the analysis are: DMG concentration: 5.00 × 10⁻⁴ mol L⁻¹; ammonium chloride buffer: 0.10 mol L⁻¹ (pH 9.2); frequency: 50 Hz, amplitude 20 mV; step: 2 mV; adsorption time: 10 s, deposition potential: −0.70 V and reduction potential: −1.20 V. The limit of detection was 7.70 × 10⁻⁹ mol L⁻¹ for an adsorption time of 10 s. The results achieved by CSV using the MFM were compared to those obtained by atomic absorption spectrometry (AAS) to ensure the reliability of the electrochemical method. The mineralization process was evaluated by biochemical and histochemical assays.     

Paired Electrolysis of Aldoses in a Divided Flow Cell

Simultaneous anodic oxidation and cathodic reduction of aldoses in a divided flow cell were studied. The stream of the anolyte was an aqueous solution containing D-glucose, sodium bromide, and sodium bicarbonate. The stream of the catholyte was also an aqueous solution containing xylose and sodium sulfite. The factors which affected both the anodic and cathodic reactions were studied. The results indicate that the flow rates and temperatures of the anolyte and the catholyte, concentrations of the aldoses, pH values and the material of electrodes significantly affect both anodic and cathodic yields. The selectivities of gluconic acid in the anode and xylitol in the cathode were very high. The power consumption of paired electrolysis in the flow system was less than paired electrolysis in a batch system.     

Extended applications of electric cell-substrate impedance sensing for assessment of the structure-function of α2β1 integrin

Electric cell-substrate impedance sensing (ECIS) was applied to assess the structure-function of α2β1 integrin, receptor for collagen and laminin. On collagen-coated gold electrodes, expression of this integrin on human rhabdomyosarcoma (RD) cells (RDX2C2) yielded a five-fold increase in resistance when compared with mock transfected RD (RDpF) cells (34.5±5.2 versus 6.5±0.8 Ω/cell). An intermediate level of 16±2 Ω/cell was measured upon expression of an α2β1 mutant that lacked the α2 cytoplasmic domain (RDX2CO). On laminin, the resistance measured for RDX2C2 cells was also higher but only twice that of RDpF cells at 71±4 and 37±4 Ω/cell, respectively. In comparison, RDX2CO cells (38±4 Ω/cell), exhibiting no enhanced adhesive function, yielded a similar result to that of RDpF cells. On fibronectin, RDX2C2 and RDpF cells, exhibiting comparable levels of adhesion, were similar in resistance measurements at 85±5and 89±7 Ω/cell, respectively. It has been shown that deletion of α2 cytoplasmic domain results in dysregulated recruitment of the α2β1 mutant to focal adhesion complexes that mediate binding of fibronectin. RDX2CO cells on fibronectin, exhibiting reduced adhesive function, was associated with noticeably lower resistance (60±4 Ω/cell). Monitoring electroporation of the RD plasma membrane also indirectly validated cell attachment as reflected by the resistance measured. Results from this study demonstrated the potential of ECIS for study of the structure-function of βl integrin adhesion receptors.     

Influence of mechanical properties of pectin films on charge density and charge density distribution in pectin macromolecule

The hydration and mechanical properties of citrus pectin films were examined in conditions relevant to those in the plant cell wall. The pectins used for this study varied in the degree of esterification (DE) (high or low) and charge distribution on the backbone (random or block). The hydration of the films was controlled in an osmotic pressure experiment using polyethylene glycol solutions (PEG 20000). Hysteresis tests at constant deformation rate (stress vs deformation) were used for investigating the mechanical behaviour of films. Mechanical and hydration properties of pectin films were examined as a function of charge density, charge density distribution and counterion environment—K⁺, Ca²⁺, Mg²⁺. Swelling decreased with increasing counterion concentration. The effect is stronger in the case of Ca²⁺ and Mg²⁺ for low esterified pectins and therefore crosslinks from divalent ions could be assumed. The crosslink effect is confirmed in mechanical experiments where an increase in the film tensile modulus is observed with increasing counterion concentration. It is shown for the first time that in case of highly concentrated pectin solutions Mg²⁺ cations also act as a crosslinker for pectin macromolecules.     

The photosensitizing effect of the photoproduct of protoporphyrin IX

The photodynamic effect of a photoproduct of protoporphyrin IX (PpIX) induced by 5-aminolevulinic acid (ALA) was investigated in WiDr cells, a human adenocarcinoma cell line. The fluorescence excitation and emission spectra of PpIX and the photoproduct were measured. After 1, 3 or 5 min exposure of the ALA-incubated cells to 140 mW/cm² light at 635 nm, the photoproduct — the chlorin photoprotoporphyrin (Ppp), had an emission band around 670 nm. The Ppp excitation peak at 670 nm is well separated from the PpIX peak at 635 nm. The outcome of photodynamic therapy (PDT) was determined by measuring intracellular fluorescence intensity of propidium iodide (PI) 2 h following PDT and methylene blue (MB) staining 24 h following PDT. A significant increase in the fluorescence intensity of PI was noted when the ALA-loaded cells were exposed to 670 nm light after exposure to 635 nm, indicating enhanced cell membrane inactivation induced by the photodynamic action of the photoproduct. However, the fraction of the cells that survived following the same treatment as measured by MB staining was not significantly affected based on an analysis of variance. The fluorescence of PpIX decayed significantly during 635 nm light exposure. Exposure to light at 670 nm does not lead to any photodegradation of PpIX. The fluorescence of Ppp was bleached during 670 nm light exposure. Exposure of Ppp at 670 nm gives no PpIX back. Thus, the phototransformation of PpIX to Ppp is probably not a reversible process.     

New antiproliferative 14,15-secopregnane glycosides from Solenostemma argel

Eight new 14,15-secopregnane glycosides, namely argelosides C-J, possessing two ketal functions involved in three five-membered rings, have been isolated from the hairy seeds of Solenostemma argel. Their structures have been established by MS and NMR experiments, combined with quantum mechanical calculations of the ¹³C chemical shifts for the interpretation of the experimental data. On the basis of the obtained results, the structures of argelosides A and B have been revised. Additionally, the effect of these compounds on the VEGF-induced in Kaposi's sarcoma cell proliferation was evaluated. Results indicated that all the compounds reduced the cell proliferation in a dose-dependent manner.     

Microfluidic three-dimensional biomimetic tumor model for studying breast cancer cell migration and invasion in the presence of interstitial flow

Cell migration and invasion are critical steps in cancer metastasis, which are the major cause of death in cancer patients. Tumor-associated macrophages(TAMs) and interstitial flow(IF) are two important biochemical and biomechanical cues in tumor microenvironment, play essential roles in tumor progression. However, their combined effects on tumor cell migration and invasion as well as molecular mechanism remains largely unknown. In this work, we developed a microfluidic-based 3 D breast cancer model by co-culturing tumor aggregates, macrophages, monocytes and endothelial cells within 3 D extracellular matrix in the presence of IF to study tumor cell migration and invasion. On the established platform, we can precisely control the parameters related to tumor microenvironment and observe cellular responses and interactions in real-time. When co-culture of U937 with human umbilical vein endothelial cells(HUVECs) or MDA-MB-231 cells and tri-culture of U937 with HUVECs and MDA-MB-231 cells, we found that mesenchymal-like MDA-MB-231 aggregates activated the monocytes to TAM-like phenotype macrophages. MDA-MB-231 cells and IF simultaneously enhanced the macrophages activation by the stimulation of colony-stimulating factor 1(CSF-1). The activated macrophages and IF further promoted vascular sprouting via vascular endothelial growth factor(VEGFα) signal and tumor cell invasion. This is the first attempt to study the interaction between macrophages and breast cancer cells under IF condition. Taken together, our results provide a new insight to reveal the important physiological and pathological processes of macrophages-tumor communication. Moreover, our established platform with a more mimetic 3 D breast cancer model has the potential for drug screening with more accurate results.     

Dielectrophoresis with 3D microelectrodes fabricated by surface tension assisted lithography

This paper demonstrates the utilization of 3D semispherical shaped microelectrodes for dielectrophoretic manipulation of yeast cells. The semispherical microelectrodes are capable of producing strong electric field gradients, and in turn dielectrophoretic forces across a large area of channel cross‐section. The semispherical shape of microelectrodes avoids the formation of undesired sharp electric fields along the structure and also minimizes the disturbance of the streamlines of nearby passing fluid. The advantage of semispherical microelectrodes over the planar microelectrodes is demonstrated in a series of numerical simulations and proof‐of‐concept experiments aimed toward immobilization of viable yeast cells.     

Improved estimation of duality gap in binary quadratic programming using a weighted distance measure

We present in this paper an improved estimation of duality gap between binary quadratic program and its Lagrangian dual. More specifically, we obtain this improved estimation using a weighted distance measure between the binary set and certain affine subspace. We show that the optimal weights can be computed by solving a semidefinite programming problem. We further establish a necessary and sufficient condition under which the weighted distance measure gives a strictly tighter estimation of the duality gap than the existing estimations.