Characteristics of Subtractive Anodic Stripping Voltammetry of Lead,Cadmium and Thallium at Silver‐Gold Alloy Electrodes

Silver‐gold alloy electrodes have been studied for the purpose of the quantitative determination of heavy metals by subtractive anodic stripping voltammetry, (SASV). The results have been compared with those obtained with the silver and gold electrodes. The 50/50 a/o Ag/Au alloy electrode is the most suitable for quantifying thallium in the presence of lead and cadmium. The separation of its peak from those of lead and cadmium is 200 mV, which is about twice the separation obtained on the pure metal electrodes and is also better than on mercury. The silver electrode is suitable for the simultaneous determination of thallium, lead and cadmium. The peaks of lead and cadmium overlap on the 50/50 alloy. Pure silver or pure gold can be used for simultaneous quantification of these two metals. The use of gold for quantifying lead and cadmium is more limited because the peak potential of cadmium is shifted in the negative direction as its concentration increases and at [Cd²⁺]>200 nM, the two peaks merge. SASV enables correction for background currents and is of utmost importance for obtaining well‐defined peaks. The peaks of lead, cadmium and thallium appear over a relatively narrow potential range (ca. 200 mV) on all the electrodes presented in this work. For this reason, the quantifying of a peak is based on the derivative at the inflection point of only one of its branches (ascending or descending). All SASV measurements were carried out without removal of oxygen.     

In situ metal particle preparation in cross-linked poly(2-acrylamido-2-methyl-1-propansulfonic acid) hydrogel networks

Anionic hydrogels of poly(2-acrylamido-2-methyl-1-propansulfonic acid) (p(AMPS)) were prepared with a different amount of cross-linker extent and used for in situ preparation of magnetic and metal particles. The metal particles with various sizes were obtained inside the three-dimensional polymer matrixes by absorption of the corresponding metal ions from their aqueous solutions followed by the reduction in the presence of strong reducing agent. In addition to iron particles, cobalt, nickel, copper nanoparticles, and CdS, quantum dot has been prepared by utilizing hydrogel matrix as a template for inorganic/organic composite synthesis. It was observed that the amount of cross-linkers (0.5%, 0.75%, and 1% with respect to monomer mole ratio) used in this study for bare p(AMPS) has not significantly influenced the morphology of the hydrogels or the size of the iron particles while having great effect on swelling of p(AMPS) hydrogels in water. Copolymeric hydrogels of AMPS with acrylamide in different composition were also prepared. Thermogravimetric analysis and transmission electron microscopy results showed that the AMPS content of the copolymeric hydrogel has great impact on both the metal ion loading capacity and the size of the resultant metal particles.     

Zur Kenntnis eines Oxoargentato(I)-aurats(III): Ba4AgAuO6

On the Oxoargentato(I)-aurat(III): Ba₄AgAuO₆ The hitherto unknown compound Ba₄AgAuO₆ was prepared by oxidizing Ba/Au/Ag alloy with BaO₂/Ba(OH)₂ mixture in closed Ag tubes. X-ray single crystal investigation led to orthorhombic symmetry space group D-Cmcm; a = 13.275; b = 5.782; c = 11.396 Å; Z = 4. Ba₄AgAuO₆ shows distorted pentagonal bipyramidal polyhedra around Ba²⁺ and square planar AuO₄ polygones. Ag⁺ shows an unusual 2 + 2 coordination by O^2?.     

Preparation and characterization of biodegradable nanoparticles based on amphiphilic poly(3-hydroxybutyrate)-poly(ethylene glycol)-poly(3-hydroxybutyrate) triblock copolymer

Amphiphilic triblock copolymers of poly(3-hydroxybutyrate)-poly(ethylene glycol)-poly(3-hydroxybutyrate) (PHB-PEG-PHB) were directly synthesized by the ring-opening copolymerization of β-butyrolactone monomer using PEG as macroinitiator. Their structure, thermal properties and crystallization were investigated by ¹H NMR, differential scanning calorimetry (DSC) and X-ray diffraction. It was found that both PHB and PEG blocks were miscible. With the increase in the PHB block length, the triblock copolymers became amorphous because amorphous PHB block remarkably depressed the crystallization of the PEG block. Biodegradable nanoparticles with core-shell structure were prepared in aqueous solution from the amphiphilic triblock copolymers, and characterized by ¹H NMR, SEM and fluorescence. The hydrophobic PHB segments formed the central solid-like core, and stabilized by the hydrophilic PEG block. The nanoparticle size was close related to the initial concentrations of the nanoparticle dispersions and the compositions of the triblock copolymers. Moreover, the PHB-PEG-PHB nanoparticles also showed good drug loading properties, which suggested that they were very suitable as delivery vehicles for hydrophobic drugs.     

The preparation and fluorescence properties of europium nanoparticles

A new structured metallic nanomaterial of europium nanoparticle was prepared using tannic acid as the reductive agent,and nanoeuropium protein conjugates were synthesized by the method of lipoic acid modification on the surface of nanoparticle,which opens a new field of application of lanthanides in nanotechniques.Their properties were also characterized by UV-vis absorption spectroscopy,transmission electron microscopy (TEM),and fluorescence spectroscopy.The europium nanoparticle and its protein conjugates solution were stable and water-soluble.The fluorescence intensity of the composite europium nanoparticles was significantly increased in the presence of trace protein,and was linear proportional to the concentration of proteins under optimum conditions.According to this,a fluorimetric method for the determination of protein was developed in this paper.     

Silver(I)‐Selective PVC Membrane Potentiometric Sensor Based on a Recently Synthesized Calix[4]arene

A new PVC membrane potentiometric sensor for Ag(I) ion based on a recently synthesized calix[4]arene compound of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐dihydroxy‐calix[4]arene‐thiacrown‐4 is developed. The electrode exhibits a Nernstian response for Ag(I) ions over a wide concentration range (1.0×10^?2?1.0×10^?6 M) with a slope of 53.8±1.6 mV per decade. It has a relatively fast response time (5–10 s) and can be used for at least 2 months without any considerable divergence in potentials. The proposed electrode shows high selectivity towards Ag⁺ ions over Pb²⁺, Cd²⁺, Co²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Sr²⁺, Mg²⁺, Ca²⁺, Li⁺, K⁺, Na⁺, NH₄⁺ ions and can be used in a pH range of 2–6. Only interference of Hg²⁺ is found. It is successfully used as an indicator electrode in potentiometric titration of a mixture of chloride, bromide and iodide ions.     

Synthesis and characterization of silver nanoparticle/kaolinite composites

Ag nanoparticles were synthetized in the interlamellar space of a layered kaolinite clay mineral. Disaggregation of the lamellae of non-swelling kaolinite was achieved by intercalation of dimethyl sulfoxide. The kaolinite was suspended in aqueous AgNO₃ solution and, after adsorption of Ag⁺, the ions were reduced with NaBH₄. The interlamellar space limits particle growth (d_ave=3.8–4.2 nm); however, larger silver particles may be formed on the exterior surface of kaolinite with d_ave=5.6–10.5 nm diameter. The diameter of the particles prepared in this way is depending on the initial AgNO₃ concentration. The silver nanoparticles prepared were characterized by UV–vis spectroscopy, X-ray diffraction (XRD), Small angle X-ray scattering (SAXS), X-ray photoelectron spectroscopy (XPS) and Transmission electron microscopy (TEM).     

Characteristic of the Ag(bipy) 2 2+ /Ag(bipy) 2 + and Ag(phen) 2 2+ /Ag(phen) 2 + systems in acetonitrile

The values of standard potentials of redox systems formed by the complexes of Ag(II) and Ag(I) with 2,2-bipyridine and 1,10-phenanthroline in acetonitrile have been determined. The properties of the above systems in water and acetonitrile are compared. The possibility of application of these systems for the construction of electrodes with a constant potential in different solvents is discussed.

---

Charakteristik der Systeme Ag(bipy) ₂ ²⁺ /Ag(bipy) ₂ ⁺ und Ag(phen) ₂ ²⁺ /Ag(phen) ₂ ⁺ in Acetonitril

Zusammenfassung Die Standardpotentialwerte der Redoxsysteme, die durch Komplexbildung von Ag(II)- und Ag(I)-Ionen mit 2,2-Bipyridin und 1,10-Phenantrolin gebildet werden, wurden in Acetonitril bestimmt. Die Eigenschaften dieser Redoxsysteme in Wasser und Acetonitril wurden verglichen.Es wurde weiterhin die Möglichkeit der Anwendung dieser Systeme zur Konstruktion einer Elektrode mit unveränderbarem Potential in verschiedenen Lösungsmitteln diskutiert.

     

Silver Selective Electrode Based on Hybrid Mesoporous Silica (MCM‐41) Modified Material

A silver selective electrode based on TEPQA‐MCM‐41 material was developed and used for the selective determination of Ag⁺ ion in various samples. The effect of various plasticizers i. e. dimethyl phthalate (DMP), Tris(ethylhexyl)phosphate (TEP), bis‐(2‐ethylhexyl)sebacate (BEHS), bis‐(2‐ethylhexyl)adipate (BEHA) was investigated. The electrode of the composition of 2 : 1 : 77 : 12 : 8 (w/w, %) of TEPQA‐MCM‐41 : NaTPB : Graphite powder : paraffin oil : DMP respectively, works satisfactorily in a wide concentration range of 1.3×10^?9 M–1.0×10^?1 M for Ag⁺ ion with a lower detection limit (LOD) of 1.0×10^?9 M and has Nernstian slope of 63.4 1 mV/decay. The electrode can be used in a pH range of 2.3 to 6.7 for a period of 3 months without any divergence in potential response. The selectivity coefficient calculated by fixed interference method indicates the high selectivity of the electrode towards Ag⁺ ion over other tested cations.     

Structural and Spectroscopic Studies of Halocuprate(I) and Haloargentate(I) Complexes [M2XnX′4−n]2−

The complexes [Cu₂Br₄]^2?, [Cu₂I₄]^2?, [Cu₂I₂Br₂]^2?, [Cu₂I₃Cl]^2?, [Ag₂Cl₄]^2? have been characterized as their isomorphous bis(triphenylphosphoranylidene)ammonium ([Ph₃PNPPh₃]⁺ = PNP⁺) salts by single crystal structural determinations. All anions show the centrosymmetric doubly halogen‐bridged forms [XM(μ‐X)₂MX]^2? with three‐coordinate metal atoms that have been observed in [M₂X₄]^2? complexes with other large organic cations. In [Cu₂I₂Br₂]^2? the iodide ligands occupy the bridging positions and the bromide the terminal positions, while in [Cu₂I₃Cl]^2?, obtained in an attempt to prepare [Cu₂I₂Cl₂]^2?, two of the iodide ligands occupy the bridging positions with the third iodide and the chloride ligand occupying two statistically disordered terminal positions. In [Ag₂Cl₄]^2? the distortion from ideal trigonal coordination of the metal atom is greater than in the copper complexes, but less than in other previously reported [Ag₂Cl₄]^2? complexes with organic cations. The ν(MX) bands have been assigned in the far‐IR spectra, and confirm previous observations regarding the unexpectedly simple IR spectra of [Cu₂X₄]^2? complexes.