二硫代氨基甲酸螯合树脂化学修饰电极的制备及银离子的测定

将纯石墨电极经三氧化二铝抛光与浓硝酸和浓硫酸(1+1)混合酸使其极性化,之后于1 g·L-1聚氯乙烯(PVC)环己酮溶液10μL中浸渍片刻,取出,用红外灯照射烘干30 min,冷却后,将电极置于含有哌嗪、K3PO4及二甲基甲酰胺(DMF)(2:1:8)的混合液中使其反应;最后在氢氧化钠存在下与二硫化碳反应,用水洗至中性,即制成修饰有二硫代氨基甲酸螯合树脂的石墨电极,将其用于银的测定。与未修饰的电极相比此电极具有较高的灵敏度和较好的选择性,在1．0×10-8～1．0×10-5mol·L-1范围内,峰电流与浓度呈线性关系,检出限为5．0×10-9mol·L-1。     

Spectroscopic studies on 2,3,4,5-tetraphenylpyrylium salts with and without silver (I)-bridged structures

Two novel phenylated pyrylium compounds, silver (I)-bridged 2,3,4,5-tetraphenylpyrylium perchlorate (P1) and its silver (I)-free pyrylium ligand (P2) were prepared from 1,2,3,4-tetraphenylcyclopentadiene to examine their spectroscopic behaviors. The UV/vis absorption and fluorescent emission spectra of P1 and P2, measured in three solvents (acetonitrile, dichloromethane and toluene), reveal that the photophysical behaviors are closely related to silver (I) fragment, and strongly dependent on solvent polarity. In polar acetonitrile, P1 displays longer absorption wavelength and much lower fluorescent emission intensity than P2, although they exhibit much similarity in shape. In contrast, in nonpolar toluene, while P2 shows an apparent absorption band at 338 nm, P1 displays a tail-like line without absorption band observed. All the spectra obtained indicate a better coplanarity and a stronger intra-molecular charge transfer in P1 due to the effect of silver (I) fragment. Additionally, the 1H NMR spectra of P1 and P2, which were recorded under the same conditions, indicate that the silver (I) fragment reinforces pyrylium ring's capacity to localize the formal positive charge within the heterocyclic ring.     

偶氮染料在酸性介质中的电还原性质

研究了4个偶氮染料在酸性介质中的电还原性质。偶氮基在酸性介质中的还原均为不可逆四电子一步全还原。邻、对位上有吸电子基(如—CO_2Bu-n)的偶氮基较间位有吸电子基时更易被还原。分子中同时含有偶氮基和硝基时,偶氮基先被还原。     

银微电极微分电位溶出分析法研究

本文首次报道了银微电极微分电位溶出分析法。用化学刻蚀法方便地制作了银微电极，用于ＤＰＳＡ具有背景值低，分辨率好、精密度及灵敏度高，在不搅拌，仅需一定酸度而酸度而无其它介质的条件下就能测试等优点，对人工试样及自来水样分析，结果令人满意。     

ANISOTROPIC STRAIN EFFECT ON MORPHOLOGY AND ATOMIC STRUCTURE OF VICINAL Si(001) SURFACE

On vicinal Si(001) surfaces, dependence of growth morphology on the applied strain direction and formation of vacancy lines from Ag-induced missing dimer vacancies are studied. Both phenomena are intimately related to the anisotropic nature of the strain field which originates from the surface dimerization. Strain relief mechanism, reflecting on the surface morphology, is shown to be different in two orthogonal directions. Normal to the steps, step-pair bunching and waving lead to formation of hillocks and pits. Along the step direction, bending of step pairs forms a cusp which later develops into a deep groove. Toward the atomic scale, the formation of the vacancy lines is driven by the short-range attractive interaction between the vacancies in adjacent dimer rows and the long-range repulsive interaction between them in the same dimer row. A full form and magnitudes of the interactions are derived from the thermally-excited wandering of the vacancy lines formed by a nominal amount of Ag depositing onto the surface.     

C1/Ag(111)体系研究 Ⅳ.氯吸附对甲醇吸附氧化的影响

运用HREELS技术对甲醇在预吸附氯的Ag(111)表面上的吸附氧化行为进行了较细致的研究.结果证明Cl对甲醇氧化的影响缘于它在Ag(111)上的吸附所引起的表面结构的改变进而改变表面氧吸附物种,从而使得甲醇氧化的中间产物发生变化.实验结果说明甲醇在Ag(111)和低暴露量氯吸附的Ag(111)表面上的氧化行为是相似的,检测到了中间产物Ⅰ和Ⅲ;在高暴露量氯吸附的Ag(111)上甲醇氧化时则产生中间产物Ⅰ、Ⅳ和甲醛物种.对上述不同的甲醇氧化行为作了分析,并指出了以前人们在考察甲醇氧化机理时只考虑原子氧作用的片面性.     

Continuous flow and flow injection stripping voltammetric determination of silver(I), mercury(II), and bismuth(III) at a bulk modified graphite tube electrode

The epoxy-impregnated graphite tube electrode bulk modified with 2-mercaptobenzoxazole, employed in a wall-jet configuration, was found to be useful for the continuous flow and flow injection stripping voltammetric determinations of Ag^I, Hg^II and Bi^III. For continuous flow, detection limits for Ag^I, Hg^II and Bi^III were 1.8 × 10⁻¹⁰ M, 1.9 × 10⁻⁹ M and 9.5 × 10⁻⁹ M, respectively (10 min accumulation, S/N = 3). Precisions for 5.00 × 10⁻⁹ M Ag^I, 1.00 × 10⁻⁸ M Hg^II and 1.00 × 10⁻⁷ M Bi^III were 10.5%, 5.77 % and 7.90% (relative standard deviations, n = 6), respectively. In the case of flow injection stripping, with a 500 μL injection loop, detection limits of 0.59 ng, 2.0 ng and 120 ng were obtained for Ag^I, Hg^II and Bi^III, respectively (S/N = 3). Selected metal ions, inorganic and organic substances were investigated for interferences. The electrode was tested with a certified sample and then applied to the determinations of the metal ions in a urine and a sea-water sample.     

三维银配位聚合物[Ag3(IN)2(CF3COO)]的水热合成与晶体结构

本文在水热条件下, 通过4-氰基吡啶发生原位水解得到异烟酸, 将其与AgCF3CO2作用合成了新型银配位聚合物, 并通过元素分析和X射线单晶衍射分析等手段对其结构进行了表征.