Determination of traces of bismuth by quenching of solid-substrate room-temperature phosphorescence from morin-labeled silicon dioxide nano-particles

Silicon dioxide nano-particles, diameter 50 nm, containing morin (morin–SiO₂) have been synthesized by the sol–gel method. They emit strong and stable room-temperature phosphorescence (SS-RTP) on filter paper as substrate, and bismuth can quench the intensity of the SS-RTP. On this basis a new morin–SiO₂ solid-substrate room-temperature phosphorescence-quenching method has been established for determination of traces of bismuth. Reduction of phosphorescence intensity (I_p) is directly proportional to the concentration of bismuth in the working range 0.16–14.4 ag spot^–1 (sample volume 0.40 L spot^–1, corresponding to the concentration range 0.40–36.0 fg mL^–1). The regression equation of the working curve is I_p=14.86+5.279×[Bi³⁺] (ag spot^–1) (n=6, r=0.9982). The detection limit of this method is 0.026 ag spot^–1 (corresponding to a concentration of 6.5×10^–17 g mL^–1).This sensitive, reproducible and accurate method has been used for successful analysis of real samples.     

Synthesis, characterization and thermal properties of novel epoxy containing silicon and phosphorus nanocomposites by sol-gel method

Organic-inorganic hybrids were prepared using diglycidyl ether of bisphenol A (DGEBA) type epoxy and tetraethoxysilane via the sol-gel process. The DGEBA type epoxy was modified by a coupling agent to improve the compatibility of the organic and inorganic phases. The sol-gel technique was used successfully to incorporate silicon and phosphorus into the network of hybrids increasing flame retardance.Fourier transform infrared spectroscopy and ²⁹Si nuclear magnetic resonance spectroscopy were used to characterize the structure of the hybrids. In condensed siloxane species for TEOS, silicon atoms through mono-, di-, tri-, and tetra-substituted siloxane bonds are designated as Q¹, Q², Q³, Q⁴, respectively. For 3-isocyanatopropyltriethoxysilane and diethylphosphatoethyltriethoxysilane, mono-, di-, tri-, tetra-substituted siloxane bonds are designated as T¹, T², T³. Results revealed that Q⁴, Q³, T³ are the major environments forming a network structure. The morphology of the ceramer was examined by scanning electron microscopy and Si mapping. Particle sizes were below 100 nm. The hybrids were nanocomposites. The char yield of pure epoxy resin was 14.8 wt.% and that of modified epoxy nanocomposite was 31 wt.% at 800 °C. A higher char yield enhances the flame retardance. Values of limiting oxygen index of pure epoxy and modified epoxy nanocomposites are 24 and 32, respectively, indicating that modified epoxy nanocomposites possess better flame retardance than the pure epoxy resin.     

Thermoelastic stresses in SiC single crystals grown by the physical vapor transport method

A finite element-based thermoelastic anisotropic stress model for hexagonal silicon carbide polytype is developed for the calculation of thermal stresses in SiC crystals grown by the physical vapor transport method. The composite structure of the growing SiC crystal and graphite lid is considered in the model. The thermal expansion match between the crucible lid and SiC crystal is studied for the first time. The influence of thermal stress on the dislocation density and crystal quality is discussed. The project supported by the National Natural Science Foundation of China (10472126) and the Knowledge Innovation Program of Chinese Academy of Sciences. The English text was polished by Keren Wang     

基于重叠栅工艺的硅量子点阵列的制备与调控

利用半导体量子点阵列结构实现近邻耦合是规模化扩展自旋量子比特的主要方案之一.随着量子点数目的增加,量子点阵列器件的制作工艺及参数调控均愈加复杂.本文介绍了一种重叠栅工艺结构,利用多层相互重叠且具有不同功能的栅极定义量子点,制作出结构紧凑、调控性好的量子点阵列器件,解决了工艺扩展的难题.此外,本文发展了一套高效可靠的调控方法,按顺序逐个添加量子点并建立虚拟电极,实现了对量子点参数的独立控制,并且能够高效且独立地调控各量子点中的电子数目,克服了大规模量子点阵列中电压参数配置的困难.这些方法为未来实现大规模自旋比特阵列提供了一种标准化的方案.     

Functional Monomers and Polymers. 145. Synthetic Application Based on the Tautomerism of Polymer-Bound Purine and Pyrimidine Bases

Polymer-bound alkylthiopurine and -pyrimidine bases were prepared and used as the polymeric reagents for the reactions of nitrile, olefin, and enone formation. The corresponding low molecular weight compounds were also prepared for comparison. Differences in the reactivity of these reagents were related to the change in tautomerism of the purine and pyrimidine moieties.     

Magnetization switching modes in nanopillar spin valve under the external field

The current-induced magnetic switching is studied in Co/Cu/Co nanopillar with an in-plane magnetization traversed under the perpendicular-to-plane external field.Magnetization switching is found to take place when the current density exceeds a threshold.By analyzing precessional trajectories,evolutions of domain walls and magnetization switching times under the perpendicular magnetic field,there are two different magnetization switching modes:nucleation and domain wall motion reversal;uniform magnetization ...     

Oxide reduced silicon nanowires

Core crystalline silicon nanowires with a heavily reduced amorphous shell have been successfully synthesised using palladium as a metal catalyst. We present two approaches to reduce the oxidation of the nanowires during the thermal annealing growth. The ratios of the amorphous shell to crystalline core of the nanowires produced, from the two methods, are compared and show a remarkable drop (hence thinner oxide) compared to wires fabricated using currently available techniques. In addition, a focused ion beam was utilised to contact the oxide-reduced nanowires for transport measurements, without first removing the thin oxide shell. The oxygen-reduced core-shell silicon nanowires showed a very low electrical resistivity (4 × 10⁻¹ Ω cm). Our novel approach presents a new alternative to the production of low cost, high yield, highly conducting silicon nanowires offering a wide range of opportunities for semiconductor based technology.     

Influence of Carbon Multiple Treatments on the Photoelectrical Properties of Porous Glasses

We have studied the influence of multiple carbon treatments on the properties of silica porous glasses. Each step of each carbon treatment started with filling the voids of porous glass with carbon. During the following anneal carbon interacted with the walls of the voids. It was shown that low dimensional silicon clusters were formed inside the voids as a result of this reaction. In the experiments the photoluminescence spectra and conductivity of carbon-processed specimens were measured. The size-distribution of voids in porous glasses was calculated from absorption—desorption isotherms. An original technique was proposed that allowed to obtain the size-distribution of silicon clusters from the positions of peaks in the photoluminescence spectra. Correlation between the photoluminescence intensity and the sizes of pores was revealed. The observed oscillations in the shapes of the photoluminescence spectra in subsequent cycles of carbon treatment are explained by changes of the number of clusters corresponding to definite peaks in the size distribution spectra.     

Measurements of the optical absorption coefficient of Ar8+ ion implanted silicon layers using the photothermal radiometry and the modulated free carrier absorption methods

This paper presents a method of the measurement of the optical absorption coefficient of the Ar⁸⁺ ions implanted layers in the p-type silicon substrate. The absorption coefficient is calculated using a value of the attenuation of amplitudes of a photothermal radiometry (PTR) and/or a modulation free carrier absorption (MFCA) signals and the implanted layer thickness calculated by means of the TRIM program. The proposed method can be used to indicate the amorphization of the ions implanted layers.     

Rapid synthesis and characterization of silicon substituted nano hydroxyapatite using microwave irradiation

Nano sized hydroxyapatites with silicon substitution of three different silicon concentrations were successfully prepared first time by a rapid microwave assisted synthesis method, with a time saving and energy efficient technique. The effects of the Si substitution on crystallite size, particle size and morphology of the powders were investigated. The crystalline phase, microstructure, chemical composition, and morphology and particle size of hydroxyapatite and silicon substituted hydroxyapatites were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and dynamic light scattering. The crystallite size and particle size decreases with increase in silicon content and particle morphology spheroidal for pure hydroxyapatite changes to elongated ellipsoidal crystals while silicon substitution increases. Fourier Transform Infrared Spectroscopy analysis reveals, the silicon incorporation to hydroxyapatite lattice occurs via substitution of silicate groups for phosphate groups. Substitution of phosphate group by silicate in the apatite structure results in a small increase in the lattice parameters in both a-axis and c-axis of the unit cell.