Surface recombination in breakdown time delay experiments: Effect of different cathode materials

The late afterglow in nitrogen with iron electrode is studied by the breakdown time delay method, i.e., by measuring the breakdown time delay t_d as a function of the afterglow time . It is proposed that the cause of the secondary electrons initiating the breakdown is the energy of the surface recombination of nitrogen atoms on the iron electrode. The gas-phase and macrokinetic diffusive models are used to describe the experimental breakdown time delay data. By fitting the theoretical curve to the experimental data: (1) it has been confirmed that the recombination on the molybdenum glass is of the second order and the value of the surface recombination coefficient is determined at 4 mbar; (2) it has been shown that the surface recombination on the iron electrode is of the second order, and the effective recombination coefficients are determined; (3) the analytical form of the recombination coefficient as a function of the adsorption characteristics of surfaces and the pressure of the parent gas has been derived. In addition, the orders of surface recombination on the molybdenum-, aluminum-, and gold-plated electrode were determined by the same method.     

原子吸收光谱法测定拉伸断口铬镍钼钛钢样品中主成分

研究了毫克级铬镍钼风样品中主成分镍的火焰原子吸收光谱法（FAAS法）和铬、钼、钒、钛、铝的塞曼恒温平台石墨炉原子吸收光谱法（ZSTPF－AAS法）。采用了微波溶样技术作为防污染样品预处理技术，采用石墨管硅涂层改进技术提高了仪器的测试精度。其中铬、镍、钼、钒、钛、铝的相对标准偏差分别为2.7%,0.97%,8.6%,7.3%,1.7%,7.3%。其加标回收率分别为96.5%,97%,96.7%,93%,98%,91%。通过分析，发现在较低温度下铬镍钼钛钢断面上有轻微的钼偏析现象，可能是拉伸断裂的主要化学影响因素。     

A flow injection-ETAAS system for the on-line determination of total and dissolved silica in waters

In this work total (Si-tot) and ‘soluble’ or reactive (Si-sol) concentrations of silicon in natural and tap waters were sequentially determined by electrothermal atomic absorption spectrometry (ETAAS). First, samples were on-line diluted based on the merging-zone principle in order to allow the determination of Si-tot within the 300–1000 μgSi l⁻¹ range. After the dilution process, a sub-sample was collected in the capillary of a sampling arm assembly (SAA). Thereafter, samples were subject to a precipitation/dissolution process in order to allow the determination of Si-sol within the 280–850 μgSi l⁻¹. Si-sol was precipitated with ammonium chloride and collected on the walls of a knotted coil. The precipitate was dissolved with ammonium molybdate in an acidic medium (HNO₃) and a sub-sample was then collected in the SAA. In both cases, 10 μl volumes of the sub-sample were injected into the atomizer with the previous introduction of 20 ng of Eu as chemical modifier (10 μl) by the spectrometer autosampler. The recovery values obtained with natural waters spiked samples were over 46% and the agreement between observed and certified samples values was good. The proportion of Si-sol in comparison with the Si-tot was high (85–95%) in most natural waters. The precision of the method was 2.4–3.5 and 4.5–6.2% (n=10) for the determination of Si-tot and Si-sol, respectively.     

一阶导数吸光光度法同时测定纯硅中铁和铝的研究

提出了用一阶导数光光度法同时测定铁和铝的方法，在ｐＨ６．５乙二胺缓冲溶液中，乳化剂ＯＰ存在下，Ｆｅ＾３＋Ａｌ＾３＋与络天青Ｓ形成Ｆｅ＾３＋，Ａｌ＾３＋－ＣＡＳ－ＯＰ三元络合物，络合物一阶导数光谱等吸收点分别在６０６．２，６３８．０ｎｍ记录混合体系在两波长处一阶导数数值可以分别测定铝，铁含量，互不影响，铁，铝含量分别在１．０～１６μｇ／２５ｍｌ，０．３～１０μｇ／２５ｍｌ范围内呈良好线性，用于测定纯     

Novel radial oligothienyl silanes

A series of thiophene-based homologues with a silicon core surrounded by mono-, bi-, terthiophene, and their derivatives with alkylsilyl linkages has been prepared using hydrosilylation and Stille coupling methods.     

氮化硅在超声波辐照下的水解

氮化硅(Si3N4)是近三四十年发展起来的一种新型陶瓷材料,应用广泛[1-3],化学性质特别稳定,一般情况下难以发生反应,鲜有人研究其化学性质。有研究[3]指出氮化硅在磨擦条件下能与水发生如下反应:Si3N4+6H2O→3SiO2+4NH3,但却无人专门定量地研究过氮化硅在水溶液中的反应性能,为此本文研究了氮化硅在超声波辐照条件下的水解情况,并且还和强力搅拌条件下的结果进行了对比。1　实验部分1 1　主要仪器与试剂超声波清洗器(KQ-218型,KQ-250B型,CX-250型,CK-25-06型)BF-101B型磁力搅拌器,72型分光光度计,氮化硅(>99 9%,α Si3N4>95%)…     

Effects of fluorine atoms on the optical nonlinear response of stilbene derivatives

The effect of fluorine atoms on the second-order optical nonlinear response of 4-nitro-4′-methoxy-trans-stilbene and polyene derivatives containing up to three double bonds (n=1, 2, 3) has been investigated within a semiempirical context (PM3 Hamiltonian). Experimental data reported in literature indicate a β_vec(SHG) value of 34, 47 and 76 (×10⁻³⁰ esu) for n=1, 2, 3, respectively, at 0.65 eV in CHCl₃ solutions. Our calculations show that fluorinating the nitrophenyl group the β_vec(SHG) is doubled. Further increase in the second-order nonlinear response can be obtained fluorinating the CC bond linkers between the aromatic moieties.Besides, the effect of different donor-acceptor pairs has been studied and the results interpreted in the two-state model context.Some results concerning the third-harmonic generation (THG), γ (THG), are presented, and a possible interpretation proposed.     

Hydrogen–hydrogen bonding in biphenyl revisited

The evidence for the stabilizing nature of the H–H bonding in planar biphenyl is succinctly reviewed. The stabilizing nature of the H–H bonding is revealed through a comparison of the atomic energy of every atom in planar biphenyl with the same atom in the twisted equilibrium structure. It is shown that the barrier to rotation via the planar transition state is the net resultant of a stabilisation of the four ortho-hydrogen atoms (by 8 kcal/mol each), a stabilisation of the two para-carbon atoms (by 3 kcal/mol each) and by the dominant destabilisation of the two carbon atoms joining the two rings—the two junction carbon atoms—(by 22 kcal/mol each). The energetic stabilisation of the four ortho-hydrogen atoms is further shown to be in large proportion due to the formation of the hydrogen–hydrogen interatomic surface. Furthermore, neither the “bond order” between the two junction carbon atoms nor the total electron delocalisation between the two rings exhibit a significant change in going from the planar to the twisted equilibrium geometry. These findings are in contrast with the classical view of a balance between “steric non-bonded repulsion” and better electron delocalisation as a function of the twist dihedral angle. Similar conclusions have been recently reached by Pacios and Gómez through a study of the electrostatic potential at the position of the hydrogen nuclei. We dedicate this article to Professor TM Krygowski on the occasion of his 70th birthday wishing him a long and productive life.     

一氧化二氮—乙炔火焰原子吸收法测定镍—镉浸渍液中硅

提出用一氧化二氮-乙炔火焰原子吸收法分析镍-镉浸渍液中硅.方法具有良好的灵敏度,干扰少,重现性好.硅量在5～50μg.ml~(-1)范围内与吸光度呈线性关系.测定样品中硅34.0μg.ml~(-1)(n=10)时,相对标准偏差为2.2%.标准加入回收率在98%～103%范围内,适用于镍-镉浸渍液中硅的分析.     

A density-functional calculation of dynamic dipole polarizabilities of noble gas atoms

Using a very simple trial function and unperturbed electron densities calculated by a new procedure, the frequency-dependent dipole polarizability () of Ne, Ar, Kr and Xe has been calculated in the range 0 0.45 a.u., by a Karplus-Kolker-type variation-perturbation method. Results progressively worsen for larger systems so that, for Xe, (0) is only 75% of the experimental value. Probable reasons for this are discussed.