立体发光LED灯片的光学性能研究

立体发光灯片的关键是在保证光通量的前提下,如何获得均匀的正反面发光.本文对3种荧光粉平面涂覆立体灯片的正面和反面的瞬态和稳态光通量、色温、色品坐标进行了研究,发现直接涂覆荧光粉胶的灯片总的光通量最大,但正反面的发光性能相差很大;在涂覆荧光粉之前先平面涂覆一层硅胶,可获得正反面发光较均匀的灯片;而在该硅胶层内掺杂扩散粉的灯片,不但没有提高灯片的正反面发光均匀度,反而大幅度降低了光通量值.此外,测试3种样品的发光角度,发现其发光角度分布相似,而发光强度与积分球测试的光通量比值相近.结果表明,涂覆荧光粉之前先平面涂覆一层硅胶工艺,既可以保证立体发光灯片具有较大的光通量又可以获得均匀的正反面发光.     

Sensitive pseudobienzyme electrocatalytic DNA biosensor for mercury(II) ion by using the autonomously assembled hemin/G-quadruplex DNAzyme nanowires for signal amplification

Herein, a novel sensitive pseudobienzyme electrocatalytic DNA biosensor was proposed for mercury ion (Hg²⁺) detection by using autonomously assembled hemin/G-quadruplex DNAzyme nanowires for signal amplification. Thiol functionalized capture DNA was firstly immobilized on a nano-Au modified glass carbon electrode (GCE). In presence of Hg²⁺, the specific coordination between Hg²⁺ and T could result in the assembly of primer DNA on the electrode, which successfully triggered the HCR to form the hemin/G-quadruplex DNAzyme nanowires with substantial redox probe thionine (Thi). In the electrolyte of PBS containing NADH, the hemin/G-quadruplex nanowires firstly acted as an NADH oxidase to assist the concomitant formation of H₂O₂ in the presence of dissolved O₂. Then, with the redox probe Thi as electron mediator, the hemin/G-quadruplex nanowires acted as an HRP-mimicking DNAzyme that quickly bioelectrocatalyzed the reduction of produced H₂O₂, which finally led to a dramatically amplified electrochemical signal. This method has demonstrated a high sensitivity of Hg²⁺ detection with the dynamic concentration range spanning from 1.0 ng L⁻¹ to 10 mg L⁻¹ Hg²⁺ and a detection limit of 0.5 ng L⁻¹ (2.5 pM) at the 3S_blank level, and it also demonstrated excellent selectivity against other interferential metal ions.     

多次放电的激光诱导击穿光谱信号增强

激光诱导击穿光谱技术(LIBS)是一种广泛应用于科学和工程方面的元素分析技术。LIBS测量一些微量元素时存在探测极限高的不足,因此增强LIBS信号强度,降低元素探测极限,对扩展其应用范围有着重要的意义。为了实现LIBS光谱信号的增强,提出多次放电增强激光诱导击穿光谱方法,并以固体铝合金材料为例进行了光谱信号强度增强的研究。实验发现,激光作用在铝合金材料上烧蚀样品产生等离子体并溅射到样品上方高压放电电极所在区域,该区域在等离子体产生之后50 μs之内均可以诱导高压电极放电。因此采用高频脉冲电源可以实现一次LIBS产生的等离子体诱导电极多次放电。多次放电会对等离子体进行多次激发,同时多次放电对等离子的加热作用会延缓等离子体冷却速率从而延长等离子体的持续时间,两者共同作用可以增强LIBS光谱信号强度,进而降低LIBS对微量元素的探测极限。使用频率为100 kHz的高频直流脉冲电源,利用数字延迟脉冲发生器同步激光与高压电源,在激光过后3.6 μs触发高压放电,一次LIBS产生的等离子体可以诱导电极5次放电,即对等离子体进行5次激发和加热。利用光谱仪对5次放电等离子体光谱进行积分测量。实验结果表明：使用多次放电增强之后,等离子体持续时间得到大幅延长,光谱信号强度得到大幅增强,其中,Mg Ⅱ (~279 nm)的信号强度可以增强约48倍,Al Ⅱ (~358 nm)的信号强度可以增强约72倍,微量元素Mn Ⅰ (~403 nm)的信号强度增强约6.3倍,微量元素Cu Ⅰ (~403 nm) 的信号强度增强约8.3倍。Mn Ⅰ (~403 nm)和Cu Ⅰ (~403 nm) 的探测极限分别降低为LIBS单次放电的1/6和1/8。多次放电增强激光诱导击穿光谱方法很好地增强了LIBS的光谱信号强度,降低了对微量元素的探测极限,扩展了LIBS技术的应用范围。该方法有潜力应用到贵重物品、稀有材料及文物的鉴定之中。     

智能化车辆光度测试系统的研制

本文介绍了一种自动测试汽车车灯配光性能仪器的设计原理、结构框图和精度分析。仪器采用微机控制、自动完成定位、数据采集、标准判别和表格打印。经实际使用表明：仪器具有较高精度，其转动定位精度达到０．０１°，照度测试精度不大于２％，完全满足国标对车灯性能测定的要求     

Optimizing thermography depth probing with a dynamic thermal point spread function

Derivation of two point spread functions PSFs suitable for infrared thermograms analysis is illustrated, based on two unique approaches, one based on depth decaying limit and one on diffusion limit. Experimental work using PMMA sample with back drilled holes and pulsed thermographic routine is utilized to show the effectiveness of deconvoluting pixel temperature transient history with suggested PSF’s. Synthetic second time derivative thermograms are utilized for comparison and the signal to noise ratio is used as a figure of merit for quantification.     

On timing Jitter in wavelength-division multiplexed soliton systems

Collision-induced timing shifts in a wavelength-division multiplexed soliton system are computed when damping, amplification, filtering and positive dispersion management following the loss profile are included. A statistical analysis is presented which takes into account the resulting effect of the large number of collisions occurring in the fiber. Analytic expressions are derived for the root mean square timing jitter and the maximum length of error-free transmission with an arbitrary number of channels. An extensive analysis of system performance corresponding to situations with and without filters and/or dispersion management is carried out.     

Fuzzy logic based intersection delay estimation

A fuzzy logic based delay estimation system is proposed and modelled. Conventional method of delay study involves solving static engineering equations in which only technical factors (traffic demand, roadway geometry, and signal control, etc.) are considered and the affect of nontechnical factors (such as weather or visibility) cannot be analyzed since they do not follow a predefined process. The fuzzy logic based delay estimation combines the complex technical and nontechnical factors and is adaptive to the changing driving environment. The rule base of the delay estimation system is constructed either following a mathematical model or from real-time traffic operational data. Simulation and field test of the fuzzy system have shown that fuzzy logic based modelling is a promising approach to improving intersection delay estimation.     

蚊蝇杀灭器及其发射光谱分析

文章首先介绍了蚊蝇杀灭器在佛山市两个单位的职工饭堂厨房和会议室或值班室的试验情况。然后围绕文中四个图说明了下面四个问题：一，展示了进行光谱分析的测量装置。二，将蚊蝇杀灭器黑光灯的发射光谱和日用荧光灯发射光谱作分析比较。三，指出黑光灯也是一种荧光灯，说明了它的发光机理。四，展示了国外一种高效黑光灯的发射光谱，它是用活性铈钙磷酸脂做荧光涂料，我们进一步深入探讨了这种黑光灯的发光机制，并介绍了它的其他用     

高亮度搪瓷交流电致发光屏的研究

本文报导了通过改进珐琅介质的介电性能,并采用特殊的灼烧工艺,获得高亮度.长寿命的搪瓷交流电致发光(AC—EL)屏的方法。     

新型晶体Nd:S-VAP激光特性研究

测量了 Nd:S-VAP[Nd:Sr₅(VO₄)₃F]晶体的吸收光谱特性,在583.0nm 和809.0nm处有强烈的吸收峰.用可调谐染料激光泵浦实现了低阈值、高效率的激光运转.在透射率15%的平-平腔情况下,斜率效率为50%,阈值2mJ,倍频绿光的中心波长为536.0nm,线宽为1.4nm.采用φ4mm×30mm 的氙灯泵浦,实现了自由运转和染料片调 Q 运转.阈值为130mJ,斜效率为1.3%.测量了不同腔长、不同染料片小信号透射率情况下的输出能量、脉冲宽度以及光束发散角和偏振特性等.