推移质运动的动力学模型

近底水充中推移质的输称属于固液二相流问题,本文针对固相推移质具有的随机和力学双重特性,通过类似分子运动论中Boltzmann方程的推导方法,建立起推移质运动的控制微分方程,其中碰撞项主要考虑推移层颗粒与床面层颗粒的碰撞效应,据此获得推移质输移问题的固液二相流模型－－动力学模型,将推移质通量与所受外力联系起来,便于揭示推移质运动的力学本质,开辟推移质理论研究的新途径。     

生产井开发指标的分层分方向定量计算方法

针对注水开发的多层砂岩油藏分层动态分析难度大等问题,在常规井层开发指标计算基础上,结合动、静态劈分方法,综合考虑渗透率、孔隙度、地层系数、含水饱和度、位置系数、措施系数及注水量系数,提出了一种既可将油、水井作为统一整体,又可对小层、方向流动分量开发指标进行定量计算的体现渗流力学本质的方法。用大庆油田N2-O1井组的产液剖面资料进行验证。结果表明,所提方法的计算结果与测量结果吻合度较高,精度平均值达75.11%。用该方法计算开发指标,适用性强,能较真实地反映各小层、各方向的产液情况,对现场应用具有指导意义。     

新型固体氧化物燃料电池连接件的结构设计与数值仿真

离散型连接件构成的固体氧化物燃料电池结构中存在反应气体容易产生涡流和较小压降等问题, 影响电池的输出功率. 本文基于COMSOL Multiphysics仿真平台, 建立离散型连接件的固体氧化物燃料电池的三维模型进行数值仿真模拟. 考虑其气体流量、组成、质量以及电化学反应过程, 研究离散型连接件电池阳极和阴极内反应气体的流速、流道阻力和浓度对电池工作性能的影响, 并与相同工况下的平直流道型连接件的固体氧化物燃料电池三维模型进行比较. 结果表明: 离散型连接件的固体氧化物燃料电池流道内的气体流速较大, 气体浓度下降较慢, 有较强的流道传质能力, 与平直流道型连接件的固体氧化物燃料电池相比, 离散型连接件电池的最大输出功率提升了61.27％.     

统一的对流扩散型可压缩流体力学方程与解法

流体力学的动量方程、能量方程、湍动能方程和耗散方程都具有对流扩散方程的形式,但连续方程却不是对流扩散型的。对于可压缩问题,本文通过合理的数学推导,不作任何近似、假定与简化,得到一个全新的连续方程形式．该连续方程以压力为未知变量,并具有对流扩散型形式,使得所有的流体动力学方程组都具有完全统一的方程形式,给出了这种三维对流扩散方程组的有限精确差分计算格式。对流体力学的进一步发展具有一定意义．     

Anti-diffusion method for interface steepening in two-phase incompressible flow

In this paper, we present a method for obtaining sharp interfaces in two-phase incompressible flows by an anti-diffusion correction, that is applicable in a straight-forward fashion for the improvement of two-phase flow solution schemes typically employed in practical applications. The underlying discretization is based on the volume-of-fluid (VOF) interface-capturing method on unstructured meshes. The key idea is to steepen the interface, independently of the underlying volume-fraction transport equation, by solving a diffusion equation with reverse time, i.e. an anti-diffusion equation, after each advection time step of the volume fraction. As the solution of the anti-diffusion equation requires regularization, a limiter based on the directional derivative is developed for calculating the gradient of the volume fraction. This limiter ensures the boundedness of the volume fraction. In order to control the amount of anti-diffusion introduced by the correction algorithm we propose a suitable stopping criterion for interface steepening. The formulation of the limiter and the algorithm for solving the anti-diffusion equation are applicable to 3-dimensional unstructured meshes. Validation computations are performed for passive advection of an interface, for 2-dimensional and 3-dimensional rising-bubbles, and for a rising drop in a periodically constricted channel. The results demonstrate that sharp interfaces can be recovered reliably. They show that the accuracy is similar to or even better than that of level-set methods using comparable discretizations for the flow and the level-set evolution. Also, we observe a good agreement with experimental results for the rising drop where proper interface evolution requires accurate mass conservation.     

First-order system least squares and the energetic variational approach for two-phase flow

This paper develops a first-order system least-squares (FOSLS) formulation for equations of two-phase flow. The main goal is to show that this discretization, along with numerical techniques such as nested iteration, algebraic multigrid, and adaptive local refinement, can be used to solve these types of complex fluid flow problems. In addition, from an energetic variational approach, it can be shown that an important quantity to preserve in a given simulation is the energy law. We discuss the energy law and inherent structure for two-phase flow using the Allen–Cahn interface model and indicate how it is related to other complex fluid models, such as magnetohydrodynamics. Finally, we show that, using the FOSLS framework, one can still satisfy the appropriate energy law globally while using well-known numerical techniques.     

Car Deceleration Considering Its Own Velocity in Cellular Automata Model

In this paper, we propose a new cellular automaton model, which is based on NaSch traffic model. In our method, when a car has a larger velocity, if the gap between the car and its leading car is not enough large, it will decrease. The aim is that the following car has a buffer space to decrease its velocity at the next time, and then avoid to decelerate too high. The simulation results show that using our model, the car deceleration is realistic, and is closer to the field measure than that of NaSch model.     

Evaluation of micro-bubble size and gas hold-up in two-phase gas-liquid columns via scattered light measurements

In this paper, potential use of an elliptically polarized light scattering (EPLS) method to monitor both bubble size and gas hold-up in a bubble-laden medium is explored. It is shown that with the use of the new EPLS system, normalized scattering matrix elements (M_ij's) measured at different side and back-scattering angles can be used to obtain the desired correlations between the bubble sizes and input flow parameters for a gas-liquid (GL) column, including gas flow rate and surfactant concentrations. The bubble size distributions were first evaluated experimentally using a digital image processing system for different gas flows and surfactant concentrations. These images showed that the bubbles were not necessarily spherical. We investigated the possibility of modeling the bubbles as effective spheres. The scattering matrix elements were calculated using the Lorenz-Mie theory and the results were compared against the experimentally determined values. It was observed that the change in the bubble size yields significant changes in M₁₁, M₃₃, M₄₄, and M₃₄ profiles. An optimum single measurement angle of θ=120^° was determined for a gas velocity range of 0.04-0.35 cm/s (). The choice of the optimum angle depends on frit pore size, column diameter, gas pressure, and surfactant concentration. These results suggest that a simplified version of the present EPLS system can effectively be used as a two-phase flow sensor to monitor bubble size and liquid hold-up in industrial systems.     

圆管层流脉冲流动对流换热数值分析

对等热流和等壁温边界条件下圆管内层流脉冲流动对流换热问题进行了数值模拟。在等热流边界条件下的数值计算结果与理论解吻合很好。计算结果表明:在等热流和等壁温边界下脉冲流动可引起速度、温度以及努塞尔数随时间波动,振幅越大,脉冲频率越小,波动越大。但它们的时均值均等于在相同雷诺数下稳态流动的值,脉冲流动不能强化换热。