Excess heat capacities and orientational order in systems containing hexadecane isomers of different molecular structure

Using the Picker flow microcalorimeter, excess heat capacities have been obtained at 25°C throughout the concentration range for 2,2-dimethylbutane,n-hexane, and cyclohexane each mixed with a series of hexadecane isomers of increasing degrees of orientational order, as determined by depolarized Rayleigh scattering. The isomers are 2,2,4,4,6,8,8-heptamethylnonane, 6-, 4-, and 2-methylpentadecane, andn-hexadecane. Thec _p ^E values are negative, increasing rapidly in magnitude with increase of orientational order, and are not predicted by the Prigogine—Flory theory which neglects order. Values ofc _p ^E are obtained at 10, 25, and 55°C for cyclohexane +6-, 4-, and 2-methylpentadecane which with other literature data lead to the temperature dependence of the thermodynamic excess functions for cyclohexane solutions of the five C₁₆ isomers. The excess enthalpy and entropy vary with the C₁₆ isomer and with temperature, but the corresponding variation of the excess free energy is small, indicating a high degree of enthalpy-entropy compensation. This is consistent with a rapid decrease with temperature of orientational order in the C₁₆ isomers.     

Thermodynamic properties of aqueous organic mixtures near the critical demixing: Cases of 2,6-dimethylpyridine and of 2-isobutoxyethanol

Phase diagrams, volumes and heat capacities of aqueous mixtures of 2,6-dimethylpyridine (2,6-L) and 2-isobutoxyethanol (iBE) and activities of 2,6-L in aqueous mixtures were measured in the monophasic region near the lower critical solution temperature (LCST). With 2,6-L some measurement were also made just above the LCST. From the temperature dependence of these data, partial molar relative enthalpies (2,6-L), expansibilities and the temperature derivative of heat capacities were calculated and show that iBE undergoes a microphase transition at low concentration which is not related to the phase separation. On the other hand, the properties of 2,6-L in the water-rich region at temperatures well below the LCST indicates that this solute has only a slight tendency to associate. The heat capacities of 2,6-L show an important increase near the LCST. Such changes are not observed for iBE and other alkoxyethanols and amines since these systems already exist in the form of microphases; the partial molar properties of iBE near the LCST are nearly equal to the molar values of the pure liquid, and the changes in thermodynamic properties corresponding to the macroscopic phase transition, are therefore too small to be measured by the present techniques.     

Ionization of aqueous toluic acids: Conductance and thermodynamics

Conductivities of aqueous solutions ofortho-, meta-, andpara-toluic acids have been measured for the concentration range 0.1–2 millimolar and at 5° intervals from 5 to 100°C. At each temperature pK _a(m) andA ₀ have been calculated using the paired ion model recently described by Fuoss. Thermodynamic parameters have been calculated for the ionization of each acid, and Walden products for the anions. Results are discussed in terms of contributions to acidity by enthalpy and entropy changes as well as by hydration of the various solute species.     

Studies of reaction heats and structure of complexes formed between strong N-bases and phenols

The heats of reactions between various phenols and two strong N-bases of guanidine-like character in acetonitrile, are determined. The values can be used as a measure of self-assembly abilities of the phenol molecules in the interactions with strong N-bases, playing a very important role in biological systems. In the case of TBD complexes with corresponding nitrophenols, the protonated N-base is hydrogen-bonded to the nitro group excluding the self-assembly process of the phenols. In the case of other phenols, the self-assembly abilities are dependent on pK_a values of phenols. With increasing acidity of phenols their ability to form the hydrogen-bonded chains decreases. The maximum of length of the chains is observed for 4-methylphenol, which has a similar pK_a value to that in the tyrosine residue in biological systems.     

Mathematical Modeling of Multicomponent Nonisothermal Adsorption in Sorbent Particles Under Pressure Swing Conditions

A detailed model for nonisothermal sorption of multicomponent mixtures in a single sorbent particle (monodisperse or bidisperse with negligible intracrystalline mass transport limitations) under pressure swing conditions is developed in this study. The dusty-gas model is used to describe the coupling of the molar fluxes, the temperature, the partial pressures and the partial pressure gradients of the components in the pore space of the particle. The variations of the temperature are described by an energy equation in which both convective and conductive modes of heat transport are accounted for. No limitations are imposed on the number of the components in the mixture and on the type of the adsorption isotherm. The model is applied in the investigation of the industrially important air-zeolite 5A system. Two cases with respect to the surrounding gas phase are examined: infinite environment, which is representative for single particle experiments, and finite environment, which is representative for the situation in packed bed adsorbers. It is found that in an infinite environment the external and internal temperature gradients are equally important while in a finite environment the external heat transport limitations are negligible. It is concluded that in modeling the nonisothermal operation of adsorption processes occurring in packed beds it is not necessary to allow for the temperature differences between the gas phase and the surface of the adsorbing particles. Furthermore, if the temperature gradients within the particles can be neglected, only a single temperature equation is needed to describe the energy transport in the bed.     

Thermody namic functions of 1,2-alkanediols in dilute aqueous solutions

The heat capacities of binary aqueous solutions of 1,2-ethanediol, 1,2-propanediol and 1,2-butanediol were measured at temperatures ranging from 283.15 to 338.15 K by differential scanning calorimetry. The partial molar heat capacities at the infinite dilution were then calculated for the respective alkanediols. For 1,2-ethanediol or 1,2-propanediol, the partial molar heat capacities at the infinite dilution of increased with increasing temperature. In contrast, the partial molar heat capacities of 1,2-butanediol at the infinite dilution decreased with increasing temperature. Heat capacity changes by dissolution of the alkanediols were also determined. Heat capacity changes caused by the dissolution of 1,2-ethanediol or 1,2-propanediol were increase with increasing temperature. On the other hand, heat capacity changes caused by the dissolution of 1,2-butanediol are decrease with increasing temperature. Thus our results indicated that the structural changes of water caused by the dissolution of 1,2-butanediol differed from that of the two other alkanediols. This revised version was published online in July 2006 with corrections to the Cover Date.     

Heat capacity of alcohols in aqueous solutions in the temperature range from 5 to 125°C

Using a precise technique of scanning microcalorimetry the heat capacity differences between water and dilute aqueous solutions of ethanol, n-propanol, n-butanol and n-pentanol were measured from 5 to 125°C and the partial molar heat capacities of these substances in water were determined. It was found that the heat capacity increment for alcohol disolved in water is proportional to the number of the-CH ₂ ^– groups and decrease with a temperature increase. The heat capacity increment of hydration of non-polar groups is shown to be positive and large at room temperature and decreases in magnitude as the temperature increases. In contrast, the heat capacity increment of hydration of polar groups is negative at room tempreature and increases as the temperature increases. From the temperature dependence of the heat capacity increment one can assume that the water molecules solvated by the non-polar groups of the alcohols behave in a non-cooperative manner.     

DSC study of cold and heat denaturation processes of β-lactoglobulin A with guanidine hydrochloride

The cold and heat denaturations of bovine P-lactoglobulin A ((β-lg A) has been studied in solutions of guanidine hydrochloride (GuHCI) by differential scanning calorimetry (DSC). The experimental results are presented and discussed. It is shown that the number of protons bound by the monomeric molecules of β-lg A was unchanged before and after its heat denaturation below pH 3, and that the activation energy of the heat denaturation was depressed owing to the presence of GuHCI. In the solutions with 2.50 and 3.06 mol/L of GuHCI, both the cold and heat denaturations of P-lg A were observed. In comparison with the heat denaturation, the activation energy of cold denaturation was far lower and the number of GuHCl molecules bound by the unfolded polypeptide chains after culd denaturation increased a lot. The absolute value of the enthalpy of cold denaturation was larger than that of heat denaturation. It was found by the analysis that the contribution to the total denaturational enthalpy of conformational change itself of the monomeric molecules of β-lg A was the lowest among the globulins, according to the average of the number of heavy atoms. Project supported by the National Natural Science Foundation of China, and by the fund for excellent items under Director of the Institute of Chemistry.     

酞侧基聚芳醚酮的热学性能

酞侧基聚芳醚酮的热学性能谢红卫，李滨耀（中国科学院长春应用化学研究所长春１３００２２）关键词酞侧基聚芳醚酮，ｐｖＴ行为，导热系数，定压比热容酞侧基聚芳醚酮（ＰＥＫ－Ｃ）具有较高的玻璃化转变温度，其流变加工性能和力学性能已被广泛研究［１～３］，被证明是...     

The specific heat of the ferroelectric phase transition in N(CH3)4CdBr3

The specific heat of N(CH₃)₄CdBr₃ from 50 to 300 K has been measured by adiabatic calorimetry, using both static and dynamic methods. The obtained results have permitted a careful study of the ferro-paraelectric phase transition the crystal shows at 160 K. The available spectroscopic data have been used to generate a reliable baseline which accounts for the normal lattice contribution to the specific heat. These results allow for an accurate estimation of the phase transition thermodynamic functions: ΔH=2620 J·mol^?1 and ΔS=18.04 J·(mol°C)^?1. These high values are in agreement with the predictions of the 6 well potential Frenkel model.