The Enhancement of Efficiency of High-order Harmonic in Intense Laser Field Based on Asymptotic Boundary Conditions and Symplectic Algorithm

Asymptotic boundary condition (ABC) of laser-atom interaction presented recently is applied to transform the initial value problem of the time-dependent Schrödinger equation (TDSE) in infinite space into the initial and boundary value problem in the finite space, and then the TDSE is discretized into linear canonical equations by substituting the symmetry difference quotient for the 2-order partial derivative. The canonical equation is solved by symplectic algorithm. The ground state and the equal weight coherent superposition of the ground state and the first excited state have been taken as the initial conditions, respectively, while we calculate the population of bound states, the evolution of average distance and the high-order harmonic generation (HHG). The conversion efficiency of HHG can be enhanced by initial coherent superposition state and moderate laser intensities     

Improvement of the performance of facilitated transport membrane process through nonuniformity

Facilitated transport process has attracted much attention because high selectivity and high permeability may be achieved. However, most research on facilitated transport process is concerned only with uniform membranes. In this paper, a model predicting the gas separation performance of a hollow-fiber module with facilitated transport membrane is developed. The influence of feed rate, operation pressure, and permeant-feed flow pattern on the module performance are analyzed and the effect of the nonuniform distribution of reaction equilibrium constant is examined. The calculated results show that the nonuniform active distribution may cause an improved module performance. Because of the passive transport characteristics of the facilitated transport process, the mass transfer driving force across the membrane has a great influence on the improvement of the module performance through a facilitated transport effect.     

束-气条件下He(23S)与CH3Cl及CH3I的传能研究

在束-气条件下，通过检测产物的化学发光，研究了亚稳电子激发态He（23S）原子与CH3Cl、CH3I传能反应.采用参比反应的方法，测得了由上述反应产生的主要碎片CH（A2△）、CH（B2∑-）、CH（C2∑+）和H*形成速率常数．通过对测得的CH（A2△－X2∏r）和CH（B2∑-－X2∏r）色散谱进行计算机模拟，获得了初生态的CH（A2△，v＝0－2）和CH（B2∑-，v＝0态）的振动-转动布居，实验结果表明，CH（A2△，v＝0）态的转动布居是呈双Boltzman分布的，并且反应的可资用能大部分将转变成产物的平动能．根据实验结果和反应阈能的分析，本文对He（23S）与CH3Cl／CH3I传能反应机理进行了探讨。     

Investigation of the separation of scandium and rare earth elements from red mud by use of reversed-phase HPLC

A chromatographic method has been developed for separation and determination of scandium (Sc) and rare earth elements (REEs) in samples from a red mud (RM)-utilization process. Reversed-phase high-performance liquid chromatography (RP-HPLC) with post-column derivatization using 4-(2-pyridylazo)-resorcinol (PAR) and UV–visible detection at 520 nm was tested using different gradient elution profiles and pH values to optimize separation and recovery, primarily for Sc but also for yttrium and the individual lanthanides, from iron present in the samples. The separation was performed in less than 20 min by use of a mobile phase gradient. The concentration of -hydroxyisobutyric acid (-HIBA), as eluent, was altered from 0.06 to 0.4 mol L^–1 (pH 3.7) and 0.01 mol L^–1 sodium salt n-octane sulfonic acid (OS) was used as modifier. Very low detection limits in the nanogram range and a good resolution for Sc and REEs except for Y/Dy were achieved. Before application of the method to the red mud samples and to the corresponding bauxites, Sc and REEs were leached from red mud with 0.6 mol L^–1 HNO₃ and mostly separated, as a group, from the main elements by ion exchange/selective elution (6 mol L^–1 HNO₃) in accordance with a pilot-plant process developed in this laboratory. After evaporation of the eluent to dryness the extracted elements were re-dissolved in the mobile phase. By use of this chromatographic method Sc, which is the most expensive of the elements investigated and occurs in economically interesting concentrations in red mud, could be separated not only from co-existing Fe but also from Y/Dy, Yb, Er, Ho, Gd, Eu, Sm, Nd, Pr, Ce and La. All the elements investigated were individually recovered. Their recoveries were found to be nearly quantitative.     

A study of the mechanisms involved in the separation of metal ions with a mixed-bed stationary phase

Summary The optimization of chromatographic methods for the determination of metal species require an understanding of the mechanisms involved. In this work, the separation of Cd, Co, Cu, Fe(II/III), Mn, Pb and Zn using a mixed bed column (IonPac CS5A) and a cation-exchange column (IonPac CS2) is studied as a function of mobile phase composition. The type and concentration of complexing agent and of ionic strength modificators were evaluated. The charge of analytes were calculated using the classical ion exchange approach to highlight the effect of eluent composition on retention. The comparative study enabled us to identify an optimal eluent composition for the separation of the nine metal species.     

Synthesis of N,N′-dimethyl-N,N′-dibutyl malonamide functionalized polymer and its sorption affinities towards U(VI) and Th(IV) ions

A novel chelating polymeric material was synthesized by chemical anchoring of N,N′-dimethyl-N,N′-dibutyl malonamide (DMDBMA) with chloromethylated polystyrene-divinyl benzene polymer. The polymeric material thus prepared was characterized by ¹³C NMR, FT-IR spectroscopy and CHN elemental analysis. The fabricated polymeric material exhibited superior binding for hexa-valent and tetra-valent metal ions such as U(VI) and Th(IV). Various physico-chemical properties of the functionalized polymer like phase adsorption kinetics, metal sorption mechanism and metal sorption capacity was studied in the static method. Adsorption kinetics studies show that <20 min was sufficient for >99.99% adsorption of Th(IV) and U(VI). The kinetics for adsorption of U(VI) and Th(IV) was found to follow the first order Lagergren rate kinetics. Adsorption of U(VI) on the malonamide functionalized polymer followed the Langmuir adsorption isotherm. The Langmuir monolayer adsorption phenomenon was also confirmed by the theoretical approach calculated based on the adsorption kinetics. The metal sorption capacities for uranium and thorium were found to be 18.78 ± 1.53 mg and 15.74 ± 1.59 mg/g of the chelating polymer at 3 M HNO₃, respectively.     

发酵液中谷氨酰胺提取新工艺

本文根据谷氨酸和谷氨酰胺的电离常数的差异，采用一种新型的离子交换工艺，通过单根阴离子交换柱，从谷氨酰胺发酵液中提取谷氨酰胺。粗晶溶解液通过阴离子交换柱后，谷氨酰胺最高收率达到83％，谷氨酸去除率90％。该法在显著提高产品收率的同时，还大大减少了酸碱用量。     

基于5-芳基乙内酰脲类化合物的CoMFA和HQSAR研究

用CoMFA和HQSAR两种QSAR方法研究了50个乙内酰脲类分子的定量构效关系.本研究从构象搜索所得的低能结构出发构建化合物分子的构象, 建立CoMFA模型,并进行了全空间搜索. HQSAR本质上是一种二维的QSAR方法,与CoMFA方法相比,该方法在数据处理方面,比CoMFA方法快捷,并且可重复性好.两种方法均得到了较好分析结果, CoMFA的交叉验证相关系数q2 值为0.815, HQSAR的q2值为0.893.这些方程有力地说明了该类分子在(R,R)-N-3,5-dinitrobenzoyl-1,2-diamine型手性固定相上拆分过程中的影响因素,对今后类似拆分的实验研究提供了理论支持.     

可调移动重叠分离图法用于高效液相色谱多台阶梯度分离条件优化的研究

计算机辅助高效液相色谱（HPLC）分离条件优化可以低成本、快速地得到优化的分离条,因而已较为广泛地用于复杂样品的分离分析。基于移动重叠分离图方法,又发展了一种新型的多台阶梯度分离条件的优化方法可调移动重叠分离图法。该方法通过预测不同流动相条件下各组分的保留时间、峰宽和分离度,绘制出对于样品中各组分的重叠分离区域图。在对当前台阶流动相组成进行优化的同时,考虑其对后面一到两个台阶上流出组分保留的影响,实时地重新绘制对于后面台阶上流出组分的重叠分离区域图。通过观察当前台阶流动相条件对当前台阶和后面台阶上流出组分分离的影响,综合考虑样品中所有组分的分离情况,找到更接近全局最优的分离条件。通过扫描的方法对优化得到的分离条件进行微调,能够进一步提高分离效果。采用文献数据对可调移动重叠分离图法的应用加以说明,在二元流动相体系下,证明了该方法在HPLC方法建立方面的优越性。     

Uniform hierarchical silica film with perpendicular macroporous channels and accessible ordered mesopores for biomolecule separation

Herein, we demonstrate that silica films with perpendicular macroporous channels and accessible ordered mesopores can be conveniently prepared. The hierarchical macroporous–mesoporous silica films are synthesized by using zinc oxide nanorod array as macroporous template and CTAB surfactant as mesoporous template. In basic surfactant-containing solution, ordered mesoporous silica shells homogeneously grow on the zinc oxide nanorod array. The growth of the mesostructures do not require any chemical modification for the zinc oxide nanorod, which opens a new way for preparing hierarchical silica films with perpendicular mesochannels. The prepared hierarchical macroporous–mesoporous silica films possess a uniform thickness of 2 mm, large perpendicular macropores with a length of 1.8 mm and a width of 80 nm, and accessible ordered mesopores. Separation experiment demonstrates that this macroporous–mesoporous film can effectively separate biomolecules with different sizes.