Structural Changes of Cellulose Crystallites Induced by Mercerisation in Different Solvent Systems; Determined by Powder X-ray Diffraction Method

The completeness of mercerisation can be evaluated by investigating the changes in the crystalline regions of cellulose from cellulose I (C-I) to cellulose II (C-II) by the X-ray powder diffraction method. Mercerisation experiments in four different solution systems: ethanol/water, acetone, DMSO and xylene, are reported. Also the effect of some additives, external pressure, treatment time and alkalisation temperature were studied. In two-phase solvent systems, structural changes of cellulose crystallites depended primarily on the distribution and solubility of sodium hydroxide in the solvent phases. The sodium hydroxide concentration in the hydrophilic phase must exceed 7–8 w/w-% before complete crystal change from C-I to C-II can occur. The precipitation of sodium hydroxide due to high concentration prevents the successful use of one-phase ethanol/water system in slurry process. On the contrary, the 2-propanol/water/sodium hydroxide system separates into two layers; to the water-rich lower layer and the 2-propanol-rich upper layer, where the sodium hydroxide remains mainly in the water-rich lower layer. This prevents the precipitation of sodium hydroxide and promotes the alkalisation of cellulose. Ammonium chloride and ammonium hydroxide clearly had a positive effect by promoting the crystal changes, however, the urea concentration used in this study was obviously too small. In the advantageous two-phase 2-propanol/water systems, the alkalisation time was only 15 min when the treatment temperature was kept between 0 and 10 °C. Reduced external pressure was found to have a small but still detectable positive effect on cellulose alkalisation while over-pressure prevented crystal changes.     

Solid-phase synthesis of amidines by the reduction of amidoximes

Amidines can be prepared on a solid support by reducing polymer-bound amidoximes with SnCl₂·2H₂O. The method has proved to be straightforward and highly efficient. Amidoximes attached to the solid support are readily available by treating resin-bound nitriles with hydroxylamine.     

On the pressure-induced phase transformation in the structure II clathrate hydrate of tetrahydrofuran

A high-pressure phase of the clathrate hydrate of tetrahydrofuran was prepared by freezing a liquid phase of overall composition THF · 7 H₂O under a pressure of 3.0 kbar, or by pressurizing the solid structure II THF hydrate of 255K to 3.4 kbar. Unfortunately, the products recovered at 77K were always mixed phase materials as shown by X-ray powder diffraction. A number of diffraction lines could be indexed in terms of the cubic structure I hydrate with a slightly expanded lattice parameter, 12.08 Å, giving some support to Dyadin's idea that the high pressure phase transition involves a conversion of Structure II to Structure I. Other phases observed in the recovered product include Ice IX and amorphous materials. The reversion of the high pressure sample to the structure II hydrate was followed by differential scanning calorimetry. At ambient pressure, the high pressure sample converts slowly back to Structure II hydrate event at 77K.NRCC No. 35786.     

Zinc(II) (o-hydroxybenzaldoximates) Complexes with Mono- and Bidentate Ligands

New complexes:Zn(Hsalox)(ox), Zn(Hsalox)(NHPh), Zn(Hsalox)(Hsal) and Zn(Hsalox)₂(1,2-diMeim) have been synthesised as a result of a reaction of Zn(salox) and Zn(Hsalox)₂ (where: salox ^2–=OC₆H₄CHNO^2–, Hsalox ^–=OC₆H₄CHNOH^–) with 8-hydroxyquinoline (Hox), o-aminophenol (NH₂Ph), o-hydroxybenzoic acid (H₂Sal) and 1,2-dimethylimidazole (1,2-diMeim). Chemical, X-ray and thermal analyses of the complexes and their sinters have been carried out. Thermal decomposition pathways have been postulated for the complexes. The mixtures about not definite composition have been obtained as a result of a reaction of zinc(o-hydroxybenzaldoximates) with imidazole(Him) and 4-methylimidazole (4-MeHim). This revised version was published online in August 2006 with corrections to the Cover Date.     

Syntheses, crystal structures and magnetic properties of a new nitronyl nitroxide NIT2-bithph and its manganese(II) compound [Mn(hfac)2(IMHBithph)]2·(NIT2-bithph)(C6H14)

A new nitronyl nitroxide NIT2-bithph (1) and its manganese(II) compound [Mn(hfac)₂(IMHBithph)]₂·(NIT2-bithph)(C₆H₁₄) (2) (hfac = hexafluoroacetylacetonate; NIT2-bithph = 4,4,5,5-tetramethyl-2-(bithiophenal-2-yl)imidazoline-1-oxyl-3-oxide; IMHBithph = 1-hydroxy-2-bithiophenal-4,4,5,5-tetramethyl-4,5-dihydro- 1H-imidazole) have been synthesized and structurally characterized by X-ray diffraction methods. The units of compound 1 were connected as one-dimensional chain by the intermolecular hydrogen bonds which afford an intermolecular antiferromagnetic interaction between nitronyl nitroxide radicals within the chain (J = −1.89 cm⁻¹). Compound 2 resulting from the reaction of Mn(hfac)₂·2H₂O and NIT2-bithph is dinuclear and includes the reduced amidino-oxide form of NIT2-bithph, it is made up of three parts: a [Mn(hfac)₂(IMHBithph)]₂ dimer unit, an uncoordinated NIT2-bithph radical and a noncoordinated solvent molecule of hexane, the molecule of radical is hydrogen bonded to its reduced form. Two reduced IMHBithph ligands bridge the two manganese(II) ions through their amidino-oxide oxygen atoms resulting in a small intramolecular antiferromagnetic interaction between the manganese ions (J = −1.55 cm⁻¹).     

Cobalt(II) and nickel(II) complexes of a cyclam derivative as carriers in iodide-selective electrodes

The ligand 1,4,8-tri(n-octyl)-1,4,8,11-tetraazacyclotetradecane (L¹) containing pendant octyl groups has been synthesised. L¹ is a tetraazamacrocycle derived from the well-known cyclam unit, and the Ni²⁺ and Co²⁺ complexes, [Ni(L¹)]²⁺ and [Co(L¹)]²⁺, have been isolated and characterised. The ability of the nickel(II) and cobalt(II) complexes to act as anion receptors has been studied by using them as ionophores in membrane-based ion-selective electrodes (ISEs). The PVC membrane containing the complex [Ni(L¹)]²⁺ and 2-nitrophenyloctylether as plasticizer shows a Nernstian response against iodide in a concentration range from 1×10⁻¹ to 4×10⁻⁵ M I⁻ with a detection limit of 1.6×10⁻⁵ M I⁻ and a slope of 58.6 mV/pI⁻ at pH 7 (25 °C). In comparison, the electrode containing [Co(L¹)]²⁺ as ionophore gave a sub-Nernstian slope and a low lifetime. A comparison between the iodide-selective electrode containing [Ni(L¹)]²⁺ and other reported iodide-selective electrodes is also reported.     

Simultaneous determination of mercury and arsenic by anodic stripping voltammetry

An electrochemical method for the simultaneous determinations of Hg^II concentration and total As^III and As^V concentration has been developed. The method does not require the additional preliminary step of the chemical reduction of As^V to As^III, or oxidation of As^III to As^V before stripping analysis takes place. Also, the method for the simultaneous determination of Hg^II concentration and As^III concentration is described. Measurements were performed in 0.1 M HCl using a gold-plated graphite electrode as sensor. Detection limits for both methods are below 0.4 ppb. Relative standard deviation did not exceed 15%. The possible interference by other trace metals was investigated. Analyses of natural water and industrial solutions were made using proposed methods and AAS. The t-test demonstrates that there was no significant difference between the results obtained with these methods. Proposed methods decrease the time of analysis because concentrations of the Hg^II and arsenic ions were measured simultaneously. Also, the removal of the additional step of chemical reduction of As^V to As^III or oxidation of As^III to As^V decreases analysis time, and also reduces the chance of contamination due to the use of additional reagents.     

Benchmarking of ruthenium initiators for the ROMP of a norbornenedicarboxylic acid ester

The kinetic study of ring-opening metathesis polymerization (ROMP) of a diester functionalised norbornene derivative, (±)-exo,endo-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid diethyl ester, with a series of ruthenium benzylidene complexes revealed the applicability of these initiators for well defined polymerization reactions. Values for the rate of initiation as well as the rate of propagation of the initiators were determined and correlated to the molecular weight and polydispersity of the isolated polymers. As the only initiator providing an entry to virtually monodisperse polymers the classical “first generation Grubbs-catalyst” was identified, while N-heterocyclic carbene based initiators polymerized with a rate of propagation much higher than the rate of initiation yielding polymers with a broader molecular weight distribution.     

Samarium diiodide promoted formation of 1,2-diketones and 1-acylamido-2-substituted benzimidazoles from N-acylbenzotriazoles

N-Acylbenzotriazoles, when treated with samarium diiodide in THF, undergo self-coupling reaction to afford 1,2-diketones in good to excellent yields; while when treated with samarium diiodide in CH₃CN, they undergo ring-opening reaction to afford 1-acylamido-2-alkyl (or aryl) benzimidazoles in reasonable to good yields. A plausible mechanism was suggested.     

Co(II) Schiff碱载氧载氮性能研究

运用INDO－UHF计算方法研究了CO(Ⅱ) Schiff碱的载氧特性，结果表明，Co(Ⅱ)与O_2的作用是通过σ键组合，并具有较明显的反铁磁性耦合作用, 论证了作为第五轴向配体在可逆载氧过程中的必要性，对比研究了Co－N_2的相互作用. 计算表明，CO(Ⅱ)的Schiff碱络合物可能作为氧氮分离的活性物质，从而具有一定的、潜在的工业应用价值.