中性溶质在电色谱进样过程中的自富集作用

从理论上探讨了溶质在柱头产生的自富集作用过程,说明了进样时间及流动相组成对富集效果的影响规律,并以安息香和美芬妥因两种药物为例对理论加以验证.结果表明,较好地控制实验条件,在基本不影响柱效的情况下,可以达到十余倍的自富集效果.     

C-Fe chains due to segregated carbon impurities on Fe(1 0 0)

Bulk carbon impurities segregate at the Fe(1 0 0) surface and, upon thermal annealing, can form metastable surface phases with local and long range order and peculiar electronic properties. We present a surface science study of C-segregated Fe(1 0 0) with scanning tunneling microscopy, angle resolved photoemission, and ab initio calculations of the surface structure and electron states. In particular the c(3√2 × √2) structure, observed for 0.67 atomic layers of C segregated at the iron surface, is found to be due to self-organized carbon stripes made of zig-zag chains. The strong hybridization between C and Fe was observed in ARPES spectra.     

克尔介质中超连续谱的产生与自聚焦的抑制

 从（3+1）维非线性薛定谔方程出发,理论上分析了超短脉冲频谱展宽与自聚焦的影响因素。分析得出：通过改变泵浦光的功率和光束口径,可以实现光谱的极大展宽并避免自聚焦成丝。数值模拟了小口径强泵浦光束在BK7玻璃中的传输过程并进行了实验验证。模拟结果显示在超连续谱产生的同时小尺度调制被完全抑制。实验结果表明：降低泵浦光功率,使光束不会因为全光束自聚焦而发生塌陷,同时还能控制除自聚焦外的其它非线性效应,进而改善近场光束质量。由于自相位调制是超短超强脉冲产生超连续谱的重要机制之一,需要维持传输过程中的泵浦光功率,由此最佳的入射光功率应选在全光束自聚焦功率阈值附近。     

Removal of graffiti from the mortar by using Q-switched Nd:YAG laser

This paper presents part of the larger study on microstructural features of mortars and it's effects on laser cleaning process. It focuses on the influence of surface roughness, porosity and moisture content of mortars on the removal of graffiti by Nd:YAG laser. The properties of this laser are as follows: wavelength (λ) 1.06 μm, energy: 500 mJ per pulse, pulse duration: 10 ns. The investigation shows that the variation of laser fluence with the number of pulses required for the laser cleaning can be divided into two zones, namely effective zone and ineffective zone. There is a linear relationship observed between number of pulses required for laser cleaning and the laser fluence in the effective zone, while the number of pulses required for the laser cleaning is almost constant even though the laser fluence increases in the ineffective zone. Moreover, surface roughness, porosity and moisture content of mortar samples have influence on the laser cleaning process. The effect of these parameters become however negligible at the high level of laser fluence. The number of pulses required for the laser cleaning is low for smooth surface or less porous mortar. Furthermore, the wetness of the samples facilitates the cleaning process.     

负压区的存在对刚性陶瓷过滤器脉冲反吹性能的影响

利用压电式压力传感器测定了陶瓷过滤器在脉冲反吹过程中滤管内动态压力的变化规律,表明在脉冲反吹快要结束和正常过滤尚未开始的过渡过程中,滤管内存在严重的负压区。利用单个颗粒轨道模型分析了部分已被吹离滤管表面的小颗粒在负压区的作用下会重新返回到滤管壁,从而证实了负压区是影响刚性陶瓷过滤器稳定运行的重要原因。     

银纳米粒子阵列的自组装及其表面增强拉曼光谱应用

在以聚赖氨酸为表面耦联层分子的玻片基底制备了银纳米粒子阵列。ＳＥＭ表征结果表明,银粒子以亚单层的形式排列在基底表面。比较银溶胶和纳米粒子阵列的紫外可见光谱可见聚赖氨酸耦联层对银纳米粒子的粒径具有一定的选择性,甲基紫精在银纳米粒子阵列上的表面增强ＦＴ拉曼光谱表明在近红外区拉曼散射的表面增强主要来自于化学增强效应。     

Reactive ion etching of FePt using inductively coupled plasma

We propose a reactive ion etching (RIE) process of an L1₀-FePt film which is expected as one of the promising materials for the perpendicular magnetic recording media. The etching was carried out using an inductively coupled plasma (ICP) RIE system and an etching gas combination of CH₄/O₂/NH₃ was employed. The L1₀-FePt films were deposited on (1 0 0)-oriented MgO substrates using a magnetron sputtering system. The etching masks of Ti were patterned on the FePt films lithographically. The etch rates of ∼16 and ∼0 nm/min were obtained for the FePt film and the Ti mask, respectively. The atomic force microscopy (AFM) analyses provided the average roughness (R_a) value of 0.95 nm for the etched FePt surface, that is, a very flat etched surface was obtained. Those results show that the highly selective RIE process of L1₀-FePt was successfully realized in the present study.     

Fabrication of robust superhydrophobic coatings using PTFE‐MWCNT nanocomposite: Supercritical fluid processing

Fabrication of polymer‐carbon composite nanostructure with good dispersion of each other is critical for the desired application due to the nanostructure flaws, agglomeration, and poor absorption between the 2 materials. Fabrication of superhydrophobic surface coating composites of polytetrafluoroethylene (PTFE) with multiwalled carbon nanotubes (MWCNTs) through supercritical fluid processing was explored in this study. Homogeneity of the composite was characterized by X‐ray diffraction and Raman spectroscopy studies, which reveal that the PTFE and MWCNT are uniform in the composite. Microstructural surface evaluation of field‐emission scanning electron microscope and high‐resolution transmission electron microscope studies display that the coating composite possesses roughness structures and fibrillation of the superhydrophobic surface coating. Superhydrophobic character was evaluated on fiber‐reinforced plastic (FRP) sheets, which showed that the prepared coating composite surface showed self‐cleaning properties with a high water contact angle of 162.7°. The surface wettability was studied by increasing different temperatures (30°C to 300°C) in PTFE‐MWCNT composite, which reveals that the FRP sheets were thermally stable up to 200°C and afterward; they transformed from superhydrophobic to hydrophilic state at 250°C. The superhydrophobic surfaces are thermally stable in extreme environmental conditions, and this technique may be used and extendable for large‐scale applications.     

Evaluation of Polyphenols in Wine by Voltammetric Techniques with Screen Printed Carbon Electrodes

The electrochemical oxidation processes that occur during a voltammetric assay in wine samples lead to the formation of species that obstructs the surface and reduce their active area. This effect is critical for screen printed carbon electrodes (SPCE) and leads to abnormal low values of the total polyphenols content of wines, ca. 72 % lower than those obtained with glassy carbon electrodes. This effect was examined using 10 red and Port wine samples. Mechanical polishing and electrochemical‐based treatments for the removal of this fouling layer were tested. The best results were obtained by electrochemical activation in at a constant potential of 1.2 V during 100 s Na₂CO₃ saturated solution, and by polishing. The success of some of these treatments brings an added value to SPCE, as it opens the possibility of their reuse in the wine analysis. This outcome is particularly relevant for quality control where a huge number of analysis is performed and the reduction of cost may dictates the choice of the analytical method.     

激光除锈过程的实时监测技术研究

对激光除锈过程中的实时监测技术进行了实验研究,结果表明:除锈过程中产生的声波强度会随着表面清洁度的变化而发生明显的变化,声波信号包含了除锈过程中的大量信息,可作为激光除锈实时监测的基本信号.