The effect of short glass fibers on the process behavior of polyamide 12 during selective laser beam melting

In additive manufacturing, polymer composites are used for setting tailored properties. Short glass fibers can be used as fillers for polyamide 12 for enhancing stiffness or tensile strength as well as for reducing shrinkage. In this paper, the effects of short glass fibers on polyamide 12 concerning powder properties, process behavior and part properties in laser beam melting of polymers (SLS) are investigated. It could be shown that by increasing the short glass fiber content powder properties as well as part properties are immensely affected. By adding glass fibers, powder properties, like flowability and diffuse reflection decrease. The isothermal crystallization changes resulting in a narrower processing window. Concerning mechanical properties, short glass fibers allow for a higher stiffness until a critical limit of filler concentration within this study is reached, after which the tensile strength decreases. The elongation of break decreases by rising the filler content.     

一个各向异性磁稀释杂化钙钛矿系列[CH3NH3][CoxZn1-x(HCOO)3]

Inorganic-organic or hybrid perovskite materials, which are the complementary counterparts of pure inorganic perovskites, can provide many new opportunities in the researches of phase transitions, critical phenomena, and relevant properties, as they combine the characteristics of inorganic and organic components. Therefore, the hybrid perovskites of ammonium metal formate framework are very promising, and their properties have been found to be strongly dependent on the characteristics of the constituent metal ions and/or ammonium ions. Herein, we used solid solution strategies, borrowed from solid state chemistry, to investigate the anisotropic diluted magnetic hybrid perovskite system of [CH₃NH₃][Co_xZn_1-x(HCOO)₃], wherein the B-sites are occupied by the mixed metal ions of Co²⁺ and Zn²⁺. The solid solution compounds of this series in the range x = 0–1 (or the molar percent Co% = 0–100%) were successfully prepared using conventional solution chemistry methods. The resulting compounds were demonstrated to be iso-structural by using both single-crystal and powder X-ray diffraction analyses. The solid solution crystals belong to the orthorhombic space group Pnma, with the cell parameters being a = 8.3015(2)–8.3207(3) Å, b = 11.6574(4)–11.6811(5) Å, c = 8.1315(3)–8.1427(4) Å, and V = 787.89(5)–790.98(7) ų. The perovskite structure consists of a simple cubic anionic metal-formate framework and CH₃NH₃⁺ cations which are located in the framework cavities, with N―H···O hydrogen bonds formed between the framework and the cation. The members of this series showed negligible changes (< 0.4%) in their respective lattice and structural parameters. Thus, the prepared solid solution compounds constitute good molecule-based examples for the study of magnetic dilution under almost the same structural parameters and molecular geometries. Upon dilution, the magnetization per mole of Co at low temperatures and low fields was suppressed by the magnetic anisotropy of Co²⁺ and gradual destruction of the large spin canting between coupled Co²⁺ ions, in contrast to the magnetization enhancement observed in the isotropic diluted system of [CH₃NH₃][Mn_xZn_1-x(HCOO)₃] with the same perovskite structure. The percolation limit was estimated as (Co%)_P = 27(1)% (or x_P = 0.27(1)) from the magnetic data, which was slightly lower than that predicted by the percolation theory for a simple cubic lattice (31%); this trend was due to the strong magnetic anisotropy of the present system. In addition, rare incommensurate phase transitions were primarily detected below ~120 K for the pure Co and Zn members, which may also affect the magnetic properties of the materials.     

Conjugated polymer nanoparticles as fluorescence switch for selective cell imaging

Fluorescence switch plays a vital role in bioelectronics and bioimaging.Herein,we presented a new kind of facile electrostatic complex nanoparticles(ECNs)for fluorescence switching in cells and marking of individual cell.The ECNs were prepared by mixing positively charged poly(6-(2-(thiophen-3-yl)ethoxy)hexyl trimethylammonium bromide)(PT)and negatively charged diarylethene sodium salt(DAECOONa).DAE-COONa is a photoswitchable molecule which can be transformed between the ring-closed fo rm and ring-open form under the irradiation of UV or visible light.The closed-form of DAE-COONa can efficie ntly quench the fluorescence of PT through intermolecular energy transfer,while the open form of DAE-COONa does not influence the emission of PT.Thus,the fluorescence of ECNs can be modulated by light irradiation,and the ECNs with good fluorescence switching performance have been employed for fluorescence imaging and individual cell lighting up process successfully.We demonstrate that the electrostatic complex strategy provides a facile method to construct fluorescence switch fo r selective cell marking and imaging applications.     

同位素稀释高效液相色谱-串联质谱法测定水体、底泥、鱼及虾中氯硝柳胺残留量

建立了水体、底泥、鱼体自然比例带皮肌肉和虾肌肉中氯硝柳胺(NIC)残留量测定的同位素稀释高效液相色谱-串联质谱(HPLC-MS/MS)法。水样经碱化后以乙酸乙酯提取,其他样品采用0.1%氨水乙腈提取,C_(18)粉进行样品净化。以乙腈-水为流动相,流速为0.3 mL/min,采用Thermo Hypersil Gold C_(18)(150 mm×2.1 mm,5μm)色谱柱进行分离,氯硝柳胺稳定同位素标记物(氯硝柳胺-~(13)C_6)为内标,选择反应监测(SRM)模式扫描,内标法定量。结果表明氯硝柳胺在0.2～200μg/L范围内呈良好线性关系,相关系数(r~2)不小于0.999 5。空白水样在2.5、25、250 ng/L加标水平下的平均回收率为90.5%～109%,相对标准偏差(RSD)为3.2%～11%,检出限(LOD)为1.0 ng/L,定量下限(LOQ)为2.5 ng/L;空白底泥、黄颡鱼自然比例带皮肌肉和克氏原螯虾肌肉在0.5、5.0、50μg/kg加标水平下的平均回收率分别为89.4%～113%、92.8%～110%和94.1%～107%,RSD分别为4.6%～12%、2.8%～11%和3.2%～9.3%,LOD均为0.2μg/kg,LOQ均为0.5μg/kg。该方法的灵敏度、准确度和选择性高,适用于实际水产养殖环境水体、底泥、鱼和虾中氯硝柳胺的残留分析。     

Recent strategy(ies) for the electrocatalytic reduction of CO2: Ni single-atom catalysts for the selective electrochemical formation of CO in aqueous electrolytes

To decrease the global carbon footprint concerns and to diminish the energy crisis, electrocatalytic reduction of CO₂ which results in the formulation of value-added chemicals is a potential solution. In this review, single-atom catalysts (SACs) which are rapidly growing and being developed as the stimulating catalytic materials for electrocatalytic reduction of CO₂ with improved selectivity, efficiency, and stability are considered. Various factors which are responsible for the efficient CO₂ reduction are discussed. The pyrolytic approach for the preparation of Ni-based SACs and the maximum atom utilization efficiency for the desirable production of CO from CO₂ are highlighted.     

Preparation of N-acetyl-para-aminophenol via a flow route of a clean amination and acylation of p-nitrophenol catalyzing by core-shell Cu2O@CeO2

The selectivity and reactivity to converse series nitroaromatic into aminobenzenes are especially significant, which play a vital role in synthesizing required drugs or other fine chemicals. Herein, p-nitrophenol (p-NP) has been completely conversed into p-anomiphenol (p-AP) with a high activity factor k (0.033 s⁻¹·mg⁻¹) and reusability by core-shell Cu₂O@CeO₂ catalyst. N-acetyl-para-aminophenol (paracetamal, APAP) as a model drug was further synthesized via a flow route proceeded in two steps including p-NP reduction and subsequently p-AP acylation with self-constructing device. The yield of the paracetamal is up to 85% with a highly purity. The mechanism investigation justifies the rich-electron centers and cation defects generated from the redox coupled Cu⁺→Cu⁰ with Ce³⁺→Ce⁴⁺ will steer selective conversion of p-NP to p-AP, a rate-determining step in the production of APAP. The present results could visualize a highly selective catalyst and a new synthesis route for pharmaceuticals such as paracetamal by using nitroaromatic compounds as the raw materials with environment-friendly, low-cost, easy-manipulation, high-efficiency and high purity.     

血清中葡萄糖含量CCQM-K11.1国际比对

研究利用同位素稀释质谱法测定血清中的葡萄糖含量,并利用该方法参加国际物质量咨询委员会（CCQM）2005年组织的关键比对CCQM—K11．1,我国国家标准物质研究中心（NRCCRM）的测定结果与韩国（KRISS）和墨西哥（CENAM）的测定结果非常接近,日本（NMIJ）的测定结果离群偏高。     

同位素稀释热电离质谱法测定人血清中痕量铜和锌

采用热电离同位素稀释质谱法(ID-TIMS)准确测定了欧盟标准物质与测量研究院(EC-JRC-IRMM)组织的国际测量评估计划IMEP-17人血清样品中的痕量铜和锌。由于锌和铜都是易受污染的元素,本工作建立了仅用少量硝酸消解的低流程本底和适于热电离质谱测量的生物基体血清中痕量铜和锌的样品前处理方法;采用适当比例的硅胶和磷酸作为电离增强剂,在热电离质谱(TIMS)测量时获得了较高强度且稳定的铜和锌离子束;血清中痕量铜和锌的测量结果可直接溯源到国际单位mole。2种人血清样品中铜和锌测量结果的不确定度(k=2)分别为0.94%、0.83%和0.49%,测量值被EC-JRC-IRMM采用作为该样品的标准值。     

非还原脲变性蛋白溶菌酶稀释复性过程中集聚现象的研究

用十二烷基硫酸钠-聚丙烯酰胺凝胶电泳、阴极聚丙烯酰胺凝胶电泳和高效凝胶排阻色谱法, 研究了非还原脲变性蛋白溶菌酶在稀释复性过程中的集聚现象. 实验发现, 在整个稀释复性过程中, 没有蛋白溶菌酶集聚体沉淀产生. 当最终复性液中蛋白溶菌酶浓度小于4.0 mg/mL时, 复性过程中不会形成蛋白溶菌酶分子集聚体; 当最终复性液中蛋白溶菌酶浓度介于4.0～8.0 mg/mL时, 复性过程中会形成由非共价相互作用所引起的蛋白溶菌酶二分子和三分子集聚体; 而当最终复性液中蛋白溶菌酶浓度大于8.0 mg/mL时, 复性过程中除了会形成二分子和三分子蛋白溶菌酶集聚体外, 还会形成四分子蛋白溶菌酶集聚体. 在此基础上, 结合文献, 对非还原脲变性蛋白溶菌酶的稀释复性过程进行了描述.     

1,3-丁二烯选择性加氢催化剂的设计策略以及构效关系

催化裂化是石油化工的核心单元之一.从催化裂化尾气中分离出来的碳四馏分富含许多的不饱和烯烃,如1-丁烯、顺、反式-2-丁烯以及少量的1,3-丁二烯,这些不饱和烯烃可以通过后续聚合反应,生成合成橡胶和工程塑料的重要原料,具有重要的应用价值.上述工艺过程对原料中1,3-丁二烯的含量(<100~200 ppm)有严苛的要求.采用选择性加氢技术对碳四馏分中的1,3-丁二烯进行选择性加氢,将其转化为更高附加值的单烯烃是一个理想的解决方案.然而,1,3-丁二烯加氢反应得到的单烯烃可能发生深度加氢得到副产物丁烷.因此,开发高效选择性加氢催化剂对碳四资源的利用具有重要的现实意义.另一方面,1,3-丁二烯加氢反应可以作为模型反应,用来考察选择性加氢催化剂的性能.基于此,该反应无论在工业界还是学术界均受到广泛关注.尽管如此,有关1,3-丁二烯加氢催化剂研究进展方面的综述极少.仅有关于1,3-丁二烯加氢作为模型反应的综述报道.本文对过去半个世纪以来1,3-丁二烯加氢反应中不同催化剂的发展历程进行系统综述,特别是包括Pd,Pt和Au等的单一贵金属催化剂.重点介绍以下内容:(1)固体催化剂构效关系,包括活性金属尺寸效应、晶面和形貌效应以及载体效应(晶相、孔道和酸碱性);(2)高性能催化剂的设计新策略,如单原子催化剂、核壳结构催化剂、金属-离子液复合催化体系以及载体的形貌调控;(3)催化剂的反应机理和失活机理.提出了1,3-丁二烯选择性加氢高性能催化剂开发面临的挑战,并对潜在的发展方向进行了展望.本文认为随着纳米技术和金属纳米材料合成方法的快速发展,对贵金属活性组分进行原子层面上的调控(包括形貌、尺寸以及单原子配位环境等)已成为可能.这将有助于研制出一类新型高性能选择性加氢催化材料,从而实现高转化率条件下高附加值单烯烃的定向转化.此外,载体的酸碱性和孔道结构的调控有助于进一步调节催化剂的抗积炭性能,也是未来发展的一个重要方向.