Optimization model of recrystallization hot rolling of titanium-vanadium steels

An optimization model was built based on the data of a pilot-scale (4.5 MN load, 225 KW power capacity) rolling mill to minimize the austenite grain sizes of Ti–V steels, which prevail at the instant of completion of the static recrystallization during hot rolling. A computer program developed for this optimization model was run for the rolling schedule, which is designed according to the complete recrystallization case. An energy optimization model developed previously was applied to different rolling schedules. The grain size optimization results demonstrate the effectiveness of these modelling approaches in terms of final grain size, final plate thickness, measured and computed roll force and torque values for both the design of the thermomechanical schedules which produce plate with fine-grained microstructures, high strength, and notch toughness and the temperature-reduction schedules of conventional controlled rolling.     

样品-窗口界面运动速度的VISAR测试技术

 介绍了与VISAR配合的加窗干涉仪测试技术。实验中分别采用样品表面和窗体表面作为信号光反射面，并用透明粘接剂粘接窗口和样品，得到厚度约为6 μm、对532 nm激光透过率不小于85%的粘接层。对窗体本身提出采用楔形的技术，有助于消除表面反射光和窗体寄生干涉对VISAR信号的干扰，从而提高信号的信噪比和测试可靠度。利用这一技术分别得到了6.5 GPa和3.61 GPa冲击压力下铜-LiF晶体窗口、LiF-LiF晶体窗口之间的界面速度变化过程。     

一种非对称大型有限元方程组的有效分块波前解法

提出分块波前法求解非对称大型有限元方程组，该方法综合分块解法和波前法的优点，根据计算机容量和方程的阶数优化计算过程，以在经济效率和存储效率之间达到平衡。本文利用该方法求解了轮胎稳态滚动有限元方程组，表明该方法是有效、可靠的。     

Dynamics of Slider-Crank Mechanisms with Flexible Supports and Non-Ideal Forcing

Transient and steady state dynamic response of a class of slider-crank mechanisms is investigated. Specifically, the class of mechanisms examined involves rigid members but compliant supporting bearings. Moreover, the mechanisms are subjected to non-ideal forcing. Namely, both the driving and the resisting loads are expressed as a function of the angular coordinate describing the crank rotation. First, an appropriate set of equations of motion is derived by applying Lagrange's equations. These equations are strongly nonlinear due to the large rigid body rotation of the crank and the connecting rod, as well as due to the nonlinearities associated with the bearing action and the form of the driving and the resisting loads. Consequently, the dynamics of the resulting dynamical system is examined by solving the equations of motion numerically. More specifically, transient response is captured by direct integration, while determination of complete branches of steady state response is achieved by applying appropriate numerical methodologies. Initially, mechanisms whose crankshaft is supported by bearings with rolling elements and linear stiffness characteristics are examined. Then, numerical results are presented for rolling element bearings with nonlinear stiffness characteristics. Finally, the study is focused on mechanisms supported by hydrodynamic bearings. In all cases, the attention is focused on investigating the influence of the system parameters on its dynamics. Moreover, models with constant crank angular velocity are first analysed, since they provide valuable insight into some aspects of the system dynamics. Eventually, the emphasis is shifted to the general case of non-ideal forcing, originating from the dependence of the driving and the resisting moments on the crankshaft motion.     

纳米化纯铁在干摩擦及油润滑条件下的磨损行为研究

利用往复摩擦磨损试验机研究了深度轧制纳米化纯铁及其退火态和普通轧态纯铁在干摩擦和油润滑下的磨损行为,采用冲击划痕法和声发射划痕法研究材料的塑性变形能力,并对纳米化影响纯铁磨损行为的原因进行初步探讨.结果表明,在干摩擦条件下深度轧制纯铁的抗磨粒磨损性能较普通轧态纯铁差,抗犁削能力也较弱;在油润滑条件下,深度轧制纯铁显示出优良的耐磨性;经深度轧制后,纳米化纯铁具有较高的表面活性,但同时由于塑性的丧失只能承受较小的剪切力.     

基于高通量解析算法的复杂样品重叠气相色谱-质谱信号的快速分析

化学计量学算法为重叠气相色谱-质谱(GC-MS)信号的解析提供了有效手段,但其在计算过程中一般需要将数据进行分段处理,然后只对信号的某些区间进行解析,难以实现真正意义上的高通量分析。该文结合移动窗口目标转换因子分析(MWTTFA)和非负免疫算法(NNIA),建立了一种高通量解析方法。首先,根据所有可能存在的目标组分的标准质谱信息,利用MWTTFA检验复杂信号中存在的组分,并确定目标组分的质谱信息和洗脱时间区域。以得到的质谱信息作为后续计算的输入值,利用NNIA解析得到相应的色谱信息。采用快速升温程序对17种和42种农药混合标准样品的GC-MS信号进行分析,利用所建立的方法可在10 min内得到全部组分的色谱和质谱信息。     

基于在线HHT和SVM的汽油机轻微漏气故障识别方法

针对汽油机轻微漏气故障会被闭环反馈控制所掩盖,提出了一种基于在线希尔伯特变换(Hilbert-Huang Transform,HHT)和支持向量机(Support vector machine,SVM)的两阶段微小故障识别方法(Online HHT-SVM,OHS).第一阶段在嵌入式两滑动时间窗内通过HHT对发动机空燃比数据流进行在线时频分析,以实时获取空燃比发生异常的时刻;第二阶段通过SVM对异常时刻的数据流故障模式进行离线识别.根据氧传感器信号特征,对经验模态分解(Empirical mode decomposition,EMD)算法进行了改进,并从理论上进行了证明.基于两款发动机的实际运行数据验证了该方法的有效性.     

SWEIA艾滋病毒传染模型及应用

人类免疫缺陷病毒(HIV)是一种严重威胁生命的病毒,感染艾滋病毒患者一般经历四个阶段:i)艾滋病毒阴性的窗口期(W);ii)阳性的无症状潜伏期(E);iii)有症状期(Ⅰ);以及iv)移除阶段(A).为深入研究艾滋病传播过程,建立SWEIA艾滋病毒传染模型,定义基本再生数,分析无病与地方病平衡点的存在性和局部稳定性,根据2004至2015年中国艾滋病患者数据,采用遗传算法对SWEIA模型中参数进行估计.通过对基本再生数敏感性分析以及模型数值随参数不同而产生的变化,揭示艾滋病窗口期的接触率是影响艾滋病流行的主要原因之一.     

Dynamic Modes of One Seismic-Damping Mechanism with Frictional Bonds

The possible states of a system of interacting solids with rolling friction and unilateral sliding friction bonds are analyzed. The system can be used for seismic isolation of buildings. The structures (modes) of motion are established. The basic analytical relations are derived, which are needed to construct a dynamic model of variable structure     

用曲线大窗口平滑散斑条纹图的方法研究

提出一种计算条纹方向的简单算法,以及通过条纹方向图获得沿条纹方向的曲线窗口并对散斑条纹图进行曲线大窗口滤波的方法．实验表明此方法较好地消除了散斑条纹图的噪声,同时尽量减小了对条纹结构的损害．为从单幅散斑条纹图中应用条纹中心线法或全灰度法进一步提取相位场的后处理,奠定了良好的基础．