High-performance liquid chromatography with continuous gradient elution in screening for unknown metabolites of butoprozine directly in dog bile

This paper describes the screening for metabolites of butoprozine, a new anti-anginal drug, in dog bile by means of reverse-phase HPLC. Although it does involve a simple clean-up step to remove a substantial amount of endogenous bile compounds, this screening method nevertheless avoids extraction of metabolites and thus allows all metabolites to be introduced into the chromatographic system. A single run of 100 minutes from 100% water to 100% methanol in a linear gradient effects adequate separation of the great majority of metabolites without interference from remaining endogenous compounds. Two methods of differentiating between metabolite peaks and endogenous peaks have been worked out. The first one makes use of ¹⁴C-labeled butoprozine by measuring the amount of radioactivity in the column effluent while simultaneously recording the UV absorbance. The second method compares continuous gradient chromatograms of bile recorded before and after butoprozine administration under very similar conditions. The latter method can be applied to both radioactive and non-radioactive materials.     

Evaluation of the calibration errors on cooling of a differential scanning calorimeter using different sets of standard metals

The temperature calibration on cooling of thermal analysis instruments is important for the accurate study of the non-isothermal crystallization kinetics of semi-crystalline polymers. In previous works, a methodology was proposed for performing the calibration on cooling of differential scanning calorimeters (DSCs) with standard metals, and the calibration errors were checked using transitions of high-purity liquid crystals. In this work, alternative, physically meaningful, procedures for carrying out the calibration on cooling are analyzed and validated. The calibration errors are evaluated also with liquid crystalline transitions, when the calibration is performed with standard metals, in a wide temperature range, and when due account is taken for the need of isothermal corrections to the temperature measurements. It is shown that any pair of standard metals may be used to calibrate on cooling, that the calibration errors increase for wider working temperature ranges and that, providing that certain conditions are fulfilled, both calibration procedures yield similar results.     

Additivity Factors in the Binding of the Diethyltin(IV) Cation by Ligands Containing Amino and Carboxylic Groups at Different Ionic Strengths

Complex formation constants were determined potentiometrically (by a ISE-H⁺, glass electrode) in the systems, M²⁺ – L^z – H⁺ [M²⁺ = (C₂H₅)₂Sn²⁺, L^z = malonate, glycinate and ethylenediamine] at t = 25 ^∘C and 0.1 mol-L⁻¹≤ I/ ≤ 1 mol-L⁻¹ in NaCl_aq (0.1 mol-L⁻¹ ≤ I ≤ 0.75 mol-L⁻¹ for the ethylenediamine system). Thermodynamic values of formation constants, at infinite dilution, are [± 95% confidence interval, ^Tβ_pqr refer to the equilibrium, pM²⁺ + qL^z + rH⁺ = M_pL_qH_r^(2+z+r)]: for malonate, log₁₀ ^Tβ₁₁₀ = (5.47 ± 0.10); for glycinate, log₁₀ ^Tβ₁₁₀ = (9.54 ± 0.08), log₁₀ ^Tβ₁₁₁ = (12.97 ± 0.10); and for ethylenediamine, log₁₀ ^Tβ₁₁₀ = (10.47 ± 0.10), log₁₀ ^Tβ₁₂₀ = (16.17 ± 0.12) and log₁₀ ^Tβ₁₁₁ = (15.46 ± 0.10). The dependence on ionic strength of the formation constants was modeled by a simple Debye–Hückel type equation and by the SIT approach. By analyzing the stability of the species in the three different systems we found a simple additivity rule that can be expressed by the relationship: log₁₀ K = 6.46 n_N + 3.96 n_O − 0.60 (n_N²+ n_O²), with a mean deviation, ε(log₁₀ K) = 0.15 (K = equilibrium constant for the interaction of the organometal cation with the unprotonated or protonated ligand, n_N = number of amino groups and n_O = number of carboxylic groups of the ligand(s) involved in the formation reaction of complex species).     

卟啉超分子化合物在分子器件中的应用

分子电子器件已成为近年来的一个研究热点，卟啉类化合物因为光敏性好、性能稳定、易于修饰等优点成为分子器件研究的理想模型化合物。本文着重介绍了它在分子器件中的最新应用进展。     

Dependence of the relative retention of organic compounds on the nature and pressure of the carrier gas and on the thickness of the PEG-20M film in the capillary column

The effects of the carrier gas nature and pressure on the relative retention values of organic compounds were studied using a series of capillary columns differing in the film thickness of the polar stationary phase (PEG-20M). Relative retention depends linearly on the carrier gas pressure. This dependence becomes more pronounced in the following order of carrier gases: helium < nitrogen < carbon dioxide. The limiting relative retention at a carrier gas pressure approaching zero rather than relative retention values measured experimentally (relative retention time, Kovats retention index,etc.) is an invariant characteristic of a compound subjected to chromatography. For the carrier gases studied, the limiting retention values almost does not depend on the nature of the carrier gas used. The limiting indicating the complex absorption-adsorption nature of these parameters. Dissolution of a carrier gas in the stationary liquid phase has an effect on the relative retention. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2177–2186, December, 1997.     

Search of ligands for the amyloidogenic protein beta2-microglobulin by capillary electrophoresis and other techniques

Beta2-microglobulin (beta2-m) is a small amyloidogenic protein normally present on the surface of most nucleated cells and responsible for dialysis-related amyloidosis, which represents a severe complication of long-term hemodialysis. A therapeutic approach for this amyloidosis could be based on the stabilization of beta2-m through the binding to a small molecule, and consequent inhibition of protein misfolding and amyloid fibril formation. A few compounds have been described to weakly bind beta2-m, including the drug suramin. The lack of a binding site for nonpolypeptidic ligands on the beta2-m structure makes it difficult for both the identification of functional groups responsible for the binding and the search of hits to be optimized. The characterization of the binding properties of suramin for beta2-m by using three different techniques (surface plasmon resonance, affinity CE (ACE), ultrafiltration) is here described and the results obtained are compared. The common features of the chemical structures of the compounds known to bind the protein led us to select 200 sulfonated/suramin-like molecules from a wider chemical library on the basis of similarity rules, so as to possibly single out some interesting hits and to gain more information on the functional groups involved in the binding. The development of screening methods to test the compounds by using ultrafiltration and ACE is described.     

A novel and efficient route to diarylmethanes catalyzed by nickel(II) ion on nanoporous carbon

Much improved catalytic carbon-carbon bond-forming reactions between aryl chlorides and Grignard reagents has been achieved using nickel(II) ion on nanoporous carbon.     

HPLC of antibiotics. 1. Streptolydigin and related compounds

Two new acyltetramic acids related to streptolydigin have been isolated from fermentations of Streptomyces lydicus. The principal members of this complex were resolved by TLC on silica gel. However, the methods of detection, permanganate spray or bioautography, were not suitable for both crude fermentation broths and purified extracts. Gas chromatography is unsuitable for the detection of either underivatized or silylated streptolydigins. High performance liquid chromatography (HPLC) particularly on triethylaminoethyl cellulose is rapid and sensitive and is the method of choice for the analysis of both crude and purified samples. Using high performance liquid chromatography, two components were detected in the complex, which are not observed using any of the other chromatographic procedures.     

1,1,4,4-Tetranitrobutane-2,3-diol and its derivatives. 5. Reaction of 1,1,4,4-tetranitrobutane-2,3-diol with formaldehyde; synthesis and crystal structure of 4,4-dinitro-2,3-dihydroxytetrahydrofuran

1,1,4,4-Tetranitrobutane-2,3-diol reacts with formaldehyde, forming 2,2-dinitropropane-1,3-diol or a cyclic ether — 4,4-dinitro-2,3-dihydroxytetrahydrofuran — as a function of the reaction conditions.Institute of Chemical Physics, Chernogolovka, Russian Academy of Sciences, 142432 Chernogolovka. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2755–2759, December, 1992.