Novel Catalytic Dielectric Barrier Discharge Reactor for Gas-Phase Abatement of Isopropanol

Catalytic gas-phase abatement of air containing 250 ppm of isopropanol (IPA) was carried out with a novel dielectric barrier discharge (DBD) reactor with the inner catalytic electrode made of sintered metal fibers (SMF). The optimization of the reactor performance was carried out by varying the voltage from 12.5 to 22.5 kV and the frequency in the range 200–275 Hz. The performance was significantly improved by modifying SMF with Mn and Co oxide. Under the experimental conditions used, the MnO _x /SMF showed a higher activity towards total oxidation of IPA as compared to CoO _x /SMF and SMF electrodes. The complete destruction of 250 ppm of IPA was attained with a specific input energy of ∼235 J/L using the MnO _x /SMF catalytic electrode, whereas, the total oxidation was achieved at 760 J/L. The better performance of the MnO _x /SMF compared to other catalytic electrodes suggests the formation of short-lived active species on its surface by the in-situ decomposition of ozone.     

Perdeuterated Conjugated Polymers for Ultralow‐Frequency Magnetic Resonance of OLEDs

The formation of excitons in OLEDs is spin dependent and can be controlled by electron‐paramagnetic resonance, affecting device resistance and electroluminescence yield. We explore electrically detected magnetic resonance in the regime of very low magnetic fields (<1 mT). A pronounced feature emerges at zero field in addition to the conventional spin‐ Zeeman resonance for which the Larmor frequency matches that of the incident radiation. By comparing a conventional π‐conjugated polymer as the active material to a perdeuterated analogue, we demonstrate the interplay between the zero‐field feature and local hyperfine fields. The zero‐field peak results from a quasistatic magnetic‐field effect of the RF radiation for periods comparable to the carrier‐pair lifetime. Zeeman resonances are resolved down to 3.2 MHz, approximately twice the Larmor frequency of an electron in Earth's field. However, since reducing hyperfine fields sharpens the Zeeman peak at the cost of an increased zero‐field peak, we suggest that this result may constitute a fundamental low‐field limit of magnetic resonance in carrier‐pair‐based systems. OLEDs offer an alternative solid‐state platform to investigate the radical‐pair mechanism of magnetic‐field effects in photochemical reactions, allowing models of biological magnetoreception to be tested by measuring spin decoherence directly in the time domain by pulsed experiments.     

Validated UPLC‐MS/MS method for determination of moclobemide in human brain cell supernatant and its application to bidirectional transport study

A simple and sensitive analytical method based on ultraperformance liquid chromatography–tandem mass spectrometry (UPLC‐MS/MS) has been developed for determination of moclobemide in human brain cell monolayer as an in vitro model of blood–brain barrier. Brucine was employed as the internal standard. Moclobemide and internal standard were extracted from cell supernatant by ethyl acetate after alkalinizing with sodium hydroxide. The UPLC separation was performed on an Acquity UPLC^TM BEH C₁₈ column (50 × 2.1 mm, 1.7 µm, Waters, USA) with a mobile phase consisting of methanol–water (29.5:70.5, v/v); the water in the mobile phase contained 0.05% ammonium acetate and 0.1% formic acid. Detection of the analytes was achieved using positive ion electrospray via multiple reaction monitoring mode. The mass transitions were m/z 269.16 → 182.01 for moclobemide and m/z 395.24 → 324.15 for brucine. The extraction recovery was 83.0–83.4% and the lower limit of quantitation (LLOQ) was 1.0 ng/mL for moclobemide. The method was validated from LLOQ to 1980 ng/mL with a coefficient of determination greater than 0.999. Intra‐ and inter‐day accuracies of the method at three concentrations ranged from 89.1 to 100.9% for moclobemide with precision of 1.1–9.6%. This validated method was successfully applied to bidirectional transport study of moclobemide blood–brain barrier permeability. Copyright © 2013 John Wiley & Sons, Ltd.     

Microwave Assisted Rupture of Furoxans to Nitrile Oxides and Intermolecular Capture by Dipolarophiles

3,4-Diaroylfuroxans 1 react with various dipolarophiles 3 under microwave activation to afford the cycloadduct 4 instead of the expected isoxazole 5 in good yields in the absence of solvent.     

Development of new high‐performance visible light photoinitiators based on carbazole scaffold and their applications in 3d printing and photocomposite synthesis

In this article, new compounds based on the carbazole scaffold (DMs = DM1 and DM2, constituted by a carbazole unit connected on positions 3 and 6 to a two 4,4′‐dimethoxydiphenylamine groups and differing by the substituent present on the nitrogen heteroatom of the carbazole core) were synthesized and proposed as high‐performance visible light photoinitiators/photosensitizers for both the free‐radical polymerization of methacrylates and the cationic polymerization of epoxides upon visible light exposure using LED@405 nm. Remarkably, DM2 leads to higher final conversions than DM1. In order to study the photophysical and photochemical properties of the carbazole derivatives, different parameters were taken into account such as the light absorption, the steady‐state photolysis, and the fluorescence spectroscopy. Using different techniques such as fluorescence quenching, redox behavior, and cyclic voltammetry, we are able to discuss the photosensitization/photoinitiation reactions providing a full coherent picture of the involved chemical mechanisms. The photosensitization of the carbazole derivatives occurred predominantly via singlet excited states at the rate of the diffusion limit. Upon exposure to laser diode at 405 nm, DMs show high performance in initiating systems for 3D resins. Remarkably, DM2 can also be used in photocomposite synthesis using light‐emitting diode conveyor. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2081–2092     

Beating oscillation and Fano resonance in the laser assisted electron transmission through graphene δ-function magnetic barriers

We investigate theoretically the transmission of electrons through a pair of δ-function magnetic barriers in graphene in presence of external monochromatic, linearly polarized and CW laser field. The transmission coefficients are calculated in the framework of non-perturbative Floquet theory using the transfer matrix method. It is noted that the usual Fabry–Perot oscillations in transmission through the graphene magnetic barriers with larger inter barrier separation takes the shape of beating oscillations in presence of the external laser field. The laser assisted transmission spectra are also found to exhibit the characteristic Fano resonances (FR) for smaller values of the inter barrier separation. The appearance of the perfect node in the beating oscillation and the asymmetric Fano line shape can be controlled by varying the intensity of the laser field. The above features could provide some useful and potential information about the light - matter interactions and may be utilized in the graphene based optoelectronic device applications.     

Charge carrier mobility,photovoltaic, and electroluminescent properties of anthracene‐based conjugated polymers bearing randomly distributed side chains

This article reports on the synthesis, characterization, and properties of various anthracene‐containing poly (p‐phenylene‐ethynylene)‐alt‐poly(p‐phenylene‐vinylene) (PPE‐PPV) polymers (AnE‐PVs) bearing statistical distributions of various side chains. Primarily, the ratio of linear octyloxy and branched 2‐ethylhexyloxy side chains at the poly(p‐phenylene vinylene) (PPV) parts was varied, leading to the polymers stat, stat1, and stat2. Furthermore, polymers also containing asymmetric substituted PPV and poly(p‐phenylene ethynylene) units (bearing methoxy and 2‐ethylhexyloxy side chains) were prepared yielding stat3, stat4, and stat5. These materials exhibit a broad variation in their photovoltaic properties. It is once more shown that side chains and their distribution can crucially affect the photovoltaic device performance. The introduction of units with asymmetric substitution into these systems seems to be harmful for their utilization in photovoltaic applications. Organic field‐effect transistors were fabricated to investigate hole mobilities in these new materials. Large variance was observed, falling in the range of almost two orders of magnitude, indicating rather different π–π stacking behavior of the polymer backbones owing to side‐chain modifications. Moreover, a selection of the new polymeric systems was investigated regarding their potential for light‐emitting diode (LED) applications. Polymer LEDs using the polymers AnE‐PVstat, ‐stat3, ‐stat4, and ‐stat5, as the active layer showed turn‐on voltage of ～2 V and exhibited red light emission. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Solution‐processable and thermally cross‐linkable fluorene‐cored triple‐triphenylamines with terminal vinyl groups to enhance electroluminescence of MEH‐PPV: Synthesis,curing, and optoelectronic properties

This study reports the synthesis, curing, and optoelectronic properties of a solution‐processable, thermally cross‐linkable electron‐ and hole‐blocking material containing fluorene‐core and three periphery N‐phenyl‐N‐(4‐vinylphenyl)benzeneamine ( FTV ). The FTV exhibited good thermal stability with T_d above 478 °C in nitrogen atmosphere. The FTV is readily cross‐linked via terminal vinyl groups by heating at 160 °C for 30 min to obtain homogeneous film with excellent solvent resistance. Multilayer PLED device [ITO/PEDOT:PSS/cured‐ FTV /MEH‐PPV/Ca (50 nm)/Al (100 nm)] was successfully fabricated using solution processed. Inserting cured‐ FTV is between PEDOT:PSS and MEH‐PPV results in simultaneous reduction in hole injection from PEDOT:PSS to MEH‐PPV and blocking in electron transport from MEH‐PPV to anode. The maximum luminance and maximum current efficiency were enhanced from 1810 and 0.27 to 4640 cd/m² and 1.08 cd/A, respectively, after inserting cured‐ FTV layer. Current results demonstrate that the thermally cross‐linkable FTV enhances not only device efficiency but also film homogeneity after thermal curing. FTV is a promising electron‐ and hole‐blocking material applicable for the fabrication of multilayer PLEDs based on PPV derivatives. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2012