Development of a sensitive and reliable high performance liquid chromatography method with fluorescence detection for high-throughput analysis of multi-class mycotoxins in Coix seed

As an edible and medicinal plant, Coix seed is readily contaminated by more than one group of mycotoxins resulting in potential risk to human health. A reliable and sensitive method has been developed to determine seven mycotoxins (aflatoxins B₁, B₂, G₁, G₂, zearalenone, α-zearalenol, and β-zearalenol) simultaneously in 10 batches of Coix seed marketed in China. The method is based on a rapid ultrasound-assisted solid–liquid extraction (USLE) using methanol/water (80/20) followed by immunoaffinity column (IAC) clean-up, on-line photochemical derivatization (PCD), and high performance liquid chromatography coupled with fluorescence detection (HPLC-FLD). Careful optimization of extraction, clean-up, separation and detection conditions was accomplished to increase sample throughput and to attain rapid separation and sensitive detection. Method validation was performed by analyzing samples spiked at three different concentrations for the seven mycotoxins. Recoveries were from 73.5% to 107.3%, with relative standard deviations (RSDs) lower than 7.7%. The intra- and inter-day precisions, expressed as RSDs, were lower than 4% for all studied analytes. Limits of detection and quantification ranged from 0.01 to 50.2 μg kg⁻¹, and from 0.04 to 125.5 μg kg⁻¹, respectively, which were below the tolerance levels for mycotoxins set by the European Union. Samples that tested positive were further analyzed by HPLC tandem electrospray ionization mass spectrometry for confirmatory purposes. This is the first application of USLE-IAC-HPLC-PCD-FLD for detecting the occurrence of multi-class mycotoxins in Coix seed.     

Ammonium Determination in Water Samples by Using Opa-Nac Reagent: A Comparative Study with Nessler and Ammonium Selective Electrode Methods

A selective and sensitive method based on the ammonium derivatisation with o -phthaldialdehyde (OPA) and N -acetyl-cysteine (NAC) has been developed for ammonium determination in real water samples. The proposed procedure has been compared with ammonium reference methods such as Nessler reagent method and ammonium selective electrode. All procedures have been chemometrically tested and compared in terms of the main analytical properties. These procedures have been used to determine ammonium in unknown water samples. The OPA-NAC reagent method does not present any systematic error (proportional or constant), while Nessler reagent presents both of them for some samples assayed. The ammonium selective electrode is free of corrigible systematic errors, however presents amine interference. The OPA-NAC ammonium method is able to achieve a detection limit (LOD) of 0.07 mg/L in the sample, with a linear dynamic range up to 1.4 mg/L of ammonium.     

Development and validation of high-performance liquid chromatography method for analysis of β-CCT and its related substances

Compound 2β-carbomethoxy-3β-(4-chlorophenyl)tropane (β-CCT) is a key intermediate for the synthesis of some clinical dopamine transporter (DAT) imaging agents. Potential impurities from synthesis process of β-CCT and degradation during storage might have detrimental effect on the final imaging agents. Thus, it is necessary to guarantee the quality of β-CCT. In this study, a rapid, sensitive and accurate high-performance liquid chromatography (HPLC) method was developed and validated for the analysis of β-CCT and its related substances. The chromatographic separation was achieved on a reverse-phase phenomenex? Gemini C18 column with an isocratic mobile phase consisted of methanol, water and TFA (30:70:0.1 v/v/v). The flow rate was 1.0 mL/min at 30 °C and samples were monitored at 220 nm. The method was validated concerning system suitability, linearity, accuracy, precision, specificity, robustness and stability. The limit of detection (LOD) and the limit of quantification (LOQ) of β-CCT were 0.5 and 1.5 μg/mL, respectively. The linearity range of β-CCT was 1.5–450 μg/mL with a good linear correlation coefficient (R² = 0.9999) between the peak response and concentration. Specificity investigation through forced degradation experiments displayed that β-CCT was stable in acidic, thermal and photolytic degradation conditions, but significantly unstable in alkaline and oxidative conditions. With the developed chromatographic method, possible impurity α-CCT from synthetic process and potential degradation products could be well separated from β-CCT. Good recovery and precision were manifested in the assay method. These results indicated that the present method would be suitable for not only the quality assurance of β-CCT in regular production sample assays but also the monitoring and determination of its related substances.     

Development of GC–MS/MS method for environmental monitoring of 49 pesticide residues in food commodities in Al-Rass,Al-Qassim region,Saudi Arabia

The harmful effects of pesticide residues are a threat to our health. Therefore, the current study aimed to validate a simple method for the determination of pesticide residues in commonly consumed fruits and vegetables from Al-Rass, Al-Qassim region, Saudi Arabia. A total of 1430 samples were collected from a local market and then analyzed for monitoring of 49 pesticide residues. A quick, easy, cheap, effective, rugged, and safe (QuEChERS) multi-residue extraction method followed by gas chromatography equipped with triple-quadrupole mass spectrometry (GC–MS/MS) was successfully implemented. This 17-min-run analytical method detects and quantifies pesticide residues with acceptable validation performance parameters in terms of sensitivity, selectivity, linearity, the limit of quantification, accuracy, and precision. The linear range of the calibration curves ranged from 10 to 300 µg/L, all the pesticide LODs ranged from 0.0005 to 0.0024 mg/kg, and the pesticide LOQs ranged from 0.0011 to 0.0047 mg/kg. The recovery values at the three fortification levels ranged from 78 % to 107 %, and the precision values (expressed as RSD%) were less than 20 % for all of the investigated analytes. The results showed that 138 (9.65 %) of the analyzed samples were contaminated with pesticide residues, 40 (2.80 %) of the analyzed samples exceeded the maximum residue limit (MRL) of the European Commission regulations (EC) for pesticides residues, 98 (6.85 %) of the analyzed samples were contaminated with residues below the MRL, and 1292 (90.35 %) of the analyzed samples were pesticide residue-free. Coriander contained the highest percentage (46.88 %) of pesticide residues, particularly tetradifon that representing 18.75 % noncompliance with the MRL, followed by parsley, with 20.59 % pesticide residues (10.29 % non-compliance). Multiple pesticide residues were observed most frequently in tomatoes and dates which were contaminated with buprofezin and ethion respectively.     

A comparative study of CE-SDS,SDS-PAGE,and Simple Western: Influences of sample preparation on molecular weight determination of proteins

The development of capillary electrophoresis, especially CE-SDS devices, has led CE-SDS to become an established tool in a wide range of applications in the analysis of biopharmaceuticals and is increasingly replacing its method of origin, SDS-PAGE. The goal of this study was to evaluate the comparability of molecular weight (MW) determination especially by CE-SDS and SDS-PAGE. For ensuring comparability, model proteins that have little or no posttranslational modifications and an IgG antibody were used. Only a minor influence of sample preparation conditions, including sample buffer, temperature conditions, and different reducing agents on the MW determination were found. In contrast, the selection of the MW marker plays a decisive role in determining the accurate apparent MW of a protein. When using different MW markers, the deviation in MW determination can exceed 10%. Interestingly, CE-SDS and 10% SDS-PAGE hardly differ in their trueness of MW determination. The trueness in relation to the reference MW for each protein was calculated. Although the trueness values for the model proteins considered range between 1.00 and 1.11 using CE-SDS, they range between 0.93 and 1.03 on SDS-PAGE, depending on the experimental conditions chosen.     

A regularised boundary element formulation for contactless SAR evaluations within homogeneous and inhomogeneous head phantoms

This work presents a Boundary Element Method (BEM) formulation for contactless electromagnetic field assessments. The new scheme is based on a regularised BEM approach that requires the use of electric measurements only. The regularisation is obtained by leveraging on an extension of Calderón techniques to rectangular systems leading to well-conditioned problems independent of the discretisation density. This enables the use of highly discretized Huygens surfaces that can be consequently placed very near to the radiating source. In addition, the new regularised scheme is hybridised with both surfacic homogeneous and volumetric inhomogeneous forward BEM solvers accelerated with fast matrix–vector multiplication schemes. This allows for rapid and effective dosimetric assessments and permits the use of inhomogeneous and realistic head phantoms. Numerical results corroborate the theory and confirms the practical effectiveness of all newly proposed formulations.     

Lamb波频域逆散射全聚焦成像方法研究

Lamb波因其传播距离远、衰减小常被用于板状结构的无损检测中,在基于Lamb波损伤检测的诸多成像技术中,全聚焦方法(Total Focus Method,TFM)方法因其成像分辨率高、信噪比高而受青睐.然而Lamb波的频散效应导致时域延时量不能被准确计算,进而影响传统TFM方法对损伤定位及成像的精度;此外,既有的TFM...     

Dislocation Analysis for Large-sized Sapphire Single Crystal Grown by SAPMAC Method

In this paper,large-sized sapphire (230×210 mm,27.5 kg) was grown by SAPMAC method (sapphire growth technique with micro-pulling and shoulder-expanding at the cooled center). Dislocation peculiarity in large sapphire boule (0001) basal plane was investigated by chemical etching,scanning electron microscopy and X-ray topography method. The triangular dislocation etch pit measured is 7.6×101～8.0×102 cm-2,in which relative high-density dislocations were generated at both initial and final stages of crystal growth. The analysis of single-crystal X-ray topography shows that there are no apparent sub-grain boundaries; the dislocation lines are isolated and straight. Finally,the origins of low-density dislocation in sapphire crystal are discussed by numerical analysis method.     

国产滤纸室温燐光背景的考察和降低背景方法的研究

固体基质室温燐光法(SS-RTP)的检出限依赖于固体基质的RTP背景的高低。本文考察了七种国产滤纸在重原子存在时和不存在时的RTP背景。研究了各种降低滤纸背景的处理方法。研究结果表明,采用NaOH、β-环糊精、EDTA、乙醇和丙酮浸泡或煮沸滤纸,都能不同程度的降低滤纸背景,最大降低率为88％。KI、NaAc、Pb(Ac)_2、TlNO_3和Cscl等重原子可使滤纸背景有较大幅度的增强,而经处理的滤纸,RTP背景较未处理滤纸背景降低一倍以上,最大可降低94.5％。用NaOH溶液处理滤纸,不仅能有效地降低背景,而且能提高分析物的RTP信号。研究表明纤维素伴生物质——木素,可能是产生燐光背景的杂质之一。     

对固体圆二色光谱测试方法的再认识——兼谈“浓度效应”

对近期发展的固体圆二色(CD)光谱测试方法进行了概述、评价和比较, 着重探讨了“浓度效应”的存在使固体CD光谱失真的原因. 通过对本课题组和其他作者已报道的四种化合物的固体CD谱再测试的反思, 强调了依手性化合物的手性光谱学性质不同, 根据浓度梯度实验选择其合适测试浓度的必要性. 对固有手性的阻转异构化合物(S)-1,1'-联二萘酚(S-BINOL)进行了成膜法固体CD谱浓度梯度测试, 发现所得固体薄膜CD谱中也存在着“浓度效应”