3,7-二硝基亚氨基-2,4-二氮杂双环[3,3,0]辛烷的放热分解反应动力学

在程序升温条件下 ,用DSC研究了标题化合物的放热分解反应动力学 .用线性最小二乘法、迭代法以及二分法与最小二乘法相结合的方法 ,以积分方程、微分方程和放热速率方程拟合DSC数据 .在逻辑选择建立了微分和积分机理函数的最可几一般表达式后 ,用放热速率方程得到相应的表观活化能 (Ea)、指前因子 (A)和反应级数 (n)的值 .结果表明 :该反应的微分形式的经验动力学模式函数、Ea 和A值分别为 (1-α) 0 .44、2 30 .4kJ/mol和 10 18.16s-1.借助加热速率和所得动力学参数值 ,提出了标题化合物放热分解反应的动力学方程 .该化合物的热爆炸临界温度为 30 2 .6℃ .上述动力学参数对分析、评价标题化合物的稳定性和热变化规律十分有用 .     

New Exact Solution to （3＋1）-Dimensional Burgers Equation

In this Letter, using Ba^ecklund transformation and the new variable separation approach, we find a new general solution to the (3 1)-dimensional Burgers equation. The form of the universal formula obtained from many (2 1)-dimensional systems is extended. Abundant localized coherent structures can be found by seclecting corresponding functions appropriately.     

Baeicklund Transformation and Multiple Soliton Solutions for （3＋1）-Dimensional Potential-YTSF Equation

We study an approach to constructing multiple soliton solutions of the (3 1)-dimensional nonlinear evolution equation. We take the (3 1)-dimensional potential- YTSF equation as an example. Using the extended homogeneous balance method, one can find a Backlund transformation to decompose the (3 1)-dimensional potential-YTSF equation into a set of partial differential equations. Starting from these partial differential equations, some multiple soliton solutions for the (3 1)-dimensional potential-YTSF equation are obtained by introducing a class of formal solutions.     

Comprehensive research about the cooperative up-conversion luminescence of the ytterbium-doped oxyfluoride vitroceramics

The cooperative up-conversion blue luminescence of Yb^{3+} ion-doped oxyfluoride vitroceramic material (Yb:FOV) and the influence of co-doped Ho^{3+} ion, when excited by a 960 nm diode-laser, are studied in this paper. A strong blue 479.1 nm up-conversion luminescence of the Yb:FOV material is discovered. It is found that the 479.1 nm luminescence results from the cooperative up-conversion of the coupled states of the Yb^{3+}－Yb^{3+} clusters formed by two adjacent Yb^{3+} ions. The measured cooperative up-conversion luminescence main peak 479.1 nm of this paper is different from the characteristic fluorescence main peak of the Tb^{3+} ion positioned at about 495－504 nm wave-range. Our result coincides with all the published correct papers, whose cooperative up-conversion luminescence main peaks of the direct Yb^{3+}－Yb^{3+} clusters are all positioned at about 476－480 nm wave-range. All of these indicate that the large cooperative up-conversion blue luminescence of the direct Yb^{3+}－Yb^{3+} clusters discovered in this paper is stable. It further proves that the cooperative up-conversion green luminescence may result from the Yb^{3+}-Tb^{3+} cooperative effect. In particular, the original work of this paper improves considerably on the traditional concept by the experimental facts that the blue 479.1 nm cooperative up-conversion luminescence strength of Yb(5):FOV is 230 times greater than that of fluoride glass Yb(3):ZBLAN. This is a great development to meet the practical requirements for blue up-conversion luminescence strength. This result indicates that the large cooperative up-conversion blue luminescence could be achieved excellently by using a suitable material, such as oxyfluoride vitroceramic, which provides a better chance to form better Yb^{3+}－Yb^{3+} clusters and has less relaxation to keep the more efficient up-conversion luminescence. It is also found that impurities seriously reduce the cooperative up-conversion luminescence intensity due to the cross-relaxation from the Yb^{3+}－Yb^{3+} clusters, which means that the cooperative up-conversion blue luminescence could be further improved by pure Yb^{3+} ion-doped materials that have as few impurities as possible to reduce the cross-relaxation. The large cooperative up-conversion blue luminescence of Yb(5):FOV also comes from its higher concentration (5 mol%) of activator Yb^{3+} ion which acts well because the cooperative up-conversion blue luminescence intensity varies linearly against the square of the concentration of Yb^{3+} ions in the range of 0.5－5 mol%. In summary, the great improvement of our work on cooperative up-conversion blue luminescence results from the comprehensive enhancement of the factors of better-coupled chance of the Yb^{3+}－Yb^{3+} clusters, less cross-relaxation, better concentration contribution of Yb^{3+} activator, non-saturation, and better up-conversion luminescence efficiency.     

Yb:FAP和Yb:C_3S_2-FAP晶体光谱的温度特性和选择激发

报导了Yb :FAP和Yb :C3S2 _FAP晶体在不同温度下的吸收光谱和荧光光谱实验结果 ,研究发现由于电子_声子近共振耦合作用 ,Yb :FAP和Yb :C3S2 _FAP晶体均存在有明显的振动谱 ,Yb :FAP晶体的零声子线在低温下还劈裂为相差 10cm- 1 的两条线 .采用激光选择激发技术研究了Yb3 离子在FAP和C3S2 _FAP晶体中的格位特征 ,结果表明Yb3 离子在这两种基质中都只占据Ca(Ⅱ )格位 ,但由于CaF2 的挥发 ,导致了Ca(Ⅱ )格位的局部畸变 .     

Rare earth photoionization study by the resonant microwave cavity technique

Photoconductivity spectra of rare earth-doped insulating materials are measured using the resonant microwave cavity method. This technique is based on the detection of the cavity Q-factor changes induced by irradiation of the sample (inserted in the cavity) by a pulsed tunable laser. Results obtained with Lu₂(SiO₄)O:Ce³⁺ and BaF₂:Eu²⁺ are presented and discussed. Photoionization thresholds at 400 nm (3.1 eV) and 310 nm (4.0 eV) are measured for Lu₂(SiO₄)O:Ce³⁺ and BaF₂:Eu²⁺, respectively.     

Photorefractive Four-Wave Mixing Switches Utilizing Pockels Effect -Longitudinal and Lateral Switches-

We carried out detailed calculations for photorefractive wave-mixing switches based on one of three crystals with high electro-optic coefficients, namely, BaTiO₃, Strontium Barium Niobate (SBN (0.75)), and Potasium Sodium Strontium Barium Niobate (KNSBN). A comparison of results for the three crystals shows that a 0_-cut BaTiO³ crystal is suitable for a longitudinal switch and requires a voltage of about 80 for a 2-mm-thick crystal to induce sufficient phase mismatch. The electrodes must be transparent for the incident and diffracted beams. A 45_-cut SBN (0.75) crystal, however, is suitable for a lateral switch and requires a voltage of about 150 for a 1-mm-wide crystal. The electrodes do not need to be transparent.     

Modeling and Simulation of Saturation Gain of IR Integrated Photonic Amplifiers

IR integrated photonic amplifiers at 1.55m operation will have good foreground in optical phasedarray radars for splitters and signal processing. The saturation gain characteristics of IR integrated photonic waveguide amplifiers (taken Er³⁺Yb³⁺ co-doped phosphate glass waveguide amplifiers as an example) are studied theoretically. For the homemade laser glass materials the calculated saturation intensities are 2.22kw /cm² for signal and 10.15kw/cm² for pump. The effects of absorption saturation of signal and pump lights on the gain of amplifiers are discussed.     

Microwave–assisted synthesis of <Emphasis Type="Italic">submicrometer</Emphasis> GaO(OH) and Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> rods

Submicrometer sized gallium oxide hydroxide (GaO(OH)) and gallium oxide (Ga₂O₃) rods have been successfully fabricated on a large scale by refluxing an aqueous solution of Ga(NO₃)₃ and NH₄OH in a simple domestic microwave oven (DMO). The structures, morphologies, compositions and physical properties of the as–synthesized and calcined products have been characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), selected area energy dispersive X-ray spectroscopy (SAEDS), thermo gravimetric analysis (TGA), differential scanning calorimetry (DSC), and energy dispersive X-ray (EDX) analysis. TEM images show that submicrometer sized as–synthesized Ga O(OH) rods have diameters of 0.3–0.5 m and lengths of 3.2–3.5 m. The calcined product consists of submicrometer rods with diameters of 0.4–0.5 m and lengths of 5–5.5 m. XRD, EDX and SAED analysis together indicate that the as–synthesized product has an orthorhombic gallium oxide hydroxide (GaO(OH)) crystal structure, and that the calcined product is rhombohedral Ga₂O₃. A possible mechanism for the formation of submicrometer sized GaO(OH) rods is discussed briefly.     

Resistivity－temperature characteristics of sol gel YBa2Cu3Oy samples synthesized in flowing oxygen atmosphere

The relationship of resistivity versus synthesizing temperature of sol gel YBa_2Cu_3O_y samples was studied when prepared under flowing oxygen conditions. A set of high-temperature ρ－T curves was obtained for the whole process. After the sample finished the test measuring, its resistivity was ρ_{300}=9.83×10^{-3 }Ω·cm at room temperature. The ρ－T curve also showed that the orthorhombic－tetragonal phase transformation of sol-gel YBa_2Cu_3O_y sample occurred at 581℃ for the sample in the rising temperature process, but at 613℃ in the cooling process, lower than that of the samples made by using the conventional powder metallurgy methods.