亚微米光栅型导光板设计

提出了利用亚微米光栅制作导光板的方法,给出亚微米光栅型导光板的初始结构.用严格耦合波理论计算分析了在满足基底全反射条件的45°入射角下红(700 nm)、绿(555 nm)、蓝(465 nm)三色光垂直出射的亚微米光栅(0.651μm、0.516μm、0.433μm)在槽深0.05~0.9μm之间变化时,透射衍射效率在2%~43%之间变化.分析了亚微米光栅的作用,做出性能评价,并研究了特定范围入射角引起的衍射角变化.     

An FEM approximation for a fourth-order variational inequality of second kind

A fourth-order variational inequality of the second kind arising in a plate frictional bending problem is considered. By using regularization method, the original problem can be formulated as a differentiable variational equation, and the corresponding discrete FEM variational equation is presented afterwards. Abstract error estimates and error estimates of the approximation are derived in terms of energy norm and L^2-norm.     

快中子照相中的点扩展函数计算

 快中子照相中,基于反冲核原理探测快中子的有机闪烁体平板是普遍采用的快中子辐射转换体。模拟了D-T中子垂直入射BC400闪烁体平板,计算了不同厚度平板闪烁体的点扩展函数,对14.1 MeV快中子照相中闪烁体固有分辨率随厚度的变化进行了研究。计算结果表明,在不考虑二次中子与闪烁体作用及背景噪声等情况时,点扩展函数几乎不依赖于闪烁体厚度。同时,计算还表明在一定的分辨率范围内,由于荧光收集效率的限制,闪烁体厚度增加并不会改善图像对比度。     

ELECTRICALLY FORCED THICKNESS-SHEAR VIBRATIONS OF QUARTZ PLATE WITH NONLINEAR COUPLING TO EXTENSION

We study electrically forced nonlinear thickness-shear vibrations of a quartz plate resonator with relatively large amplitude. It is shown that thickness-shear is nonlinearly coupled to extension due to the well-known Poynting effect in nonlinear elasticity. This coupling is relatively strong when the resonant frequency of the extensional mode is about twice the resonant frequency of the thickness-shear mode. This happens when the plate length/thickness ratio assumes certain values. With this nonlinear coupling, the thickness-shear motion is no longer sinusoidal. Coupling to extension also affects energy trapping which is related to device mounting. When damping is 0.01, nonlinear coupling causes a frequency shift of the order of 10^-6 which is not insignificant,and an amplitude change of the order of 10^-8. The effects are expected to be stronger under real damping of 10^-5 or larger. To avoid nonlinear coupling to extension, certain values of the aspect ratio of the plate should be avoided.     

PARALLEL FINITE ELEMENT ANALYSIS OF HIGH FREQUENCY VIBRATIONS OF QUARTZ CRYSTAL RESONATORS ON LINUX CLUSTER

Quartz crystal resonators are typical piezoelectric acoustic wave devices for frequency control applications with mechanical vibration frequency at the radio-frequency （RF） range. Precise analyses of the vibration and deformation are generally required in the resonator design and improvement process. The considerations include the presence of electrodes, mountings, bias fields such as temperature, initial stresses, and acceleration. Naturally, the finite element method is the only effective tool for such a coupled problem with multi-physics nature. The main challenge is the extremely large size of resulted linear equations. For this reason, we have been employing the Mindlin plate equations to reduce the computational difficulty. In addition, we have to utilize the parallel computing techniques on Linux clusters, which are widely available for academic and industrial applications nowadays, to improve the computing efficiency. The general principle of our research is to use open source software components and public domain technology to reduce cost for developers and users on a Linux cluster. We start with a mesh generator specifically for quartz crystal resonators of rectangular and circular types, and the Mindlin plate equations are implemented for the finite element analysis. Computing techniques like parallel processing, sparse matrix handling, and the latest eigenvalue extraction package are integrated into the program. It is clear from our computation that the combination of these algorithms and methods on a cluster can meet the memory requirement and reduce computing time significantly.     

ACTIVE CONTROL OF A FLEXIBLE CANTILEVER PLATE WITH MULTIPLE TIME DELAYS

Active control of a flexible cantilever plate with multiple time delays is investigated using the discrete optimal control method. A controller with multiple time delays is presented. In this controller, time delay effect is incorporated in the mathematical model of the dynamic system throughout the control design and no approximations and assumptions are made in the controller derivation, so the system stability is easily guaranteed. Furthermore, this controller is available for both small time delays and large time delays. The feasibility and efficiency of the proposed controller are verified through numerical simulations in the end of this paper.     

基于解析法的X光分幅相机静态增益特性仿真

采用解析法对X光分幅相机中微通道板单孔内电子运动、碰壁和二次发射一系列过程进行了建模与求解,依托商业Lorentz-2D软件,得到了二次电子初能量分布、电子碰壁前能量分布、渡越时间分布等仿真曲线。实验测量了分幅相机的静态灵敏度曲线,与仿真结果对比分析表明：光电子首次碰撞深度是影响相机增益的重要因素,给出了修正后的增益与电压关系表达式,定性分析了工作偏压等参数对首次碰撞深度的影响。     

准随机点阵二值化Gabor波带片聚焦特性的数值计算

Fresnel波带片有多个焦点,作为单色器波长选择元件使用时会受到高级衍射的影响。而Gabor波带片只有一个焦点,有更好的聚焦特性,但制作难度较大,准随机点阵二值化Gabor波带片概念的提出则解决了这个问题。介绍了准随机点阵二值化Gabor波带片的设计,并利用优化的程序分别对Fresnel波带片和准随机点阵二值化Gabor波带片的聚焦特性进行了模拟计算,通过对计算结果进行分析比较,发现准随机点阵二值化Gabor波带片具有抑制高阶衍射的特性。     

TRANSIENT ANALYSIS OF COMPOSITE PLATES BY A LOCAL RADIAL BASIS FUNCTIONS-FINITE DIFFERENCE TECHIQUE

The use of local numerical schemes,such as finite differences produces much better conditioned matrices than global collocation radial basis functions methods.However,finite difference schemes are limi...     

HEAT TRANSFER AND PRESSURE DROP FROM LOUVERED SURFACES IN AUTOMOTIVE HEAT EXCHANGERS

An investigation of heat transfer and pressure drop from some louvered surfaces is presented. The test rig and the measuring as well as the data evaluating procedures are described. The measured data are transferred and presented in a nondimenswnal form. The heal transfer data are provided mainly as Stanton numbers versus Reynolds number, and the pressure drop is given as Darcy friction factors versus Reynolds number. For comparing the performance of the various louvered surfaces, the flow area goodness factors and the so-called volume goodness factors are presented. All the louvered surfaces have been found to be more efficient than the corresponding smooth surface. The standard multilouvered fin surfaces were found to be most efficient, but one of the new surfaces also performed very well.