SU-8光栅结构中的液晶激光特性

设计制作了SU-8光栅结构的染料掺杂手性向列相液晶激光器件,在器件正面和侧面均实现了随机激光辐射。将激光染料PM597、手性剂S-811、向列性液晶TEB30A按一定比例均匀混合,注入反平行摩擦处理的液晶盒中,器件的下基板通过光掩模法刻蚀出周期为15μm的光栅。利用532 nm的Nd∶YAG固体脉冲激光器作为泵浦源,器件的侧面既在580～590 nm范围内出现了多个离散分立的随机激光辐射峰,FWHM约0.19 nm,又在579～585 nm范围内出现独立的两个激光辐射峰,FWHM约0.19 nm;在器件正面获得了584～590 nm范围的随机激光辐射谱,FWHM约0.17 nm。加热器件至61℃,液晶相变为各向同性态,器件侧面仍出现了波长约590.60 nm、FWHM约0.24 nm的激光辐射峰。分析得出,液晶盒中引入SU-8光栅结构后,光子同时在液晶分子间多重散射和SU-8光栅中布拉格反射获得反馈放大,两种机制相辅相成。器件侧面出现的独立激光辐射峰主要由SU-8光栅布拉格反射提供反馈放大形成,而器件侧面和正面的随机激光辐射峰主要由液晶分子间多重散射提供反馈放大形成。     

一种新型双参量光纤布喇格光栅传感器的研制

介绍了一种新型的具有双参量测量功能的光纤布喇格光栅传感器.该传感器采用了特殊的结构,安装了两个不同中心波长的光纤布喇格光栅,可以实现两曲面之间狭小间隙的微小位移和温度的同时测量.实验表明,该传感器结构紧凑、体积小,具有良好的重复性和稳定性,位移测量误差不超过±10 μm,温度测量误差不超过±2℃.     

角分辨光电子能谱光束线1200line/mm光栅研制

国家同步辐射实验室新建了覆盖5～40 eV的低能区高分辨率角分辨光电子能谱光束线.其球面光栅单色仪包含了三块光栅,即300,600和1200 line/mm球面层式(Laminar)光栅.采用全息离子束刻蚀工艺,在硅光栅基片上成功地刻蚀出1200 line/mm、占空比0.35、槽深35 nm、有效刻划面积大于120 ...     

Surface profile optimization of antireflection gratings for solar cells

The solar cell efficiency can be improved by antireflection gratings. In this paper, the antireflection gratings with different symmetrical surface profiles are investigated by numerical simulations based on the Rigorous Coupled-Wave Analysis. Simulated results show that the antireflection performance of sharp profile such as quadratic profile has a significant improvement compared with triangular and parabolic profiles, while the top cutoff in the grating tip will severely influence the antireflection performance. Meanwhile, proper length of flat region between grating features in the nonclose-packed triangular antireflection grating can have better antireflection performance than the close-packed counterpart for the same grating period and height. Such antireflection gratings with different surface profiles may offer attractive solutions to current commercial silicon solar cell, as well as organic and other semiconductor material based solar cells.     

基于光纤侧边抛磨技术的醋酸浓度光纤传感器

演示了两种利用光纤侧边抛磨技术制备的用于醋酸浓度检测的光纤传感器.其中一种光纤传感器采用轮式抛磨法对光纤光栅的光栅区包层进行侧边抛磨加工而成,将醋酸溶液覆盖于光纤光栅的抛磨区,利用侧边抛磨光纤光栅反射峰波长的变化对醋酸浓度进行测量;另一种光纤传感器采用轮式抛磨法对普通单模光纤包层进行侧边抛磨加工而成,将醋酸溶液覆盖于光纤抛磨区,利用抛磨光纤插入损耗的变化对醋酸浓度进行测量.两种光纤传感器的实验都表明:光纤包层抛磨表面与纤芯的距离越小,测量分辨率越高.剩余包层厚度为 0 μm 的侧边抛磨光纤光栅传感器测量醋酸溶液浓度分辨率为6.67%;剩余包层厚度为O.5μm 的侧边抛磨光纤传感器测量醋酸溶液浓度分辨率为0.55%.     

Temperature or strain induced adjustable-chirp characteristics of uniform fibre grating with tapered metal coating

Temperature and strain characteristics of uniform fibre grating with tapered metal coatings have been analysed theoretically, by which adjustable chirp characteristics of such gratings are shown. Electroplating is adopted to fabricate such gratings, and the tapered metal coating is obtained by gradually drawing the fibre grating out of the solution during the process of electroplating. The gradually changing cross-sectional area of the metal coating is calculated by a newly suggested numerical method. By combining the theoretical and numerical simulation analyses, the gratings' characteristics are given at various temperatures and strains. The results obtained using such a method are also testified by experiments.     

A cheap and practical FBG temperature sensor utilizing a long-period grating in a photonic crystal fiber

A whole temperature sensor in one package utilizing a fiber Bragg grating (FBG) made in a conventional single-mode fiber and which uses a long-period grating (LPG) made in a photonic crystal fiber is proposed and experimentally demonstrated. The function of the interrogation is that the wavelength change of the FBG with environmental temperature is transferred to the intensity of the output via the LPG. Utilizing the temperature-insensitivity of the LPG in the PCF, the interrogation is stable and enables a cheap and practical temperature measurement system with a wide dynamic range.     

Theoretical analysis of optical coupling properties of the waveguide grating with novel rectangular structure

For the waveguide grating photocoupler with novel structure [Yu XQ, Zhang X, Wong KS, Xu GB, Xu XG, Ren Y, et al. A fabrication of coupling grating in the polymeric waveguide by using two-photon initiated photopolymerization. Mater Lett 2004;58:3879–83. [1]; Yu XQ, Zhang X, Xu GB, Zhao HP, He W, Shao ZS, et al. Fabrication of grating waveguide and coupling grating using two-photon initiated photopolymerization. Chem J Chin Univ 2004;25(10):1931–3 (in Chinese). [2]], the electric fields of the TE guided wave and the TE radiating wave are obtained by solving the Helmholtz equation in the spatial rectangular coordinates. And then the relations between the loss coefficient and the different structure parameters of the waveguide and grating are analyzed by using the mode coupling theories, and their corresponding numerical simulation results are given. In the end the result obtained for this novel structure and that for conventional rectangle structure are compared, and the difference and the sameness are obtained.     

光纤光栅反射谱的放缩特性

利用介质光波导耦合模理论,证明了弱扰动的光纤光栅具有一个重要特性--放缩特性;即如果光纤光栅的折射率扰动分布沿光纤轴放大α倍,同时扰动强度缩小α倍,那么光栅的反射谱就以共振波长为中心在波长轴上缩小α倍.     

一种多波长窄线宽环形掺铒光纤激光器

本文提出了一种利用多个光纤光栅串接来实现环形掺铒光纤多波长，窄线宽激光器的新颖方法，并在实验中验证了这一设计的合理性，得到了稳定的双波长输出．